Report presenting an investigation in the Langley Unitary Plan wind tunnel to determine the drag and static longitudinal and lateral stability characteristics of a model of the Grumman F11F-1F airplane at Mach numbers 1.56, 1.76, 2.06, and 2.53. The investigation included the effects on performance and stability of modifications, including a wing-root leading-edge fillet and horizontal tails with negative dihedral of 10 degrees and 30 degrees. Information regarding net external minimum drag coefficients, neutral points, directional stability, and positive effective dihedral is provided.

An investigation has been made at Mach numbers of 1.61 and 2.01 and Reynolds numbers from 1.7 X 10 to 7.6 X 10 to determine the pressure distributions over a 60 deg. delta wing having 20 different control configurations. Measurements were made at angles of attack from 0 deg to 15 deg for control deflections from -30 deg to 30 deg. This report presents the complete tabulated pressure data for the range of test conditions.

Memorandum presenting an investigation conducted to determine the feasibility of increasing the tip-section blade-element efficiency of a transonic rotor by reducing the blade loading for a given design inlet relative Mach number. This report primarily discusses the overall and blade-element performances of the modified rotor and compares them with the performance of the original rotor.

From Summary: "Data were obtained with five exhaust-nozzle areas and with the variable-area exhaust nozzle interlinked with the control system at conditions simulating flight at a Mach number of 0.8 and altitudes of 35,00 and 45,000 feet. Data simulating operation at zero flight Mach number at an altitude of 15,000 feet are also included. Engine component performance data are presented in addition to the overall engine performance."

"An investigation has been made at Mach numbers of 1.61 and 2.01 and Reynolds numbers from 1.7 x 10(exp 6) to 7.6 x 10(exp 6) to determine the pressure distributions over a 60 degree delta wing having 20 different control configurations. Measurements were made at angles of attack from 0 to 15 degrees for control deflections from -30 to 30 degrees. This report presents the complete tabulated pressure data for the range of test conditions" (p. 1).

From Introduction: "The general objective of this report is a study of the characteristics of the described form of peak holding control. The control has not yet been used in experimental turbojet-engine study.This study is concerned with only one method of extracting the maximum amount of information from a peak output for the purpose of maintaining that peak. The criteria sought in this control process are: maintenance of peak average output, minimum duration of time in undesirable operation, quickness in response to command to reach peak condition, least amount of excursion in the undesirable region, and type of stability."

Memorandum presenting a modified group method used to calculate the reactivity of the uranyl-fluoride-water experimental critical assemblies which are part of the Oak Ridge critical mass studies. The method relates the experimental slowing-down length for water to that in fluoride solutions and includes the effects of epithermal absorption and fission.

"Internal performance of an XJ79-GE-1 variable ejector was experimentally determined with the primary nozzle in a representative nonafterburning position. Jet-thrust and air-handling data were obtained in quiescent air for 11 selected ejector configurations over a wide range of operation. Additional data, at specific operating conditions, were obtained which indicate the ejector diameter ratio for peak jet-thrust performance. The experimental ejector data are presented in both graphical and tabulated form" (p. 1).

"An investigation has been made in the Langley 4 by 4-foot supersonic pressure tunnel at Mach numbers of 1.82 and 2.01 to determine the longitudinal and lateral static-stability characteristics of a 0.04-scale model of the Lockheed F-104A airplane. The effects of a modified vertical tail, several ventral-fin arrangements, and several external store arrangements were also determined. The tests were made at Reynolds numbers of 1.02 (exp 6) and 1.382 (exp 6), respectively, based on the wing mean geometric chord" (p. 1).