This technical memorandum was prepared to: (1) describe a typical basalt radionuclide repository site, (2) describe geologic and hydrologic processes associated with regional radionuclide transport in basalts, (3) define the parameters required to model regional radionuclide transport from a basalt repository site, and (4) develop a ''conceptual model'' of radionuclide transport from a basalt repository site. In a general hydrological sense, basalts may be described as layered sequences of aquifers and aquitards. The Columbia River Basalt, centered near the semi-arid Pasco Basin, is considered by many to be typical basalt repository host rock. Detailed description of the flow system including flow velocities with high-low hydraulic conductivity sequences are not possible with existing data. However, according to theory, waste-transport routes are ultimately towards the Columbia River and the lengths of flow paths from the repository to the biosphere may be relatively short. There are many physical, chemical, thermal, and nuclear processes with associated parameters that together determine the possible pattern of radionuclide migration in basalts and surrounding formations. Brief process descriptions and associated parameter lists are provided. Emphasis has been placed on the use of the distribution coefficient in simulating ion exchange. The use of the distribution coefficient approach is limited …

This operator's manual for the DART II Data Acquisition, Reduction, and Transmission system is divided into the following sections: system capabilities and configuration; ways in which the microprocessor-based central processing unit communicates with the memory and peripheral devices; theory of operation for the system components; and a section of reference data including schematic diagrams, cable lists, device specification sheets and other detailed information. (GHT)

Activities initiated after the start of the revegetation project on Alaskan coal mine spoils on September 1, 1979 have consisted mainly of some fall plantings (dormant seedings) and soil and coal spoil samplings and analyses. Because of the late summer start for the project, only a limited amount of field work could be initiated in plant material studies. This consisted of a fall planting at the Usibelli mine site at Healy in interior Alaska. The planting was intended to test the efficacy of seeding in the frost period following the growing season, requiring the seed to remain dormant over winter and to germinate when conditions become favorable in late spring. It also was intended as a comparison of a number of different grasses. Thirty entries were seeded in three replications. Fifteen species of grasses and a clover were included in the trial. The site provided for the trial was on overburden material along a streambed. Among the entries were eight cultivars of introduced grasses, five cultivars of native Alaskan germplasm, one introduced clover cultivar, and sixteen experimental grasses mainly of Alaskan origin.

A Monte Carlo IBM-7090 program (OGRE-P1) was written for calculation of the dose rate on one side of a slab owing to an isotropic, cosine, or collimated monoenergetic gamma radiation source on the other side of the slab. A maximum of 50 homogeneous regions are permitted. (auth)

The DART II is a data acquisition system that can be used with air pollution monitoring equipment. This volume contains appendices that deal with the following topics: adjustment and calibration procedures (power supply adjustment procedure, ADC calibration procedure, analog multiplexer calibration procedure); mother board signature list; schematic diagrams; device specification sheets (microprocessor, asynchronous receiver/transmitter, analog-to-digital converter, arithmetic processing unit, 5-volt power supply, +- 15-volt power supply, 24-volt power supply, floppy disk formater/controller, random access static memory); ROM program listing; 6800 microprocessor instruction set, octal listing; and cable lists. (RR)

Annual Illness and Injury Surveillance Program report for 2003 for Sandia National Laboratories-Albuquerque. The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of epidemiologic surveillance activities that provide an early warning system for health problems among workers. The IISP monitors illnesses and health conditions that result in an absence of workdays, occupational injuries and illnesses, and disabilities and deaths among current workers.

Annual Illness and Injury Surveillance Program report for 2003 for ORNL. The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of epidemiologic surveillance activities that provide an early warning system for health problems among workers. The Illness and Injury Surveillance Program monitors illnesses and health conditions that result in an absence of workdays, occupational injuries and illnesses, and disabilities and deaths among current workers.

The closure process for high level waste tanks at the Savannah River Site will require dissolution of the crystallized salts that are currently stored in many of the tanks. The insoluble residue from salt dissolution is planned to be removed by an Enhanced Chemical Cleaning (ECC) process. Development of a chemical cleaning process requires an insoluble salt simulant to support evaluation tests of different cleaning methods. The Process Science and Engineering section of SRNL has been asked to develop an insoluble salt simulant for use in testing potential ECC processes (HLE-TTR-2007-017). An insoluble salt simulant has been developed based upon the residues from salt dissolution of saltcake core samples from Tank 28F. The simulant was developed for use in testing SRS waste tank chemical cleaning methods. Based on the results of the simulant development process, the following observations were developed: (1) A composition based on the presence of 10.35 grams oxalate and 4.68 grams carbonate per 100 grams solids produces a sufficiently insoluble solids simulant. (2) Aluminum observed in the solids remaining from actual waste salt dissolution tests is probably precipitated from sodium aluminate due to the low hydroxide content of the saltcake. (3) In-situ generation of aluminum hydroxide (by …

Annual Illness and Injury Surveillance Program report for 2003 for the Nevada Test Site. The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of epidemiologic surveillance activities that provide an early warning system for health problems among workers. The Illness and Injury Surveillance Program monitors illnesses and health conditions that result in an absence of workdays, occupational injuries and illnesses, and disabilities and deaths among current workers.

