Heat transfer to bodies in a high-speed rarified-gas stream (open access)

Heat transfer to bodies in a high-speed rarified-gas stream

Report presents the results of an investigation to determine the equilibrium temperature and heat-transfer coefficients for transverse cylinders in a high-speed stream of rarefied gas measured over a range of Knudsen numbers (ratio of molecular-mean-free path to cylinder diameter) from 0.025 to 11.8 and for Mach numbers from 2.0 to 3.3. The range of free-stream Reynolds numbers was from 0.28 to 203. The models tested were 0.0010-, 0.0050-, 0.030-, 0.051-, 0.080-, and 0.126-inch -diameter cylinders held normal to the stream.
Date: May 14, 1951
Creator: Stalder, Jackson R.; Goodwin, Glen & Creager, Marcus O.
System: The UNT Digital Library
Growth of Disturbances in a Flame-Generated Shear Region (open access)

Growth of Disturbances in a Flame-Generated Shear Region

Results are presented of an experimental and theoretical investigation of the growth of transverse velocity disturbances in the shear region caused by a flame in a duct. In the theoretical stability analysis, a flow field arising from a flame in a duct was analyzed. The flow was neutrally stable to symmetric disturbances and unstable to antisymmetric ones. In the experimental part of the program disturbances of various frequencies were imposed on a flame stabilized in a duct, and the effects were measured by shadow photography and photomultiplier-probe surveys.
Date: October 14, 1957
Creator: Blackshear, Perry L., Jr.
System: The UNT Digital Library
Bodies of revolution having minimum drag at high supersonic airspeeds (open access)

Bodies of revolution having minimum drag at high supersonic airspeeds

Approximate shapes of nonlifting bodies having minimum pressure foredrag at high supersonic airspeeds are calculated. With the aid of Newton's law of resistance, the investigation is carried out for various combinations of the conditions of given body length, base diameter, surface area, and volume. In general, it is found that when body length is fixed, the body has a blunt nose; whereas, when the length is not fixed, the body has a sharp nose. The additional effect of curvature of the flow over the surface is investigated to determine its influence on the shapes for minimum drag. The effect is to increase the bluntness of the shapes in the region of the nose and the curvature in the region downstream of the nose. These shape modifications have, according to calculation, only a slight tendency to reduce drag. Several bodies of revolution of fineness ratios 3 and 5, including the calculated shapes of minimum drag for given length and base diameter and for given base diameter and surface area, were tested at Mach numbers from 2.73 to 6.28. A comparison of theoretical and experimental foredrag coefficients indicates that the calculated minimum-drag bodies are reasonable approximations to the correct shape.
Date: December 14, 1955
Creator: Eggers, A. J., Jr.; Resnikoff, Meyer M. & Dennis, David H.
System: The UNT Digital Library
Investigation of Downwash, Sidewash, and Mach Number Distribution Behind a Rectangular Wing at a Mach Number of 2.41 (open access)

Investigation of Downwash, Sidewash, and Mach Number Distribution Behind a Rectangular Wing at a Mach Number of 2.41

"An investigation of the nature of the flow field behind a rectangular wing of circular arc cross section has been conducted in the Langley 9-inch supersonic tunnel. Pitot- and static-pressure surveys covering a region of flow behind the wing have been made together with detailed pitot surveys throughout the region of the wake. In addition, the flow direction has been measured by means of a weathercocking vane. Theoretical calculations have been made to obtain the variation of both downwash and sidewash with angle of attack by using the superposition method of Lagerstrom, Graham, and Grosslight" (p. 1).
Date: September 14, 1950
Creator: Adamson, David & Boatright, William B.
System: The UNT Digital Library
A study of the characteristics of human-pilot control response to simulated aircraft lateral motions (open access)

A study of the characteristics of human-pilot control response to simulated aircraft lateral motions

Report presents the results of studies made in an attempt to provide information on the control operations of the human pilot. These studies included an investigation of the ability of pilots to control simulated unstable yawing oscillations, a study of the basic characteristics of human-pilot control response, and a study to determine whether and to what extent pilot control response can be represented in an analytical form.
Date: March 14, 1952
Creator: Cheatham, Donald C.
System: The UNT Digital Library
A Comparison of the Spanwise Loading Calculated by Various Methods With Experimental Loadings Obtained on a 45 Degree Sweptback Wing of Aspect Ratio 8.02 at a Reynolds Number of 4.0 X 10(6) (open access)

A Comparison of the Spanwise Loading Calculated by Various Methods With Experimental Loadings Obtained on a 45 Degree Sweptback Wing of Aspect Ratio 8.02 at a Reynolds Number of 4.0 X 10(6)

"This report compares the experimental force and moment data obtained by pressure measurements on a wing of aspect ratio 8.02, 45 degree sweptback of the quarter-chord line, taper ratio of 0.45, and NACA 63(sub 1)A012 airfoil sections with the calculated loadings obtained by the standard methods proposed by Weissinger, Falkner, and Multopp, as well as by several variations of these methods" (p. 1175).
Date: August 14, 1951
Creator: Schneider, William C.
System: The UNT Digital Library
Method for calculating the aerodynamic loading on an oscillating finite wing in subsonic and sonic flow (open access)

Method for calculating the aerodynamic loading on an oscillating finite wing in subsonic and sonic flow

A method is presented for calculating the loading on a finite wing oscillating in subsonic or sonic flow. The method is applicable to any plan form and may be used for determining the loading on deformed wings. The procedure is approximate and requires numerical integration over the wing surface.
Date: March 14, 1956
Creator: Runyan, Harry L. & Woolston, Donald S.
System: The UNT Digital Library
A summary and analysis of the low-speed longitudinal characteristics of swept wings at high Reynolds number (open access)

A summary and analysis of the low-speed longitudinal characteristics of swept wings at high Reynolds number

An analysis of the longitudinal characteristics of swept wings which is based on available large-scale low-speed data and supplemented with low-scale data when feasible is presented. The emphasis has been placed on the differentiation of the characteristics by a differentiation between the basic flow phenomenon involved. Insofar as possible all large-scale data available as of August 15, 1951 have been summarized in tabular form for ready reference.
Date: May 14, 1952
Creator: Furlong, G. Chester & McHugh, James G.
System: The UNT Digital Library
Theoretical combustion performance of several high-energy fuels for ramjet engines (open access)

Theoretical combustion performance of several high-energy fuels for ramjet engines

An analytical evaluation of the air and fuel specific-impulse characteristics of magnesium, magnesium octene-1 slurries, aluminum, aluminum octene-1 slurries, boron, boron octene-1 slurries, carbon, hydrogen, alpha-methylnaphthalene, diborane, pentaborane, and octene-1 is presented. While chemical equilibrium was assumed in the combustion process, the expansion was assumed to occur at fixed composition.
Date: September 14, 1953
Creator: Tower, Leonard K.; Breitwieser, Roland & Gammon, Benson E.
System: The UNT Digital Library