Security systems and security procedures for the AFRRI reactor, the University of Maryland TRIGA reactor, and the University of Virginia CAVALIER and UVAR reactors are described.

None

Reaction kinetic measurements on the hydrochlorination of SiCl/sub 4/ and mg silicon metal in the presence of a copper catalyst were last reported as a function of reaction temperature, reactor pressure and H/sub 2//SiCl/sub 4/ ratio, 3 SiCl/sub 4/ + 2 H/sub 2/ + Si ..-->.. 4 SiHCl/sub 3/. The same reaction was repeated at a lower catalyst loading of 2 wt%. In the presence of 2 wt% cuprous chloride (based on silicon metal), the hydrochlorination reaction rate is doubled to give about the same performance as those obtained at a higher copper catalyst loading. The effect of particle size distribution of the mg silicon metal on the hydrochlorination reaction rate was studied. Reaction kinetic measurements were made on 150 x 400 mesh Si and on 32 x 65 mesh Si in addition to the standard 65 x 150 mesh Si used in previous studies. Results of these experiments show that the reaction rate is essentially independent of the silicon metal particle size. Thus, the reaction occuring on the Si metal surface is the rate-determining step. Mass transfer via diffusion of reactants and product is not rate-limiting. A plausible mechanism of the hydrochlorination reaction is discussed.

This report on the Sensitivity of Mission Analysis and Trade-off Studies provides an analysis of the sensitivity of the results of previous mission analysis and performance specification studies to the possible variations of the values of significant parameters as projected to the year 1985. These parameters include vehicle usage by purpose, driving cycles, trip lengths, ownership projections, and life-cycle costs. Tabulated data are included from calculations with variations in these parameters. (LCL)

We will describe our optical laser pumped xuv Laser Program. To date, we have concentrated our efforts on exploding foil amplifier designs using Ne-like n=3p to 3s inversion schemes. We will describe our latest modeling results as well as measurements which demonstrate output power near the 1 MW level at 206 and 209 A and lasing at wavelengths as short as 106 A.

Evaluate the long-term retention of several facilities associated with the PNNL Capability Replacement Laboratory and other Hanfor mission needs. WCH prepared a mitigation plan for three scenarios with different release dates for specific buildings. The evaluations present a proposed plan for providing utility services to retained facilities in support of a long-term (+20 year) lifespan in addition to temporary services to buildings with specified delayed release dates.

Clouds of electrons in the vacuum chambers of accelerators of positively charged particle beams present a serious limitation for operation of these machines at high currents. Because of the size of these accelerators, it is difficult to probe the low energy electron clouds over substantial lengths of the beam pipe. We applied a novel technique to directly measure the electron cloud density via the phase shift induced in a TE wave which is independently excited and transmitted over a straight section of the accelerator. The modulation in the wave transmission which appear to increase in depth when the clearing solenoids are switched off, seem to be directly correlated to the electron cloud density in the section. Furthermore, we expect a larger phase shift of a wave transmitted through magnetic dipole field regions if the transmitted wave couples with the gyration motion of the electrons. We have used this technique to measure the average electron cloud density (ECD) specifically for the first time in magnetic field regions of a new 4-dipole chicane in the positron ring of the PEP-II collider at SLAC. In this paper we present and discuss the measurements taken in the Low Energy Ring (LER) between 2006 and …

The U.S. Nuclear Regulatory Commission (NRC) requested that the Oak Ridge Institute for Science and Education (ORISE) perform a confirmatory survey on the Emergency Operations Facility (EOF) at the Connecticut Yankee Haddam Neck Plant (HNP) in Haddam, Connecticut

Beam instability caused by the electron cloud has been observed in positron and proton storage rings, and it is expected to be a limiting factor in the performance of future colliders [1-3]. The effect is expected to be particularly severe in magnetic field regions. To test possible mitigation methods in magnetic fields, we have installed a new 4-dipole chicane experiment in the PEP-II Low Energy Ring (LER) at SLAC with both bare and TiN-coated aluminum chambers. In particular, we have observed a large variation of the electron flux at the chamber wall as a function of the chicane dipole field. We infer this is a new high order resonance effect where the energy gained by the electrons in the positron beam depends on the phase of the electron cyclotron motion with respect to the bunch crossing, leading to a modulation of the secondary electron production. Presumably the cloud density is modulated as well and this resonance effect could be used to reduce its magnitude in future colliders. We present the experimental results obtained during January 2008 until the April final shut-down of the PEP-II machine.

