Report presenting flight tests conducted to evaluate the effect of a thermal ice prevention system on the aerodynamic performance of a C-46 cargo airplane. The installation of the thermal ice-prevention system was found to reduce the indicated airspeed by about 6 miles per hour. Results regarding the overall performance change resulting from the installation of the thermal system, reduction of power attributed to heat-exchanger exhaust-gas back pressure, reduction of power attributed to the internal and external drag of the thermal system, and the additional airplane gross weight attributed to the thermal system are provided.

"Tests were conducted to determine the effect of engine-operating variables and internal coolants on spark-advance requirements of a single cylinder from a 12-cylinder liquid-cooled engine for maximum take-off power and maximum cruise economy. The effects of fuel-air ratio, engine speed, air flow (charge density), mixture temperature, and internal coolants on peak-power (optimum) spark advance were investigated. In addition, tests were conducted to determine the effect of spark advance on the knock-limited engine performance at several mixture temperatures for conditions simulating take-off, high-power cruise, and low-power cruise" (p. 1).

Report discussing an investigation to determine whether the crank angle for maximum rate of pressure rise can be used to indicate maximum-economy spark advance. Information about spark-advance tests at constant inlet-air pressure and fuel-air-ratio test results are provided.

Report discussing the changes in static longitudinal stability due to tilting the propeller axis of an SB2C-3 airplane downward. Tilting the propeller was found to be beneficial for stability, but only if the pilot was in a forward center-of-gravity position with a tilted engine. Installing a tilted engine reduced trim forces due to the changes in power up to 25 percent.

Report presenting performance charts for gliders and twin-engine tow planes with different degrees of aerodynamic and structural refinement. The glider charts display the gliding angle, useful load, stalling speeds, power required for level flight at various speeds, and power required for level flight while climbing at various speeds. The tow-plane charts show the stalling speeds, power required for level flight at various speeds, and power required for level flight while climbing at various speeds.

Report discussing the effects of Mach number on the aerodynamic characteristics of an Allison powered single-engine pursuit airplane. Information about the lift, drag, pitching-moment characteristics, stability, tail effectiveness, and elevator effectiveness with Mach number is provided.

Report discussing a study of automatic nonreturn air valves for use in an intermittent-jet engine. Four valve-spring materials, three valve-grill materials, and five types of valves were used. Valve A, which was made out of aluminum, was found to perform the best and last the longest.

Report discussing a study of the heat-transfer processes in liquid-cooled engines, an equation that has been developed based on the testing, and additional tests on an Allison V-3420-11 engine to determine the accuracy of the equation and the cooling characteristics of the engine. The equation was found to predict heat rejection to a coolant with good accuracy.

Report discussing the results of testing on the suitability of six aromatic amines as fuel additives. Antiknock effectiveness, availability, physical properties, and chemical properties for knock tests were explored. The six aromatic amines were xylidines, cumidines, N-methylxylidines, N-methylcumidines, N-methylaniline, and N-methyltoluidine in 28-R aviation fuel.

"The knock-limited performance of blends containing General Motors triptane in S reference fuel and in an S plus M base fuel was determined in 17.6, F-3, F-4, and full-scale (single cylinder) engines. The results obtained are presented and are compared with published data from similar tests of 12 aromatics, 10 paraffins (including highly purified triptane), and 2 olefins. The comparison of fuels - which is based on a consideration of (a) antiknock blending sensitivity, (b) lead susceptibility, (c) temperature sensitivity, and (d) comparison of small-scale and full-scale engine data - is presented by means of bar graphs" (p. 1).

"An investigation was made of the static longitudinal stability, and control and stall characteristics of XBTK-1 dive bomber. Results indicate that the longitudinal stability will probably be satisfactory for all contemplated flight conditions at the rear-most CG location with elevator both fixed and free. Power effects were small. Sufficient elevator control will be available to trim in any flight condition above the ground" (p. 1).

The data presented have no bearing on performance characteristics of airplane, which were considered exceptionally good in previous tests. Some of the undesirable features of lateral and directional stability and control characteristics of the F-8 are listed. Directional stability, with rudder fixed, did not sufficiently restrict aileron yaw; rudder control was inadequate during take-off and landing, and was insufficient to fly airplane with one engine; in clean condition, power of ailerons was slightly below minimum value specified; it was difficult to trim airplane in rough air.

The results of an investigation of submerged-duct entrances are presented. It is shown that this type of entrance possesses the following characteristics: 1) very high-critical-compressibility speeds throughout the range of high-speed inlet velocity ratios; 2) very low pressure losses for the air entering the duct at all inlet-velocity ratios; and, 3) low external drag. These characteristics are obtained by the proper shaping of the contour of the upstream approach to the submerged inlets and by proper alignment of the duct lip. Design data are presented and the application of these data to a specific high-speed fighter-airplane design is discussed.