The major objectives of the proposed study are to 1) determine the leaching characteristics of Cr(VI) from contaminated sediments collected from 100 area spill sites, 2) elucidate possible Cr(VI) mineral and/or chemical associations that may be responsible for Cr(VI) retention in the Hanford site 100 areas through the use of i) macroscopic solubility studies and ii) microscale characterization of contaminated sediments, and 3) from these data construct a conceptual model of Cr(VI) geochemistry in the Hanford 100 area vadose zone. These objectives are based on locating and obtaining contaminated sediment with depth and at varying Cr(VI) concentrations as we hypothesize that mineral/chemical-Cr(VI) associations should be related to the total Cr concentration and other master geochemical variables (e.g., pH, counter-cation type and concentration, and water content). In addressing these objectives, additional benefits accrued will be (1) a fuller understanding of Cr(VI) entrained in the vadose zone that will that can be utilized in modeling potential Cr(VI) source terms, and 2) accelerating the Columbia River 100 area corridor cleanup by developing remedial action based on a fundamental understanding of Cr(VI) vadose zone geochemistry.

Annual Illness and Injury Surveillance Program report for 2003 for the East Tennessee Technology Park (K-25).The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of epidemiologic surveillance activities that provide an early warning system for health problems among workers. The Illness and Injury Surveillance Program monitors illnesses and health conditions that result in an absence of workdays, occupational injuries and illnesses, and disabilities and deaths among current workers.

Annual Illness and Injury Surveillance Program report for 2003 for Y-12. The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of epidemiologic surveillance activities that provide an early warning system for health problems among workers. The IISP monitors illnesses and health conditions that result in an absence of workdays, occupational injuries and illnesses, and disabilities and deaths among current workers.

Table 1 summarizes the number of jobs associated with the development and operation of a 50 MW geothermal dual flash power system. The values shown are person years (PY) of employment for the 50 MW system. About 1500 person years (PY) of labor are incorporated in the manufacture and installation of capital components of the system. Of these, about 300 PY are local to the area of the geothermal system, and about 1200 are dispersed elsewhere in the U.S. or other countries. About 71 PY of labor per year are required for the operation of the system. Of those, about 39 PY are local to the plant, and about 32 are dispersed. The total person years of labor over the entire life cycle of such a system, assuming a 30-year operational life, is on the order of 3630 person years. These include jobs during the 5 to 10 years of exploration and construction activities prior to plant start up. Of these jobs, about 1470 PY are local to the system, and about 21 60 are dispersed elsewhere.

This Sampling and Analysis Plan (SAP) has been prepared to fulfill requirements of Module VII, Section VII.M.2 and Table VII.1, requirement 4 of the Waste Isolation Pilot Plant (WIPP) Hazardous Waste Permit, NM4890139088-TSDF (the Permit); (NMED [New Mexico Environment Department], 1999a). This SAP describes the approach for investigation of the Solid Waste Management Units (SWMU) and Areas of Concern (AOC) specified in the Permit. This SAP addresses the current Permit requirements for a RCRA Facility Investigation(RFI) investigation of SWMUs and AOCs. It uses the results of previous investigations performed at WIPP and expands the investigations as required by the Permit. As an alternative to the RFI specified in Module VII of the Permit, current NMED guidance identifies an Accelerated Corrective Action Approach (ACAA) that may be used for any SWMU or AOC (NMED, 1998). This accelerated approach is used to replace the standard RFI work plan and report sequence with a more flexible decision-making approach. The ACAA process allows a facility to exit the schedule of compliance contained in the facility's Hazardous and Solid Waste Amendments (HSWA) permit module and proceed on an accelerated time frame. Thus, the ACAA process can beentered either before or after a RFI work plan. …

Annual Illness and Injury Surveillance Program report for 2003 for Idaho National Lab. The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of epidemiologic surveillance activities that provide an early warning system for health problems among workers. The Illness and Injury Surveillance Program monitors illnesses and health conditions that result in an absence of workdays, occupational injuries and illnesses, and disabilities and deaths among current workers.

Annual Illness and Injury Surveillance Program report for 2003 for Lawrence Livermore National Lab. The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of epidemiologic surveillance activities that provide an early warning system for health problems among workers. The IISP monitors illnesses and health conditions that result in an absence of workdays, occupational injuries and illnesses, and disabilities and deaths among current workers.