It is commonly believed that in confining vector-like gauge theories the center and chiral symmetry realizations are parametrically entangled, and if phase transitions occur, they must take place around the strong scale {Lambda}{sup -1} of the gauge theory. We demonstrate that (non-thermal) vector-like theories formulated on R{sup 3} x S{sup 1} where S{sup 1} is a spatial circle exhibit new dynamical scales and new phenomena. There are chiral phase transitions taking place at {Lambda}{sup -1}/N{sub c} in the absence of any change in center symmetry. {Lambda}{sup -1}/N{sub c}, invisible in (planar) perturbation theory, is also the scale where abelian versus non-abelian confinement regimes meet. Large N{sub c} volume independence (a working Eguchi-Kawai reduction) provides new insights and independently confirms the existence of these scales. We show that certain phases and scales are outside the reach of holographic (supergravity) modeling of QCD.

Many automated image-based applications have need of finding small spots in a variably noisy image. For humans, it is relatively easy to distinguish objects from local surroundings no matter what else may be in the image. We attempt to capture this distinguishing capability computationally by calculating a measurement that estimates the strength of signal within an object versus the noise in its local neighborhood. First, we hypothesize various sizes for the object and corresponding background areas. Then, we compute the Local Area Signal to Noise Ratio (LASNR) at every pixel in the image, resulting in a new image with LASNR values for each pixel. All pixels exceeding a pre-selected LASNR value become seed pixels, or initiation points, and are grown to include the full area extent of the object. Since growing the seed is a separate operation from finding the seed, each object can be any size and shape. Thus, the overall process is a 2-stage segmentation method that first finds object seeds and then grows them to find the full extent of the object. This algorithm was designed, optimized and is in daily use for the accurate and rapid inspection of optics from a large laser system (National Ignition …

In the title compound, the Sr-N distances are 2.624 (3) and 2.676 (3) Angstroms. The Sr-centroid distances are 2.571 and 2.561 Angstroms. The N-C-C-N torsion angle in the bipyridine ligand is 2.2 (4){sup o}. Interestingly, the bipyridine ligand is tilted. The angle between the plane defined by Sr1, N1 and N2 and the plane defined by the 12 atoms of the bipyridine ligand is 10.7{sup o}.

The project objectives were to determine the nanoscale to molecular scale structure of the interface between muscovite mica and aqueous solutions containing various sorbates and to explore systematics that control the incorporation of inorganic and organic chemical components during aging of nanoparticles of iron-oxides and aluminosilicate clays. The basal surface of phyllosilicates is a primary sorbent of environmental contaminants, natural organic matter, and nutrients. Micas are also superb atomically-flat substrates used in materials science and surface physics applications. We applied X-ray scattering techniques using high brilliance synchrotron radiation to investigate molecular-scale details of mica’s interface structure in solutions containing common and toxic cations, anions, and natural organic molecules. Nanoparticles are ubiquitous in the environment and have a high capacity for sorbing contaminants through the combined effects of their high surface areas and pH-dependent surface charge. Aging of nanoparticles from metastable to stable phases can be inhibited by sorption of nonstructural components, but exact mechanisms are unknown. We synthesized Fe-oxides and aluminosilicate clay minerals from aqueous solutions in the presence of selected anions, and organic molecules, and quantified the uptake of these additives during aging and some implications for nanoparticle formation.

Laser wakefield particle accelerators have shown the potential to generate electric fields thousands of times higher than those of conventional accelerators. The resulting extremely short particle acceleration distance could yield a potential new compact source of energetic electrons and radiation, with wide applications from medicine to physics. Physicists investigate laser-plasma internal dynamics by running particle-in-cell simulations; however, this generates a large dataset that requires time-consuming, manual inspection by experts in order to detect key features such as beam formation. This paper describes a framework to automate the data analysis and classification of simulation data. First, we propose a new method to identify locations with high density of particles in the space-time domain, based on maximum extremum point detection on the particle distribution. We analyze high density electron regions using a lifetime diagram by organizing and pruning the maximum extrema as nodes in a minimum spanning tree. Second, we partition the multivariate data using fuzzy clustering to detect time steps in a experiment that may contain a high quality electron beam. Finally, we combine results from fuzzy clustering and bunch lifetime analysis to estimate spatially confined beams. We demonstrate our algorithms successfully on four different simulation datasets.

