During the operation of the silicon tracker, the ladders will be in direct thermal contact with a cooling channel. The expected operating temperature of the cooling channel is 0 C, maintained by a cooling fluid whose bulk temperature is below 0 C. The assembly temperature is assumed to be 22 C. Due to the mis-match of material expansion coefficients, thermal stresses will be induced in the epoxy, beryllium, and silicon of the ladders. Calculations are presented here as well as some thermal cycling results on test samples. Shown in Figures 1 and 2 are perspective views of the top and bottom of a 3 chip ladder. The silicon temperature within the ladders will not be uniform due to the relative location of the heat dissipating components and the cooling channel. As an example the following plot demonstrates the expected temperature distribution in the 3 chip single sided ladder during operation. Under expected operating conditions of 0.75 W hybrid component power dissipation and 0.5 W per SVX II chip, the temperature profile is shown for two situations of how the ladder is constructed. The cooling channel corresponds roughly to locations on the silicon between 32 and 42 mm. The silicon in …

The purpose of this analysis is to calculate the number densities and isotopic weight percentages of the standard materials to be used in the neutronics (criticality and radiation shielding) evaluations by the Waste Package Development Department. The objective of this analysis is to provide material number density information which can be referenced by future neutronics design analyses, such as for those supporting the Conceptual Design Report.

The Next Generation Geothermal Power Plants (NGGPP) study provides the firm estimates - in the public domain - of the cost and performance of U.S. geothermal systems and their main components in the early 1990s. The study was funded by the U.S. Department of Energy Geothermal Research Program, managed for DOE by Evan Hughes of the Electric Power Research Institute, Palo Alto, CA, and conducted by John Brugman and others of the CE Holt Consulting Firm, Pasadena, CA. The printed NGGPP reports contain detailed data on the cost and performance for the flash steam cycles that were characterized, but not for the binary cycles. The nine Tables in this document are the detailed data sheets on cost and performance for the air cooled binary systems that were studied in the NGGPP.

The hydrologic properties of selected aquifer systems underlying the Milhaven and Girard sites in Georgia were determined through a series of aquifer performance tests performed from October, 1994 to January, 1995. At the Milhaven site, the systems under investigation consisted of the upper, middle and lower components of the Upper Floridan, the lower Dublin, and the lower Midville aquifers. At the Dublin site, only the lower Dublin and lower Midville aquifers were tested. In addition, the hydrologic properties of the lower Midville aquifer underlying the P, B and D Areas at the Savannah River Site were determined by a series of aquifer tests conducted in 1993 and 1994. The tests generally consisted of collecting water level and atmospheric data for 24 hours followed by a 72 hour pump test and a subsequent 72 hour recovery period. These tests were designed to determine the aquifer properties over a large area, to determine whether any hydrologic boundaries existed in the area, and to find out if leakance could be induced through the confining units which separated the aquifer units.

None

None

The existing 28 double-shell tanks (DSTS) at Hanford are currently planned to continue operation through the year 2028 when disposal schedules show removal of waste. This schedule will place the DSTs in a service life window of 4O to 60 years depending on tank construction date and actual retirement date. This paper examines corrosion- related life-limiting conditions of DSTs and reports the results of remaining useful life models developed for estimating remaining tank life. Three models based on controllable parameters such as temperature, chemistry, and relative humidity are presented for estimates to the year in which a particular DST may receive a breach in the primary tank due to pitting in the liquid or vapor region. Pitting is believed to be the life-limiting condition for DSTs,however, the region of the most aggressive pitting (vapor space or liquid) requires further investigation. The results of the models presented suggest none of the existing DSTs should fail by through-wall pitting until well beyond scheduled retrieval in 2028. The estimates of tank breach years (the year in which a tank may be expected to breach the primary tank wall) range from 2056 for pitting corrosion in the liquid region of tank 104-AW to beyond …

The overall contract objectives are to: (1) demonstrate repeatability of performance and preparation procedure of two high activity, high alpha iron Fischer-Tropsch catalysts synthesized at Texas A&M University (TAMU) during the DOE Contract DE-AC22-89PC89868; (2) seek potential improvements in the catalyst performance through variations in process conditions, pretreatment procedures and/or modifications in catalyst synthesis; (3) investigate performance of catalysts in a small scale bubble column slurry reactor, and (4) investigate feasibility of producing catalysts on a large scale in collaboration with a catalyst manufacturer. The performance of an iron, and iron-copper-silica catalyst are described.

