The Integrated Data Base Program has compiled historic data on inventories and characteristics of both commercial and DOE spent nuclear fuel; also, commercial and US government-owned radioactive wastes through December 31, 1993. These data are based on the most reliable information available from government sources, the open literature, technical reports, and direct contacts. The information forecasted is consistent with the latest US Department of Energy/Energy Information Administration projections of US commercial nuclear power growth and the expected DOE-related and private industrial and institutional activities. The radioactive materials considered, on a chapter-by-chapter basis, are spent nuclear fuel, high-level waste, transuranic waste, low-level waste, commercial uranium mill tailings, DOE Environmental Restoration Program wastes, commercial reactor and fuel-cycle facility decommissioning wastes, and mixed (hazardous and radioactive) low-level waste. For most of these categories, current and projected inventories are given the calendar-year 2030, and the radioactivity and thermal power are calculated based on reported or estimated isotopic compositions. In addition, characteristics and current inventories are reported for miscellaneous radioactive materials that may require geologic disposal. 256 refs., 38 figs., 141 tabs.

This document establishes the initial hazard categorization for K-Basin fuel encapsulation and storage in the 100 K Area of the Hanford site. The Hazard Categorization for K-Basins addresses the potential for release of radioactive and non-radioactive hazardous material located in the K-Basins and their supporting facilities. The Hazard Categorization covers the hazards associated with normal K-Basin fuel storage and handling operations, fuel encapsulation, sludge encapsulation, and canister clean-up and disposal. The criteria categorizes a facility based on total curies per radionuclide located in the facility. Tables 5-3 and 5-4 display the results in section 5.0. In accordance with DOE-STD-1027 and the analysis provided in section 5.0, the K East Basin fuel encapsulation and storage activity and the K West Basin storage are classified as a {open_quotes}Category 2{close_quotes} Facility.

The U.S. Department of Energy (DOE) chartered the Phosphoric Acid Fuel-Cell (PAFC) Bus Program to demonstrate the feasibility of fuel cells in heavy-duty transportation systems. As part of this program, PAFC- powered buses are being built to meet transit industry design and performance standards. Test-bed bus-1 (TBB-1) was designed in 1993 and integrated in March 1994. TBB-2 and TBB-3 are under construction and should be integrated in early 1995. In 1987 Phase I of the program began with the development and testing of two conceptual system designs- liquid- and air-cooled systems. The liquid-cooled PAFC system was chosen to continue, through a competitive award, into Phase H, beginning in 1991. Three hybrid buses, which combine fuel-cell and battery technologies, were designed during Phase III. After completing Phase II, DOE plans a comprehensive performance testing program (Phase HI) to verify that the buses meet stringent transit industry requirements. The Phase III study will evaluate the PAFC bus and compare it to a conventional diesel bus. This NREL study assesses the environmental, health, and safety (EH&S) issues that may affect the commercialization of the PAFC bus. Because safety is a critical factor for consumer acceptance of new transportation-based technologies the study focuses on …

We report on preliminary measurements of the inclusive single muon and dimuon cross sections in p{bar p} collisions at {radical}s = 1.8 TeV using the D0 detector at the Fermilab collider. From these results, we extract the cross section for b-quark production for the kinematic range {vert_bar}yb{vert_bar} < 1.0 and 6 < p{sub t}{sup b} < 50 GeV/c. We also report measurements on the J/{psi} production, and correlations between muons in dimuon events.

Explosive bonding is a bonding method in which the controlled energy of a detonating explosive is used to create a metallurgical bonding between two or more similar or dissimilar materials. Since 1991, a number of explosive-bonding joints have been designed for high-thermal-load ultrahigh-vacuum (UHV) compatible components in the Advanced Photon Source. A series of standardized explosive bonded joint units has also been designed and tested, such as: oxygen-free copper (OFHC) to stainless-steel vacuum joints for slits and shutters, GlidCop to stainless-steel vacuum joints for fixed masks, and GlidCop to OFHC thermal and mechanical joints for shutter face-plates, etc. The design and test results for the explosive bonding units to be used in the Advanced Photon Source front ends and beamlines will be discussed in this paper.

The HAZEBROOK event was detonated in hole U10bh of the Nevada Test Site. Detonation time was 7:20 AM PST on February 3, 1987. No subsidence was observed. Radiation arrivals were detected to a depth of 122 m in the emplacement hole; however, no radiation was detected above ground. The HAZEBROOK event containment was satisfactory.

