The following report follows the studies of electroplating on uranium and concurrent metallurgical clodding.

The proposed ORNL Research Reactor is designed to serve as a general purpose research tool delivering a maximum thermal flux of 8x10^13 n/cm2-sec at the initial power level of five megawatts. Operation at power levels up to ten megawatts is proposed for such items as sufficient cooling capacity is available to handle the increased heat load. The reactor will use MTR-type fuel elements and beryllium reflector pieces in a 7 x 9 grid with moderation and cooling provided by forced circulation of demineralized water. The reactor tanks are submerged in a barytes concrete pool, filled with water, which serves as a biological shield. Experimental facilities include two 18" diameter "Engineering Test Facilities" and six 6" diameter beam holes. In addition, access to the core is available through the water of the pool. The result on the surrounding population of release to the atmosphere of a large fraction of the radioactive material in the core has been computed by two methods. It is shown that under certain conditions off-area personnel could be subjected to greater than the maximum permissible exposure. An analysis of the maximum hazard caused by the release of the entire contents of the core to the local watershed …

Abstract. An analysis is made of a proposal to obtain neutrons of 15-25 Kev energy by moderating fast neutrons in aluminum and then reflecting off titanium. The fluxes calculated do not significantly exceed those obtainable from a standard antimony-beryllium photoneutron source. Two appendices treat aspects of the transport of neutrons through a slab of finite thickness.

This memorandum sets forth a recommended uniform basis for designing the ORN shield.This includes design values for power level and emergent radiation, standards values for various material properties, and basic radiation intensities.

When a one-half ounce spherical charge of high explosive is detonated over a flat plane bounded by a 5 degree incline, the type of phenomenon encountered depends on the distance from ground zero to a beginning of the incline. If this distance is 48" the wave assumes a smooth contour on the plane. Detailed investigation of the shock velocity above the plane reveals that there is a pressure gradient along the shock front for a considerable region which replaces the usual triple point.