None

In 2006, the U.S. Department of Energy initiated the Seismic Boreholes Project (SBP) to emplace boreholes at the Waste Treatment Plant (WTP) site in order to obtain direct shear wave velocity (Vs) measurements and other physical property measurements in Columbia River basalt and interbedded sediments of the Ellensburg Formation. The goal was to reduce the uncertainty in the response spectra and seismic design basis, and potentially recover design margin for the WTP. The characterization effort within the deep boreholes included 1) downhole measurements of the velocity properties of the suprabasalt, basalt, and sedimentary interbed sequences, 2) downhole measurements of the density of the subsurface basalt and sediments, and 3) geologic studies to confirm the geometry of the contact between the various basalt and interbedded sediments through examination of retrieved core from the core hole and data collected through geophysical logging of each borehole. This report describes the results of the geologic studies from three mud-rotary boreholes and one cored borehole at the WTP. All four boreholes penetrated the entire Saddle Mountains Basalt and the upper part of the Wanapum Basalt where thick sedimentary interbeds occur between the lava flows. The basalt flows penetrated in Saddle Mountains Basalt included the Umatilla …

The External Flowsheet Review Team (EFRT) has identified the issues relating to the Waste Treatment and Immobilization Plant (WTP) pipe plugging. Per the review’s executive summary, “Piping that transports slurries will plug unless it is properly designed to minimize this risk. This design approach has not been followed consistently, which will lead to frequent shutdowns due to line plugging.” To evaluate the potential for plugging, testing was performed to determine critical velocities for the complex WTP piping layout. Critical velocity is defined as the point at which a moving bed of particles begins to form on the pipe bottom during slurry-transport operations. Pressure drops across the fittings of the test pipeline were measured with differential pressure transducers, from which the critical velocities were determined. A WTP prototype flush system was installed and tested upon the completion of the pressure-drop measurements. We also provide the data for the overflow relief system represented by a WTP complex piping geometry with a non-Newtonian slurry. A waste simulant composed of alumina (nominally 50 μm in diameter) suspended in a kaolin clay slurry was used for this testing. The target composition of the simulant was 10 vol% alumina in a suspending medium with a yield …

Expression of the A and B forms of progesterone receptor (PR) in an appropriate ratio is critical for mammary development. Mammary glands of PR-A transgenic mice, carrying an additional A form of PR as a transgene, exhibit morphological features associated with the development of mammary tumors. Our objective was to determine the roles of estrogen (E) and progesterone (P) in the genesis of mammary hyperplasias/preneoplasias in PR-A transgenics. We subjected PR-A mice to hormonal treatments and analyzed mammary glands for the presence of hyperplasias and used BrdU incorporation to measure proliferation. Quantitative image analysis was carried out to compare levels of latency-associated peptide and transforming growth factor beta 1 (TGF{beta}1) between PR-A and PR-B transgenics. Basement membrane disruption was examined by immunofluorescence and proteolytic activity by zymography. The hyperplastic phenotype of PR-A transgenics is inhibited by ovariectomy, and is reversed by treatment with E + P. Studies using the antiestrogen ICI 182,780 or antiprogestins RU486 or ZK 98,299 show that the increase in proliferation requires signaling through E/estrogen receptor alpha but is not sufficient to give rise to hyperplasias, whereas signaling through P/PR has little impact on proliferation but is essential for the manifestation of hyperplasias. Increased proliferation is correlated …

CDF has resumed the top quark mass measurement with upgraded detectors and Tevatron complex. High statistics should allow us to determine the top mass with an uncertainty of a few GeV/c{sup 2} by the end of Run II. The current measured value, using an integrated luminosity of {approx} 108 pb{sup -1}, is 177.5{sub -9.4}{sup +12.7} (stat.) {+-} 7.1(syst.) GeV/c{sup 2} (lepton + jets with one b-jet tagged mode: the current best mode), which is consistent with RunI measurements.

