The objective is to develop and test various integrated solar heating, cooling and domestic hot water systems, and to evaluate their performance. Systems composed of new, as well as previously tested, components are carefully integrated so that effects of new components on system performance can be clearly delineated. The SEAL-DOE program includes six tasks which have received funding for the 1991--92 fifteen-month period. These include: (1) a project employing isothermal operation of air and liquid solar space heating systems; (2) a project to build and test several generic solar water heaters; (3) a project that will evaluate advanced solar domestic hot water components and concepts and integrate them into solar domestic hot water systems; (4) a liquid desiccant cooling system development project; (5) a project that will perform system modeling and analysis work on solid desiccant cooling systems research; and (6) a management task. The objectives and progress in each task are described in this report. 6 figs.

This report discusses the following topics on the effect radiation has on thermonuclear reactor materials: Atomic Displacements; Microstructure Evolution; Materials Engineering, Mechanics, and Design; Research on Low-Activation Steels; and Research Motivated by Grant Support.

The objective of proposed research is development of catalysts with enhanced slurry phase activity and better selectivity to fuel range products, through a more detailed understanding and systematic studies of the effects of pretreatment procedures and promoters/binders (silica) on catalyst performance.

In April 1987, Air Products started the third and final contract with the US Department of Energy to develop the Liquid Phase Methanol (LPMEOH) process. One of the objectives was to identify alternative commercial catalyst(s) for the process. This objective was strategically important as we want to demonstrate that the LPMEOH process is flexible and not catalyst selection limited. Among three commercially available catalysts evaluated in the lab, the catalyst with a designation of F21/0E75-43 was the most promising candidate. The initial judging criteria included not only the intrinsic catalyst activity but also the ability to be used effectively in a slurry reactor. The catalyst was then advanced for a 40-day life test in a laboratory 300 cc autoclave. The life test result also revealed superior stability when compared with that of a standard catalyst. Consequently, the new catalyst was recommended for demonstration in the Process Development Unit (PDU) at LaPorte, Texas. This report details the methodology of testing and selecting the catalyst.

The LPMEOH process was conceived and patented by Chem Systems Inc. in 1975. Initial research and studies on the process focused on two distinct modes of operation. The first was a liquid fluidized mode with relatively large catalyst pellets suspended in a fluidizing liquid, and the second was an entrained (slurry) mode with fine catalyst particles slurried in an inert liquid. The development of both operating modes progressed in parallel from bench scale reactors, through an intermediate scale lab PDU, and then to the LaPorte PDU in 1984. The slurry mode of operation was ultimately chosen as the operating mode of choice due to its superior performance.

Significant progress was made in the May 1990--May 1991 contract period in three primary coal liquefaction research areas: catalysis, structure-reactivity studies, and novel liquefaction processes. A brief summary of the accomplishments in the past year in each of these areas is given.

A report on Ron Ruggless' 6000 Junius St. commercial property that includes the estimated value and tax information.

Report on a property on Junius Street.

Nitric acid is used to clean depleted uranium in the form of cast billets, and cast and wrought parts in the processing cycle and is the largest contributor of waste to the West End Treatment Facility (WETF). An estimated 27,000 gallons of liquid and 75 to 95% of all uranium received was sent to the WETF for processing from this facility in our baseline year. Because wrought parts account for the largest throughput at the nitric acid facility, an alternative cleaning method for these parts was examined first. Test results on the first part type from the wrought family showed ultrasonic cleaning to be an effective cleaning method. Since the geometry for this part presented the most difficulty in terms of ultrasonic cleaning, the entire wrought family is expected to be moved from the nitric acid facility to the ultrasonic cleaning facility. As a result, there will be an 83% reduction part throughput at the nitric acid facility which corresponds to a significant decrease in wastes sent to the WETF and a reduction in the generation and associated costs of waste overall. This change also eliminated two building moves involving two RAD areas resulting in a part movement reduction of …

The objectives of this work are to elucidate the molecular mechanisms that are responsible for radiation-induced DNA damage. The overall goal is to understand the relationship between the chemical and structural changes produced by ionizing radiation in DNA and the resulting impairment of biological function expressed as carcinogenesis or cell death. The studies are based on theoretical explorations of possible mechanisms that link initial radiation damage in the form of base and sugar damage to conformational changes in DNA. These mechanistic explorations should lead to the formulation of testable hypothesis regarding the processes of impairment of regulation of gene expression, alternation in DNA repair, and damage to DNA structure involved in cell death or cancer.

