Abstract: "The results of the investigation of three methods of obtaining transverse stability in linear accelerators for ions are presented and discussed. For electric or magnetic quadrupole focusing the range of stable operation, oscillation amplitudes, and the operation of an actual grid is analyzed from measurements of the field distribution. Finally, the formulas applicable to focusing by axial magnetic lenses are presented."

None

Thesis discussing the study of deuterons produced at wide angles to a beam of 300 Mev neutrons and a beam of 300 Mev protons. It was observed that the deuterons are formed by "a two step process in which the incident nucleon, or its collision partner, is scattered and then picks up in the same nucleus." Some tritons are also observed, and it is thought that they are formed by the same process as the deuterons. From these findings, the author concludes that "for heavy nuclei, there is a nuclear skin rich in neutrons."

This document presents a summary of work and progress at the Hanford Engineer Works for October 1954. The report is divided into sections by department. A plant wide general summary is included at the beginning of the report, after which the departmental summaries begin. The Manufacturing Department reports plant statistics, and summaries for the Metal Preparation, Reactor and Separation sections. The Engineering Department`s section summarizes work for the Technical, Design, and Project Sections. Costs for the various departments are presented in the Financial Department`s summary. The Medical, Radiological Sciences, Utilities and General Services, Employee and Public Relations, and Community Real Estate and Services departments have sections presenting their monthly statistics, work, progress, and summaries.

None

Herman Lurie's weekly report for the sugar market. Details include tons of sugar, prices, distribution, and sellers.

Abstract: "A simple detector for determining the presence of UF6 in a stream of HF, UF4, and dissociated NH3 is described. The basic detection element is a sensitized piece of carbon rod. The unit has proved satisfactory on production equipment."

Report presenting an investigation to determine the damping-in-pitch characteristics of four rocket-powered wing-body combinations for a range of Mach numbers from 0.85 to 1.30. The models were tested at the same center-of-gravity location and had identical bodies. Information about the trim, lift, static longitudinal stability, dynamic longitudinal stability, and drag is provided.

Report presenting an investigation of the possibility of utilizing the relatively good characteristics of the spike-type diffuser in the supersonic compressor. Results regarding the overall performance, inlet conditions, outlet conditions, entrance flow conditions, and estimated performance of subsonic portion of rotor passage are provided.

Report of an investigation using three rocket-propelled delta-wing-body combinations for a range of Mach numbers to determine the damping-in-pitch characteristics. All models were statically stable but dynamically unstable at transonic speeds. Information about trim, lift, and drag is also provided.

Report presenting an investigation to determine the effect of ground on the low-speed aerodynamic, control, and control hinge-moment characteristics of a 3-percent-thick, delta-wing-fuselage configuration. Aerodynamic forces and moments and hinge-moment data were obtained for a range of angles of attack, ground heights, and a designated Mach and Reynolds number.

From Summary: "Sound pressure levels, frequency spectrum, and jet velocity profiles are presented for an engine-afterburner combination at various values of afterburner fuel - air ratio. At the high fuel-air ratios, severe low-frequency resonance was encountered which represented more than half the total energy in the sound spectrum. At similar thrust conditions, lower sound pressure levels were obtained from a current fighter air craft with a different afterburner configuration. The lower sound pressure levels are attributed to resonance-free afterburner operation and thereby indicate the importance of acoustic considerations in afterburner design."

Report presenting an investigation in the supersonic tunnel using a canard missile configuration designated as NACA RM-4. Measurements of lift, drag, and pitching moment were made over a range of Mach numbers and angles of attack. The data is presented without analysis.

Report presenting an investigation in the transonic tunnel to determine the basic aerodynamic and loading characteristics of an unswept-wing-fuselage combination with a wing of aspect ratio 4, taper ratio 0.5, and NACA 65A004 airfoil sections. Force, moment, and pressure measurements were obtained for a range of Mach numbers and angles of attack.

Report presenting an investigation in the high-speed tunnel to determine the hinge-moment, lift, and pitching-moment characteristics of a 4-percent-thick 60 degree delta wing with a trailing-edge flap-type control. The purpose of this investigation is to determine the ideal aerodynamic balance of a large part of the control force in order to make aircraft easier to control in the event of power failure.

Report presenting a series of flight tests to determine the flying qualities of a man standing on a platform supported by a teetering rotor. The machine was tested with a free-teetering rotor, a spring-restrained rotor, and a rotor and foot platform isolated from the framework by rubber connections. Results of the different configurations during indoor and outdoor flights are presented.

Report presenting measurements of longitudinal stability and drag characteristics of a fin-stabilized body of revolution with a fineness ratio 12 at low angles of attack using the free-fall method. Information about the data obtained from testing as well as the experimental coefficients related to body normal-force, total longitudinal-force, and body moment with Mach number is provided.

Report presenting flight measurements of the buffeting characteristics of the Bell X-5 airplane at 58.7 degrees of sweepback at a range of Mach numbers and altitudes. Information about tail buffeting and wing buffeting at several angles of attack is provided. The pilot considered the buffeting to be unobjectionable throughout the entire test region.

Report presenting a low-speed investigation of the aerodynamic and control characteristics of a 3-percent-thick, 60 degree delta-wing-fuselage configuration in the full-scale tunnel to obtain data at large scale on control configurations of general interest and to determine whether significant Reynolds number effects existed for a very thin wing subject to leading-edge vortex-type flow. Aerodynamic forces, moments, and hinge moments were obtained for several types of controls and flap deflections.

Report presenting the results of an experimental investigation of a transonic turbine designed for a diffusion parameter of 0.30. The experimental performance of the turbine is compared with the experimental performance obtained for another transonic turbine designed for a diffusion parameter of 0.15. Results regarding the overall performance, survey investigation, and loss patterns are provided.

From Introduction: "This paper presents the results of an investigation conducted in the Langley 11-inch hypersonic tunnel to evaluate methods of increasing maximum lift-drag ratio."

Report presenting sound pressure levels, frequency spectrum, and jet velocity profiles for an engine-afterburner combination at various values of afterburner fuel-air ratio. Lower sound pressure levels were obtained from a current fighter aircraft with a different afterburner configuration. Results regarding the jet temperature, jet Mach number and velocity, and sound measurements are provided.

Report presenting a determination of aerodynamic lift and moment flutter derivatives at high subsonic speeds for a series of two-dimensional airfoils varying in thickness and thickness distribution. An evaluation of the results indicated that wing profile and angle of attack have major effects on flutter derivatives at speeds exceeding the Mach number for steady-state lift divergence. Results regarding lift and moment are provided.

Report presenting an investigation in the high-speed tunnel at high subsonic speeds and several angles of attack of the chordwise pressure distributions in sideslip at six span stations on a 45 degree sweptback, untapered, vertical tail with a 45 degree sweptback horizontal tail mounted at 50-percent and 100-percent vertical-tail span.