This document explores the geochemical reactions likely to occur when hydrofluoric acid is spilled on Savannah River Site (SRS) soil. In particular, we evaluate the potential of environmental damage from a one-time release of concentrated hydrofluoric acid into a trench. According to interviews with personnel involved, sometime between 1955 and 1960 drums of 50-60 per cent hydrofluoric acid were disposed in a trench in the Central Shops area. The method of disposal suggests that most of the acid would have been released at the time of burial. No evidence of drum disposal or acidic pH values was found. Therefore, the Soil and Groundwater Closure Projects group requested that we evaluate potential risk by examining the major geochemical interactions expected between hydrofluoric acid and soil. The geochemical calculations in this report were done with The Geochemist's Workbench (Registered). This program uses an extended Debye-Huckel method for calculating activity coefficients. The conclusions of this report are accurate, but some of the intermediate steps may have higher uncertainty. Hydrofluoric acid disposed in a trench in the area would have reacted with soil kaolinite to neutralize the pH to a value of about 4.2. Based on conservative assumptions, this would have occurred within the …

OAK-B135 An overview of our work as well as two recent publications are contained in this scientific report. The work reported here revolves around the discovery of new coherent nonlinear kinetic waves in laser produced plasmas, we call KEEN waves (kinetic, electrostatic electron nonlinear waves), and optical mixing experiments on the Imega laser system at LLE with blue-green light for the exploration of ways to suppress parametric instabilities in long scale length, long pulsewidth laser-plasmas such as those which will be found on NIF or LMJ.

We describe a technique for the generation of an isolated burst of X-ray radiation with a duration of {approx} 100 attoseconds in a free electron laser (FEL) employing self-amplified spontaneous emission. Our scheme relies on an initial interaction of the electron beam with an ultra-short laser pulse in a one-period wiggler followed by compression in a dispersive section. The result of this interaction is to create a sub-femtosecond slice of the electron beam with enhanced growth rates for FEL amplification. After many gain lengths through the FEL undulator, the X-ray output from this slice dominates the radiation of the entire bunch. We consider the impact of various effects on the efficiency of this technique. Different configurations are considered in order to realize various timing structures for the resulting radiation.

Titanium alloy degradation modes are reviewed in relation to their performance in repository environments. General corrosion, localized corrosion, stress corrosion cracking, hydrogen induced cracking, microbially influenced corrosion, and radiation-assisted corrosion of Ti alloys are considered. With respect to the Ti Grade 7 drip shields selected for emplacement in the repository at Yucca Mountain, general corrosion, hydrogen induced cracking, and radiation-assisted corrosion will not lead to failure within the 10,000 year regulatory period; stress corrosion cracking (in the absence of disruptive events) is of no consequence to barrier performance; and localized corrosion and microbially influenced corrosion are not expected to occur. To facilitate the discussion, Ti Grades 2, 5, 7, 9, 11, 12, 16, 17, 18, and 24 are included in this review.

Operation of SOFCs at intermediate temperatures (500-800 C) requires new combinations of electrolyte and electrode materials that will provide both rapid ion transport across the electrolyte and electrode-electrolyte interfaces and efficient electrocatalysis of the oxygen reduction and fuel oxidation reactions. This project concentrates on materials and issues associated with cathode performance that are known to become limiting factors as the operating temperature is reduced. The specific objectives of the proposed research are to develop cathode materials that meet the electrode performance targets of 1.0 W/cm{sup 2} at 0.7 V in combination with YSZ at 700 C and with GDC, LSGM or bismuth oxide based electrolytes at 600 C. The performance targets imply an area specific resistance of {approx}0.5 {Omega}cm{sup 2} for the total cell. The research strategy is to investigate both established classes of materials and new candidates as cathodes, to determine fundamental performance parameters such as bulk diffusion, surface reactivity and interfacial transfer, and to couple these parameters to performance in single cell tests. The initial choices for study are perovskite oxides based on Sr substituted LaFeO{sub 3}, where significant data in single cell tests exists at PNNL for cathodes on both YSZ and CSO/YSZ, and of Ln{sub 2}NiO{sub …