Residual radioactive material guidelines for 13 radionuclides (americium-241; cobalt-60; cesium-137; europium-152, -154, and -155; plutonium-238, -239, and -240; strontium-90; and uranium-234, -235, and -238) were derived for Operable Unit (OU) IV at Brookhaven National Laboratory. This site has been identified for remedial action under the Comprehensive Environmental Response, Compensation, and Liability Act of 1980, as amended by the Superfund Amendments and Reauthorization Act of 1986. Single-nuclide guidelines were derived on the basis of the requirement that the 50-year committed effective dose equivalent to a hypothetical individual who lives or works in the immediate vicinity of OU IV should not exceed a dose constraint of 30 mrem/yr following remedial action for the current use and plausible future use scenarios or a dose limit of 100 mrem/yr for plausible but less likely future use scenarios. The US Department of Energy (DOE) residual radioactive material guideline computer code, RESRAD, was used in this evaluation; RESRAD implements the methodology described in the DOE manual for determining residual radioactive material guidelines. Four potential scenarios were considered; each assumed that, for a period of 1,000 years following remedial action, the site would be used without radiological restrictions. The four scenarios varied with regard to the type …

The phase stability of C15 HfV{sub 2} was studied by specific heat measurements. The elastic constants of C15 HfV{sub 2} were measured by the resonant ultrasound spectroscopy. Total energy and electronic structure of C15 intermetallic compounds MV{sub 2} (M = Zr, Hf and Ta) were calculated using the linear muffin tin orbital (LMTO) method. The band structures at X-point near the Fermi level were used to understand the anomalous shear moduli of the C15 HfV{sub 2} and ZrV{sub 2}. It was found that the double degeneracy with a linear dispersion relation of electronic levels at the x-point near the Fermi surface is mainly responsible for the C15 anomalous elasticity at high temperatures. The densities of states at Fermi level and the geometry of the Fermi surface were used to explain the low temperature phase instability of C15 HfV{sub 2} and ZrV{sub 2} and the stability of C15 TaV{sub 2}. The relationship between the anomalous elasticity and structural instability of C15 HfV{sub 2} and ZrV{sub 2} were also studied.

On December 7, 1992, a 1.8-kW{sub ac} utility-interconnect photovoltaic (PV) system using amorphous silicon modules was brought on-line at the National Renewable Energy Laboratory`s photovoltaic test site. This system was deployed to conduct an in-situ technical evaluation of the PV array (in a high voltage configuration) and system performance and reliability in a utility-interconnect application. The system is unique due to the installation of construction-grade insulation on the back of each PV module. This use of insulation is an attempt to levelize the annual array power output by elevating the operating temperature of the modules. This paper presents array and system performance data. Emphasis is placed on quantifying the effects of individual losses as well as seasonal changes on PV array and system performance.

This report describes a project to develop tools for evaluating solar heating and cooling systems. Current work on this project has been to validate the Florida Solar Energy Center`s (FSEC) models of the Solahart 302K and 302K-AS systems to prepare a rating for the Sacramento Municipal Utility District`s rebate program for solar domestic hot water heaters. A preliminary rating has been issued by FSEC and updated ratings will be released as necessary. Two of the problems that were mentioned in the August/September report are addressed and a tank heat loss test is discussed. Work continues on improving and validating the models.

Many computer programs and a variety of models exist for the design of accelerator lattices and the correction of errors. Many physicists contributed to this work by developing codes to suit a variety of machines. At present, we are integrating some of these codes into a unified framework to design and control any type of machine. We will refer to this system of interactive accelerator design, control, and analysis codes as the All-In-One Modeling system (AIM). This paper will explore the utilities of AIM for future accelerator modeling and control. As an example, we will describe a procedure to produce both a linear and a nonlinear model for SPEAR.

None

In the multiple source localization problem, many inverse routines use a rooting of a polynomial to determine the source locations. The authors present a rooting algorithm for locating an unknown number of three-dimensional, near-field, static sources from measurements at an arbitrarily spaced three-dimensional array. Since the sources are near-field and static, the spatial covariance matrix is always rank one, and spatial smoothing approaches are inappropriate due to the spatial diversity. The authors approach the solution through spherical harmonics, essentially replacing the point source function with its Taylor series expansion. They then perform a modified extended Prony analysis of the expansion coefficients to determine the number and location of the sources. The full inverse method is typically ill-conditioned, but a portion of the algorithm is suitable for synthesis analysis. They present a simulation for simplifying point charges limited to a spherical region, using an array of voltage potential measurements made outside the region. Future efforts of this work will focus on adapting the analysis to the electroencephalography and magnetoencephalography.

The results of magnetic circular x-ray dichroism (MCXD) measurements and extended x-ray absorption fine structure measurements (EXAFS) of the Fe K-edges of textured Fe(110)/Pd(111) multilayers are reported. The EXAFS results indicates that the iron in the system goes from bcc to a more densely packed system as the thickness of the iron layer is decreased. The magnetic properties were measured by SQUID magnetometry from 5-350 K. For all the samples, the saturation magnetization was significantly enhanced over the bulk values indicating the interface Pd atoms are polarized by the Fe layer. The enhancement corresponds to a moment of {approx}2.5{mu}{sub B} per interface Pd atom.