This paper introduces an adaptive mesh and algorithmrefinement method for fluctuating hydrodynamics. This particle-continuumhybrid simulates the dynamics of a compressible fluid with thermalfluctuations. The particle algorithm is direct simulation Monte Carlo(DSMC), a molecular-level scheme based on the Boltzmann equation. Thecontinuum algorithm is based on the Landau-Lifshitz Navier-Stokes (LLNS)equations, which incorporate thermal fluctuations into macroscopichydrodynamics by using stochastic fluxes. It uses a recently-developedsolver for LLNS, based on third-order Runge-Kutta. We present numericaltests of systems in and out of equilibrium, including time-dependentsystems, and demonstrate dynamic adaptive refinement by the computationof a moving shock wave. Mean system behavior and second moment statisticsof our simulations match theoretical values and benchmarks well. We findthat particular attention should be paid to the spectrum of the flux atthe interface between the particle and continuum methods, specificallyfor the non-hydrodynamic (kinetic) time scales.

SLAC is studying an option of building a high brightness synchrotron light source machine, PEP-X, in the existing PEP-II tunnel [1]. The new machine will replace the PEPII High Energy Ring (HER) with the goal of achieving an ultra low emittance of {approx} 0.1 nm-rad at 4.5 GeV. The PEPX will utilize the same layout as in the PEP-II with 6 arcs and 6 long straight sections. The existing RF and injection systems will be re-used. The two HER FODO arcs will be replaced with the DBA arcs providing 30 dispersion free 4.26 m sections for magnetic undulators. The other four arcs will be replaced with the TME lattice for attaining the low emittance. Finally, a 89.3 m long damping wiggler with 10 cm period and 1.5 T maximum magnetic field will be installed in a long straight section to reduce the natural emittance to 0.094 nm-rad. The PEP-X dynamic aperture was studied and found sufficient for a vertical injection.

Beam instability caused by the electron cloud has been observed in positron and proton storage rings and it is expected to be a limiting factor in the performance of the positron Damping Ring (DR) of future Linear Colliders such as ILC and CLIC [1, 2]. In the Positron Low Energy Ring (LER) of the PEP-II accelerator, we have installed vacuum chambers with rectangular grooves in a straight magnetic-free section to test this promising possible electron cloud mitigation technique. We have also installed a special chamber to monitor the secondary electron yield of TiN and TiZrV (NEG) coating, Copper, Stainless Steel and Aluminum under the effect of electron and photon conditioning in situ in the beam line. In this paper, we describe the ongoing R&D effort to mitigate the electron cloud effect for the ILC damping ring, the latest results on in situ secondary electron yield conditioning and recent update on the groove tests in PEP-II.

We have searched for time modulation of the electron capture decay probability of 142Pm in an attempt to confirm a recent claim from a group at the Gesellschaft fur Schwerionenforschung (GSI). We produced 142Pm via the 124Sn(23Na, 5n)142Pm reaction at the Berkeley 88-Inch Cyclotron with a bombardment time short compared to the reported modulation period. Isotope selection by the Berkeley Gas-filled Separator is followed by implantation and a long period of monitoring the 142Nd K alpha x-rays from the daughter. The decay time spectrum of the x-rays is well-described by a simple exponential and the measured half-life of 40.68(53) seconds is consistent with the accepted value. We observed no oscillatory modulation at the proposed frequency at a level 31 times smaller than that reported by Litvinov (Phys. Lett. B 664 (2008) 162). A literature search for previous experiments that might have been sensitive to the reported modulation uncovered another example in 142Eu electron-capture decay. A reanalysis of the published data shows no oscillatory behavior.