This Project Management Plan establishes the organization, plans, and systems for management of Project W-320 as defined in DOE Order 4700.1, Project Management System (DOE 1987). The sluicing is for retrieving high-heat waste from single shell tank 241-C-106.

This document is a plan for testing four different flow meters for use in the primary exhaust ventilation ducts of Double Shell Tanks on the hydrogen watch list that do not already have this capability. This currently includes tanks 241-AW-101, 241-AN-103, 241-AN-104, 241-AN-105, and 241-SY-103. The anticipated airflow velocity in these tanks range from 0.25 m/s(50 ft/min) to 1.78 m/s (350 ft/min). Past experiences at Hanford are forcing the evaluation and selection of instruments to be used at the low flow and relatively high humidity conditions found in these tanks. Based on the results of this test, a flow meter shall be chosen for installation in the primary exhaust ventilation ducts of the above mentioned waste tanks.

During this period, work was continued on understanding the attrition of precipitated iron catalysts and work initiated on synthesizing catalysts containing silica binders. Use of a sedigraph particle size analyzer with an ultrasonic probe provides a simple method to test the strength of catalyst agglomerates, allowing the strength comparison of silica and hematite catalysts (the former is considerably stronger). Study of Fe/silica interactions was continued. Addition of a colloidal silica precursor to calcined Fe{sub 2}O{sub 3} catalyst had no detrimental effect on reducibility of the hematite to {alpha}-Fe. XRD and electron microscopy will be used to analyze the crystal structure and types of C present in samples from long Fischer-Tropsch runs.

This document provides; a decision analysis summary; problem statement; constraints, requirements, and assumptions; decision criteria; intermediate waste feed staging system options and alternatives generation and screening; intermediate waste feed staging system design concepts; intermediate waste feed staging system alternative evaluation and analysis; and open issues and actions.

The purpose of this document is to outline the K Basins 30 ton crane qualification strategy for use in the Spent Nuclear Fuel Project fuel relocation campaign.

This document contains the Software Design Description for Phase II of the SACS Project, an Impact Level 3Q system.

This document summarizes the information on the historical uses, present status, and the sampling and analysis results of waste stored in Tank 241-T-108. This report supports the requirements of Tri-Party Agreement Milestone M-44-09.

The Advanced Recovery and Integrated Extraction System (ARIES) demonstration combines various technologies, some of which were/are being developed under previous/other Department of Energy (DOE) funded programs. ARIES is an overall processing system for the dismantlement of nuclear weapon primaries. The program will demonstrate dismantlement of nuclear weapons and retrieval of the plutonium into a form that is compatible with long term storage and that is inspectable in an unclassified form appropriate for the application of traditional international safeguards. The success of the ARIES demonstration would lead to the development of a transportable modular or other facility type systems for weapons dismantlement to be used at other DOE sites as well as in other countries.

Two slurry reactor tests were completed in continuation of our studies on the effect of pretreatment conditions on catalyst reactivity and selectivity. Exceptionally good performance was obtained in run SA-2186, using the new pretreatment developed at Texas A&M University. The work on catalyst characterization by temperature programmed and isothermal reduction on a variety of iron catalysts, with different amounts of promoters, has been continued. These studies are complementing our work on pretreatment effect research, and provide additional insights into the effect of pretreatment procedures on the reduction behavior of iron catalysts. The overall objectives are to: (1) demonstrate repeatability of performance and preparation procedure of two high activity, high alpha iron Fischer-Tropsch catalysts synthesized at Texas A&M University; (2) seek potential improvements in the catalysts performance through variation in process condition, pretreatment procedures and/or modifications in catalyst synthesis; (3) investigate performance of catalysts in a small bubble column slurry reactor; and (4) investigate feasibility of producing catalysts on a large scale in collaboration with a catalyst manufacturer.

