Report presenting a friction, wear, and endurance-lift study made with bonded films of mixed oxides containing lead monoxide (PbO) as the main component. The coatings lubricated over the entire temperature range, but were far more effective from 500 to 1250 degrees Fahrenheit than at the lower temperatures. Results regarding the effect of silica additions on coating formation, determination of coating composition, effect of coating thickness on friction and wear, effect of temperature on friction and wear, and endurance properties are provided.

Memorandum presenting the detailed blade-element performance of a five-stage axial-flow compressor for analysis purposes as well as to provide a contribution to the growing body of information necessary for continuing improvement in designing compressors. Results regarding overall and stage performance, blade-element performance, rotor blade-element performance, stator blade-element performance, comparison with design, consideration of boundary-layer blockage effects, and solution of equilibrium equation are provided.

From Introduction: "This report presents the results of an analysis to determine the coolant flow and pressure requirements for a particular return-flow turbine rooter blade design utilizing hydrogen, helium, or air as the coolant."

From Introduction: "This paper presents results of an analysis of shear, bending-moment, and torque loads measured on the vertical tail during rudder-step, rudder-pulse, aileron-roll, and steady-sideslip maneuvers. In order to assess effects of Mach number and altitude, the maneuvers were performed at altitudes of 15,000, 25,000, and 35,000 feet and Mach numbers from 0.49 to 0.82."

This quarterly progress discusses the ongoing work at the Oak Ridge National Laboratory for the quarter ending in March 10, 1952. Topics discussed include reactor theory and design, shielding research, materials research, and includes appendixes with supplemental information.

Twelve uranium-magnesium fuel material samples have been irradiated in the MTR at the request of the Pile metallurgy Unit. These samples were 0.40 inch in diameter by 1.5 inches long and were canned in Zircalloy-2 capsules. The uranium used in these specimens was in the form of chips which packs about 50 volume percent. Six of the samples contained a matrix of pure magnesium and the other six contained an alloy matrix of magnesium - 1.4 weight percent silicon. Two specimens of each matrix material were irradiated to 1000 MWD/T and a like number to 5000 MWD/T. Bend tests were performed on the samples and on unirradiated control samples to secure a measure of the effect of radiation exposure on the physical properties of the material.