We have successfully conducted a series of experiments involving scattering of high energy pions and protons from a target containing polarized protons. Results of some of these experiments were reported at this conference, and in the literature. Proton polarizations as high as 65% have been measured; the average polarization during sustained data-taking has been typically 45%.

Neutron-absorbing Fe-based amorphous-metal coatings have been developed that are more corrosion resistant than other criticality-control materials, including Al-B{sub 4}C composites, borated stainless steels, and Ni-Cr-Mo-Gd alloys. The presence of relatively high concentration of boron in these coatings not only enhances its neutron-absorption capability, but also enables these coatings to exist in the amorphous state. Exceptional corrosion resistance has been achieved with these Fe-based amorphous-metal alloys through additions of chromium, molybdenum, and tungsten. The addition of rare earth elements such as yttrium has lowered the critical cooling rate of these materials, thereby rendering them more easily processed. Containers used for the storage of nuclear materials, and protected from corrosion through the application of amorphous metal coatings, would have greatly enhanced service lives, and would therefore provide greater long-term safety. Amorphous alloy powders have been successfully produced in multi-ton quantities with gas atomization, and applied to several half-scale spent fuel storage containers and criticality control structures with the high-velocity oxy-fuel (HVOF) thermal spray process. Salt fog testing and neutron radiography of these prototypes indicates that such an approach is viable for the production of large-scale industrial-scale facilities and containers. The use of these durable neutron-absorbing materials to coat stainless steel containers and …

The formation and growth of sigma phase in 2205 duplex stainless steel was observed and measured in real time using synchrotron radiation during 10 hr isothermal heat treatments at temperatures between 700 C and 850 C. Sigma formed in near-equilibrium quantities during the isothermal holds, starting from a microstructure which contained a balanced mixture of metastable ferrite and austenite. In situ synchrotron diffraction continuously monitored the transformation, and these results were compared to those predicted by thermodynamic calculations. Differences between the calculated and measured amounts of sigma, ferrite and austenite suggest that the thermodynamic calculations underpredict the sigma dissolution temperature by approximately 50 C. The data were further analyzed using a modified Johnson-Mehl-Avrami (JMA) approach to determine kinetic parameters for sigma formation over this temperature range. The initial JMA exponent, n, at low fractions of sigma was found to be approximately 7.0, however, towards the end of the transformation, n decreased to values of approximately 0.75. The change in the JMA exponent was attributed to a change in the transformation mechanism from discontinuous precipitation with increasing nucleation rate, to growth of the existing sigma phase after nucleation site saturation occurred. Because of this change in mechanism, it was not possible …

The experimental and theoretical status of the ''near perfect fluid'' at RHIC is discussed. While the hydrodynamic paradigm for understanding collisions at RHIC is well established, there remain many important open questions to address in order to understand its relevance and scope. It is also a crucial issue to understand how the early equilibration is achieved, requiring insight into the active degrees of freedom at early times.

We report on a novel sensing technique combining photonics and microelectromechanical systems (MEMS) for the detection and monitoring of gas emissions for critical environmental, medical, and industrial applications. We discuss how MEMS-tunable vertical-cavity surface-emitting lasers (VCSELs) can be exploited for in-situ detection and NIR spectroscopy of several gases, such as O{sub 2}, N{sub 2}O, CO{sub x}, CH{sub 4}, HF, HCl, etc., with estimated sensitivities between 0.1 and 20 ppm on footprints {approx}10{sup -3} mm{sup 3}. The VCSELs can be electrostatically tuned with a continuous wavelength shift up to 20 nm, allowing for unambiguous NIR signature determination. Selective concentration analysis in heterogeneous gas compositions is enabled, thus paving the way to an integrated optical platform for multiplexed gas identification by bandgap and device engineering. We will discuss here, in particular, our efforts on the development of a 760 nm AlGaAs based tunable VCSEL for O{sub 2} detection.

The strain degradation of critical current density has been analytically and experimentally investigated for multifilamentary superconducting composites produced in a bronze core geometry. Analytic results were obtained from a computer program (MAXIMSUPER) which predicts the stresses and strains in composites as a result of thermal and axial loading. Tensile test data for Nb/sub 3/Sn are described. It is believed that the strain dependence of the critical current found in Nb/sub 3/Sn is due to strain enhanced martensitic transformation.