To better facilitate working with industry, groups of industrial participants, and partners in alliances or consortia, Sandia National Laboratories presents information helpful to those outside groups as to the forms of arrangements that may be used to better facilitate partnering relationships between Sandia National Laboratories and consortia or alliances of outside parties. It is expected that these alliances and consortia will include both large and small for-profit industrial concerns, as well as not-for-profit entities such as universities, institutes, other research facilities, and other nonprofit institutions or consortia containing institutions. The intent of this report is to provide such outside groups with information that will facilitate rapid interactions with Sandia National Laboratories through some of these forms of business which will be discussed in this report. These are not the only approaches to facilitating business interactions with Sandia National Laboratories and it is not intended that this report be legal advice or required approaches to doing business with Sandia National Laboratories. The intent of this report is merely to suggest ways in which Sandia National Laboratories can work with outside parties in the most expeditious manner.

Allowable volumes of uninhibited water additions to waste tanks are limited to volumes in which hydroxide and nitrite inhibitors reach required concentrations by diffusion from the bulk waste within five days. This diffusion process was modeled conservatively by Fick`s second law of diffusion. The solution to the model was applied to all applicable conditions which exist in the waste tanks. Plant engineers adapted and incorporated the results into a practical working procedure for controlling and monitoring the addition of uninhibited water. Research, technical support, and field engineers worked together to produce an effective solution to a potential waste tank corrosion problem.

Fluorite and perovskite structure cerium oxide based ceramics are a class of materials that may exhibit good oxygen ion and/or protonic conductivity. The authors have successfully deposited thin films of these materials on a variety of substrates. Interesting orientation relationships were noticed between cerium oxide films and strontium titanate bi-crystal substrates. Near lattice site coincidence theory has been used to study these relationships.

Lithium ceramics are one class of materials being considered as tritium breeders for fusion technology,and hydrogen is known to enhance the release of tritium from lithium ceramic materials. Dissociative hydrogen chemisorption on the Li{sub 2}O surfaces of the (100), (110), and (111) planes has been investigated with ab initio Hartree-Fock calculations. Calculations for unrelaxed crystal Li{sub 2}O structures indicated that except for the (100) surface, the (110) and (111) surfaces are stable. Results on the heterolytic sites of n-layer (110) (where n {ge} 2) slabs and three-layer (111) slabs suggest that dissociative hydrogen chemisorption is endothermic. For a one-layer (110) slab at 100% surface coverage, the dissociative hydrogen chemisorption is exothermic, forming OH{sup {minus}} and Li{sup +}H{sup {minus}}Li{sup +}. The results also indicate that the low coordination environment in surface step structures, such as kinks and ledges, may plan an important role in the hydrogen chemisorption process. On the homolytic sites of the (110) and (111) surfaces, there is no hydrogen chemisorption.

The KERNVILLE experiment was executed in Hole U20ar of the Nevada Test Site at 10:10 PST on February 15, 1988, on the Pahute Mesa. All early phenomena observed appeared normal, however, cavity collapse reached the ground surface producing a crater having a mean radius of about 61 m and a maximum depth of about 12 m. No radiation arrivals were detected; the KERNVILLE event containment was considered satisfactory.

This report, prepared by ICF Resources, under a sub-contract with IT Corporation, is concerned chiefly with examining the economic concepts underlying an Incremental Cost Pricing Framework (ICPF), which is defined here as a pricing regime that takes into account several factors: economic efficiency in terms of sending the correct long-term price signals to both users and owners of transmission assets; pricing of individual services in relationship to cost causation; full recovery of costs associated with transmission service; and applicability to real-world power systems without extraordinary administrative burdens. In the course of this examination, the report makes assumptions, as necessary, and assesses the extent to which they may or may not comport with real-world conditions. It also assesses the pros and cons of different approaches to pricing various components of transmission service without making a recommendation as to the superiority of one approach over another from a public policy perspective.

An aerial radiological survey was conducted from November 1-10, 1993, over the Neutron Products Company and neighboring areas. The company, located in Dickerson, Maryland, has two major operations involving the radioisotope cobalt-60 ({sup 60}Co)-the manufacture of commercial {sup 60}Co sources and the sterilization of medical products by exposure to radiation. The sterilization facility consists of two {sup 60}Co sources with activities of approximately 500,000 and 1,500,000 Ci, respectively. The purpose of the aerial survey was to detect and document any anomalous gamma-emitting radionuclides in the environment which may have resulted from operations of the Neutron Products Company. The survey covered two areas: the first was a 6.5- by 6.5-kilometer area centered over the Neutron Products facility; the second area was a 2- by 2.5-kilometer region surrounding a waste pumping station on Muddy Branch in Gaithersburg, Maryland. This site is approximately fifteen kilometers southeast of the Neutron Products facility and was included because sanitary and other liquid waste materials from the plant site are being disposed of at the pumping station. Contour maps showing gamma radiation exposure rates at 1 meter above ground level, overlaid on an aerial photo of the area, were constructed from the data measured during the flights. …

This report serves as a document to describe the role PNL is positioned to take in the Department of Energy`s plans for its national centers in the period 1995-2000. It highlights the strengths of the facilities and personnel present at the laboratory, touches on the accomplishments and projects they have contributed to, and the direction being taken to prepare for the demands to be placed on DOE facilities in the near and far term. It consists of sections titled: director`s statement; laboratory mission and core competencies; laboratory strategic plan; laboratory initiatives; core business areas; critical success factors.

None

None