The effective starting date of this grant was May 15. In the first three months of this project we focused primarily on organizational and technical aspects of our research which included: organization of the database of repeats in primates; preparation of software for rapid and sensitive search of novel repetitive elements in GenBank; purchase and installation of the Sun workstation; and research on the mammal-specific MAR1 family of repetitive elements (to be communicated in October).

Advanced Sciences, Incorporated (ASI), has been performing a Remedial Investigation and Feasibility Study (RI/FS) at the Feed Materials Production Center (Fernald Facility) at Fernald, Ohio, under an 8 (a) contract with the US Small Business Administration (SBA). The Fernald Facility is a Government-owned facility operated by Westinghouse Materials Company of Ohio (WMCO) under a management and operating contract. The objective of this audit was to evaluate the award and administration of the ASI contract.

The binary zirconium-tin system was reinvestigated. The A15 phase appears to be a line phase with a Zr{sub 4}Sn composition. The Zr{sub 5}Sn{sub 3} (Mn{sub 5}Si{sub 3}-type) and Zr{sub 5}Sn{sub 4} (Ti{sub 5}Ga{sub 4}-type) compounds are line phases below 1000{degree}C, the latter being a self-interstitial phase of the former. ZrSn{sub 2} is the tin-richest phase. There is an one-phase region between these phases with partial self-interstitials at high temperatures. The zirconium-lead system behaves similarly: there are an A15 phase with a Zr{sub {approximately}5.8}Pb composition, Zr{sub 5}Pb{sub 3} (Mn{sub 5}Si{sub 3}-type) and Zr{sub 5}Pb{sub 4} (Ti{sub 5}Ga{sub 4-type}) compounds, and a high temperature solid solution between Zr{sub 5}Pb{sub >3.5} and Zr{sub 5}Pb{sub 4} from below 1000{degree}C; however, the ZrSn{sub 2} analogue is not formed. The Mn{sub 5}Si{sub 3}-type phases in these systems can accommodate third elements interstitially to form stoichiometric compounds Zr{sub 5}Sn{sub 3}Z (Z = B, C, N, O, Al, Si, P, S, Cu, Zn, Ga, Ge, and As and Se) and Zr{sub 5}Pb{sub 3}Z (Z = Al, Si, P, S, Fe, Co, Ni, Cu, Zn, Ga, Ge, As, Se, Ag, Cd, In, Sn, Sb and Te) as well as their self-interstitial derivatives. The systems Zr-Sn-T, T = Fe, Co …

Comprehensive understanding of chemical transport in response to fluid flow and diffusion in geologic processes requires thermodynamic and transport properties of a wide variety of aqueous species at the temperature and pressure of interest, as well as mass transfer computer codes that provide simultaneously for fluid flow, diffusion, dispersion, homogeneous chemical reactions, and mineral solubilities. As a result of research carried out with support from DOE in prior years of this grant, considerable progress has been made in developing computer codes to calculate advective-dispersive-diffusional transport at both high and low pressures and temperatures. These codes have become highly sophisticated, but their application to geochemical processes is limited by the availability of thermodynamic and transport data for the major solute species in the aqueous phase. Over the past three years, research has been directed primarily toward characterizing the thermodynamic behavior of concentrated supercritical aqueous electrolyte solutions and predicting the diffusion coefficients of organic species in oil field brines. Related research has been concerned with characterizing the growth rate of hydrothermal alteration zones and assessing the relative importance of aqueous diffusion and heterogeneous reactions at mineral surfaces in geochemical processes. 103 refs., 12 figs.