Nuclear waste is presently stored in 177 underground storage tanks at -the U. S. Department of Energy`s Hanford Site in Washington State. The storage tanks are of two construction types, 149 single-shell tanks (SSTS) and 28 double-shell tanks (DSTs). No waste has been added to the SSTs since 1980. However, the DSTs are configured to receive additional waste from site waste generators. The overall waste inventory is time dependent and strongly influenced by present and future tank farm operations. These operations include waste evaporation, retrieval, pretreatment, and processing; waste generated from various site facilities; and SST waste inventory transferred to the DSTS. A risk-based simulation model was developed to replicate the waste inventory through the year 2015. The DST waste,,; were divided into three waste types (aging, complexed, @md non-complexed) that were simulated in the model. For each of the three waste types, statistical analyses were performed and the time-de,Pendent waste volumes at the ``mean`` and ``90% confidence level`` were compared with existing DST capacity. Several ``off-normal`` operation scenarios were also analyzed using the risk-based simulation model. Mitigating actions or fallback positions were modeled where off- normal scenarios indicated that capacity shortfalls could potentially occur. The results indicated that selected …

The objective of this effort was to delineate the vertical distribution and concentration of anthropogenic radionuclides in the subsurface surrounding nine boreholes in the 100-N Area available for geophysical logging with the Radionuclide Logging System (RLS). Cesium was defined in eight boreholes, and the ninth hole was found to not contain any such radionuclides.

Production and decay (CP) asymmetries at {mu}{sup +}{mu}{sup {minus}} collider, in extensions of the Standard Model (SM) are reported. Production asymmetries appear to be very promising for a large range of parameters, decays are less effective. Importance of flavor- changing scalar currents involving the top are emphasized. At lepton colliders, the top-anticharm final state is uniquely suited for such searches. At a muon collider there is the novel possibility of tree level {mu}{sup +}{mu}{sup {minus}} {r_arrow} t{ovr c}. This talk is based on works done in collaboration with David Atwood and Laura Reina. 10 refs., 8 figs.

The QCD structure of the electroweak bosons is reviewed and the lepton structure function is defined and calculated. The leading order splitting functions of electron into quarks are extracted, showing an important contribution from {gamma}-Z interference. Leading logarithmic QCD evolution equations are constructed and solved in the asymptotic region where log{sup 2} behavior of the Parton densities is observed. Possible applications with clear manifestation of ``resolved`` photon and weak bosons are discussed. 8 refs., 3 figs.

Several key operating variables affecting off-gas flammability in a slurry-fed radioactive waste glass melter are discussed, and the methods used to prevent potential off-gas flammability are presented. Two models have played a central role in developing such methods. The first model attempts to describe the chemical events occurring during the calcining and melting steps using a multistage thermodynamic equilibrium approach, and it calculates the compositions of glass and calcine gases. Volatile feed components and calcine gases are fed to the second model which then predicts the process dynamics of the entire melter off-gas system including off-gas flammability under both steady state and various transient operating conditions. Results of recent simulation runs are also compared with available data

The purpose of this report is to motivate and outline a program of data analysis, for data obtained from radar returns from ocean surfaces perturbed by internal waves and wind-wave interactions. The ultimate aims of this analysis are to provide the appropriate statistics of the signals returned from these ocean surfaces for: (1) use in implementing and evaluating optimum and near-optimum signal processing procedures for detecting and evaluating (i.e., measuring) these internal wave effects and, (2) to provide quantitative physical insight into both the surface scatter and subsurface mechanisms which determine the received radar signals. Here the focus is initially on the needed statistics of the radar returns. These are primarily: (i) the (instantaneous) amplitude and envelope probability densities, (pdf`s) and distributions (PDFS) of the returns and, (ii) analogous statistics for the intensities (associated with the pixel data). Also required are: (iii) space-time covariance data of the returns, for further improvement of detection capabilities. Preliminary evidence and earlier experiments suggest that these data [(i), (ii)] are nongaussian and strongly so at times. This in turn, if not properly taken into account, can greatly degrade signal detection in the usual weak-signal regimes [1],[2].

To investigate transient binary nucleation, both qualitatively and quantitatively, we numerically solved the birth-death equations for vapor-to-liquid phase transitions. We found that in its early transient stages, binary nucleation rarely, if ever, occurs via the saddle point. Instead most binary systems pass through a temporary stage in which the region of maximum flux extends over a ridge on the free energy surface before reaching the state of saddle point nucleation. Both the number of particles formed and their composition may be affected, and this could be very important for nucleation in glasses and other condensed mixtures for which timescales are very long. In order to plan experiments, accurate estimates of the time lag are important. We therefore directly calculated the time lag for the saddle point flux using our numerical results and compared it with the available analytical predictions. Although the analytical results over-estimate the time lag by factors of 2-6, the numerical results followed the predicted analytical trends quite closely under most conditions.