The invention is a door actuator and alignment apparatus for opening and closing the 15,000-pound horizontally sliding door of a storage overpack. The door actuator includes a ball screw mounted horizontally on a rigid frame including a pair of door panel support rails. An electrically powered ball nut moves along the ball screw. The ball nut rotating device is attached to a carriage. The carriage attachment to the sliding door is horizontally pivoting. Additional alignment features include precision cam followers attached to the rails and rail guides attached to the carriage.

It should be noted that the focus of the research changed somewhat during the course of the current award. The initial focus is indicated by the title of the current grant, ''The Magnesium Branch of the Chlorophyll Biosynthetic Pathway''. During the current grant period, Dr. Robert Willows, a postdoctoral associate, joined the faculty of McQuarie University in Australia. When he left my lab, we decided that he should independently pursue research on structure/function relationships in Mg chelatase and that our laboratories would collaborate on regulatory studies of this enzyme. Also, during the current award period, I began collaborating with Dr. Ariane Atteia and Mr. Robert van Lis, who were at the time located at the Autonomous University of Mexico. Dr. Atteia has since joined my laboratory and Mr. van Lis will also do so when he obtains his Ph.D. in the near future. These individuals bring to the laboratory their interests and expertise in the respiratory components of Chlamydomonas and their desire to become experts in tetrapyrrole metabolism. Recently, in a collaboration with Dr. David Bollivar, a former postdoctoral associate who is now at Illinois Wesleyan University, and Dr. Caroline Walker, who was at Clemson University but has since left …

During the last decade the scientific computing community has optimized many applications for execution on superscalar computing platforms. The recent arrival of the Japanese Earth Simulator has revived interest in vector architectures especially in the US. It is important to examine how to port our current scientific applications to the new vector platforms and how to achieve high performance. The success of porting these applications will also influence the acceptance of new vector architectures. In this paper, we first investigate the memory performance characteristics of the Cray X1, a recently released vector platform, and determine the most influential performance factors. Then, we examine how to optimize applications tuned on superscalar platforms for the Cray X1 using its performance characteristics as guidelines. Finally, we evaluate the different types of optimizations used, the effort for their implementations, and whether they provide any performance benefits when ported back to superscalar platforms.

This Acceptance Test Procedure (ATP) provides for the inspection and testing of the new Pumping Instrumentation and Control (PIC) skid designed as ''R''. The ATP will be performed after the construction of the PIC skid in the fabrication shop.

The purpose of these calculations is to develop the material balances for documentation of the Canister Storage Building (CSB) Process Flow Diagram (PFD) and future reference. The attached mass balances were prepared to support revision two of the PFD for the CSB. The calculations refer to diagram H-2-825869.

The purpose of this document is to provide a comparison of the estimated immobilized low-activity waste (LAW) disposal system performance against established performance objectives using the beat estimates for parameters and models to describe the system. The principal advances in knowledge since the last performance assessment (known as the 1998 ILAW PA [Mann 1998a]) have been in site specific information and data on the waste form performance for BNFL, Inc. relevant glass formulations. The white paper also estimates the maximum release rates for technetium and other key radionuclides and chemicals from the waste form. Finally, this white paper provides limited information on the impact of changes in waste form loading.

This document describe the software programs for the Programmable Logic Controller and the Datable Access Module for Pumping Instrumentation and Control skid ''P''. The Appendices contains copies of the printouts of these software programs.