The LPMEOH process was conceived and patented by Chem Systems Inc. in 1975. Initial research and studies on the process focused on two distinct modes of operation. The first was a liquid fluidized mode with relatively large catalyst pellets suspended in a fluidizing liquid, and the second was an entrained (slurry) mode with fine catalyst particles slurried in an inert liquid. The development of both operating modes progressed in parallel from bench scale reactors, through an intermediate scale lab PDU, and then to the LaPorte PDU in 1984. The slurry mode of operation was ultimately chosen as the operating mode of choice due to its superior performance.

The objective of proposed research is development of catalysts with enhanced slurry phase activity and better selectivity to fuel range products, through a more detailed understanding and systematic studies of the effects of pretreatment procedures and promoters/binders (silica) on catalyst performance.

This memo presents an analytical development for prediction of skew harmonics in a iron core C-magnet to due arbitrarily positioned electromagnet coils. A structured approach is presented for the suppression of an arbitrary number of harmonic components to arbitrarily low values. Application of the analytical harmonic strength calculations coupled to the structured harmonic suppression approach is presented in the context of the design of the ALS storage ring corrector magnets.

This memo presents an analytical development for prediction of skew harmonics in a iron core C-magnet to due arbitrarily positioned electromagnet coils. A structured approach is presented for the suppression of an arbitrary number of harmonic components to arbitrarily low values. Application of the analytical harmonic strength calculations coupled to the structured harmonic suppression approach is presented in the context of the design of the ALS storage ring corrector magnets.

In April 1987, Air Products started the third and final contract with the US Department of Energy to develop the Liquid Phase Methanol (LPMEOH) process. One of the objectives was to identify alternative commercial catalyst(s) for the process. This objective was strategically important as we want to demonstrate that the LPMEOH process is flexible and not catalyst selection limited. Among three commercially available catalysts evaluated in the lab, the catalyst with a designation of F21/0E75-43 was the most promising candidate. The initial judging criteria included not only the intrinsic catalyst activity but also the ability to be used effectively in a slurry reactor. The catalyst was then advanced for a 40-day life test in a laboratory 300 cc autoclave. The life test result also revealed superior stability when compared with that of a standard catalyst. Consequently, the new catalyst was recommended for demonstration in the Process Development Unit (PDU) at LaPorte, Texas. This report details the methodology of testing and selecting the catalyst.

New waste tanks are to be constructed in H-area to store hazardous low level wastes. AISI Type 304L (304L) stainless steel was recommended as a suitable material of construction for these tanks. Cyclic polarization and coupon tests were performed to evaluate the corrosion resistance of 304L over a wide range of waste tank environments. The results of both tests indicated that 304L was not susceptible to attack under any of these conditions. Comparison tests were also performed with ASTM A537 carbon steel (A537) and Incoloy 825. The carbon steel corroded severely in some of the environments, while Incoloy 825 did not corrode. These tests, along with those for 304L, verified the correlation between cyclic polarization and coupon tests. Electrochemical Impedance Spectroscopy (EIS) was performed to monitor the breakdown of the protective oxide film on the surface of the material as a function of time and temperature. These results also correlated with those from the cyclic polarization and coupon tests.

The effective starting date of this grant was May 15. In the first three months of this project we focused primarily on organizational and technical aspects of our research which included: organization of the database of repeats in primates; preparation of software for rapid and sensitive search of novel repetitive elements in GenBank; purchase and installation of the Sun workstation; and research on the mammal-specific MAR1 family of repetitive elements (to be communicated in October).

The objectives of this work are to elucidate the molecular mechanisms that are responsible for radiation-induced DNA damage. The overall goal is to understand the relationship between the chemical and structural changes produced by ionizing radiation in DNA and the resulting impairment of biological function expressed as carcinogenesis or cell death. The studies are based on theoretical explorations of possible mechanisms that link initial radiation damage in the form of base and sugar damage to conformational changes in DNA. These mechanistic explorations should lead to the formulation of testable hypothesis regarding the processes of impairment of regulation of gene expression, alternation in DNA repair, and damage to DNA structure involved in cell death or cancer.

None

None