We present the type Ia rate measurement based on two EROS supernova search campaigns (in 1999 and 2000). Sixteen supernovae identified as type Ia were discovered. The measurement of the detection efficiency, using a Monte Carlo simulation, provides the type Ia supernova explosion rate at a redshift {approx} 0.13. The result is 0.125{sub -0.034-0.028}{sup +0.044+0.028} h{sub 70}{sup 2} SNu where 1 SNu = 1 SN/10{sup 10} L{sub {circle_dot}}{sup B}/century. This value is compatible with the previous EROS measurement (Hardin et al. 2000), done with a much smaller sample, at a similar redshift. Comparison with other values at different redshifts suggests an evolution of the type Ia supernova rate.

Fast, two-dimensional, soft x-ray imaging is a powerful technique for the study of MHD instabilities in tokamak plasmas. We have constructed an ultra-fast frame rate soft x-ray camera for the National Spherical Torus Experiment. It is based on a recently developed 64 x 64 pixel CCD camera capable of capturing 300 frames at up to 500,000 frames per second. A pinhole aperture images the plasma soft x-ray emission (0.2-10 keV) onto a P47 scintillator deposited on a fiber-optic faceplate; the scintillator visible light output is detected and amplified by a demagnifying image intensifier and lens-coupled to the CCD chip. A selection of beryllium foils provides discrimination of low-energy emission. The system is installed on NSTX with a wide-angle tangential view of the plasma. Initial plasma data and an assessment of the system performance are presented.

The origin of surface core-level shift (SCLS) of Pd thin films on Pt(111) substrate is investigated. At sub-monolayer coverage of Pd thin films, the splitting of Pd 3d core level peaks indicate the contribution of both initial and final-state of photo-ionization processes while there is almost no change on valence band (VB) spectra. When the coverage of Pd reaches to single monolayer, the final-state relaxation effect on the Pd 3d vanishes and only the initial-state effect, a negative SCLS, is present. Also, the VB spectrum at Pd monolayer films shows a clear band narrowing, that is the origin of the negative SCLS at monolayer coverage. As the Pd coverage is increased to more than monolayer thickness, the Pd 3d peaks start to show the surface layer contribution from second and third layers, positive SCLS, and the VB spectrum shows even narrower band width, possibly due to the formation of surface states and strained effect of Pd adlayers on top of the first pseudomorphic layer.

None

Etching plays an important role in the production of superconducting cavities (SRF). As other laboratories engaged in RF superconductivity R and D did, FNAL is also developing a facility for the chemical etching of niobium (Nb) cavities. Two techniques are common accepted for cavity etching: (1) chemical etching--buffered chemical polishing (BCP); and (2) Electropolishing (EP). Among them, at FNAL it was decided to pursue chemical etching, which is considered a reliable technique tested by several labs for many years. In the past, numerous mixtures of acids have been tested leading to the actual buffered chemical polishing mix (BCP) characterized by the following composition by volume: 1 of HF 49 %wt; 1 of HNO{sub 3} 69.5 %wt; 2 of H{sub 3}PO{sub 4} 85 %wt. Because of the dangerous nature of the chemicals involved, safety considerations require the development of a proper process and a reliable control algorithm. For the post-processing rinsing of the cavities, one needs to know the expected pH of the water used to rinse the cavity. On the other hand, for early detection of leaks in the hydraulic system, which is done by measuring the conductivity of the rinsing water used in the process, one needs to understand …

Back surface reflectors have the potential to improve thermophotovoltaic (TPV) device performance though the recirculation of infrared photons. The ''hybrid'' back-surface reflector (BSR) TPV cell approach allows one to construct BSRs for TPV devices using conventional, high efficiency, GaInAsSb-based TPV material. The design, fabrication, and measurements of hybrid BSR-TPV cells are described. The BSR was shown to provide a 4 mV improvement in open-circuit voltage under a constant shortcircuit current, which is comparable to the 5 mV improvement theoretically predicted. Larger improvements in open-circuit voltage are expected in the future with materials improvements.

This Acceptance Test Report (ATR) provides the test results for the inspection and testing of the new Pumping Instrumentation and Control (PIC) skid designed as ''Q''. The ATR summaries the results and provides a copy of the ATP and inspections in the Appendix.