The Tank Closure and Technology Development Groups are developing a strategy for closing the High Level Waste (HLW) tanks at the Savannah River Site (SRS). Two Type IV tanks, 17 and 20 in the F-Area Tank Farm, have been successfully filled with grout. Type IV tanks at SRS do not contain cooling coils; on the other hand, the majority of the tanks (Type I, II, III and IIIA) do contain cooling coils. The current concept for closing tanks equipped with cooling coils is to pump grout into the cooling coils to prevent pathways for infiltrating water after tank closure. This task addresses the use of grout to fill intact cooling coils present in most of the remaining HLW tanks on Site. The overall task was divided into two phases. Phase 1 focused on the development of a grout formulation (mix design) suitable for filling the HLW tank cooling coils. Phase 2 will be a large-scale demonstration of the filling of simulated cooling coils under field conditions using the cooling coil grout mix design recommended from Phase 1. This report summarizes the results of Phase 1, the development of the cooling coil grout formulation. A grout formulation is recommended for the …

Recently a T = 1 resonance in the {Lambda}-{pi} system called Y{sub 1} has been observed with a mass of 1385 MeV. Two types of resonances have been predicted that might relate this observation to other elementary-particle interactions: (1) P 3/2 resonances in the {Lambda}-{pi} and {Sigma}-{pi} systems predicted by global symmetry, corresponding to the (3,2/ 3/2) resonance of the {pi}-N system, (2) a spin-1/2 Y-{pi} resonance resulting from a bound state in the {bar K}-N system. The position and the width of the observed Y{sub 1} resonance agree with both theories, but since the spin and parity have not yet been determined, they cannot distinguish between the two theoretical interpretations.

During isothermal multicomponent diffusion, interdiffusion fluxes of individual components can go to zero at zero-flux planes (ZFP) and exhibit flux reversals from one side to the other of such planes. Interdiffusion fluxes as well as the locations and compositions of ZFPs for components are determined directly from the concentration profiles of diffusion couples without the need for prior knowledge of interdiffusion coefficients. The development and identification of ZFPs is reviewed with the aid of single phase and two-phase diffusion couples investigated in the Cu-Ni-Zn system at 775/sup 0/C. ZFP locations in the diffusion zone nearly correspond to sections where the activity of a component is the same as its activity in either of the terminal alloys of a couple. Path slopes at ZFPs are uniquely dictated by the atomic mobility and thermodynamic data for the components. Discontinuous flux reversals for the components can also occur at interfaces in multiphase couples. Identification of ZFPs is also presented for diffusion in the Cu-Ni-Zn-Mn quaternary system. Analytical representation of diffusion paths for both ternary and quaternary diffusion couples is presented with the aid of characteristic path parameters.

Two distinct clusters of microearthquakes have been identified at The Geysers, possibly relating to two independent pressure sinks resulting from steam production described by Lipman, and others (1977). Unlike earthquakes in the Maacama-Rodgers Creek fault zone to the south and west, earthquakes at The Geysers are confined to depths of less than 5 km. The present level of seismicity at The Geysers appears to be higher than the preproduction level and is higher and more continuous than the seismicity in the surrounding region. Earthquakes in the steam production zone at The Geysers resemble earthquakes in the surrounding region with regard to focal plane solutions, source characteristics and magnitude distribution (b slope). Subtle differences in earthquake characteristics may be resolved by analysis of more extensive data now being gathered in the region.

Both the Model 5A (Monel 400) and 5A (Monel 400) Modified five-inch cylinders have been used at the Portsmouth GDP to withdraw, store, and ship highly enriched uranium hexafluoride. As a result of a generic cracking problem with Monel 400 valve-boss material, a cylinder modification was implemented in the mid 1970s. This modification resulted in the violation of the ASME ''Code'' stamp status of the Model 5A Modified cylinder. Hydrostatic testing-to- rupture data indicated that the Model 5A Modified cylinders had ruptured strengths equivalent to that of the original Model 5A cylinders. An independent consultant reviewed the available information and confirmed that the Model 5A Modified cylinders ''will with proper maintenance continue to perform satisfactorily for many additional years of service.'' Based on the test data and consultant's review, DOE approved continued use of the 5A Modified cylinder and also requested procurement of replacement 5B cylinders be expedited. Currently, the 5A modified cylinders are in the production, storage, shipment cycle, and a sufficient number of 5B cylinders has been ordered to accommodate the projected product shipping requirements for the Navy flow. 3 tabs.

Secondary emission is not likely to be suppressed in thin films. Accumulated charges leak away with two time constants. The fast time constant should be short compared to the pulse duration, and the slow time constant should be short compared to the time between pulses. The Joule heating may be prohibitive in reaching adequate charge removal. The joule heating may be reduced by films which conduct little in the direction of the electric field and much better in the perpendicular direction.

MAGIC, a new one-dimensional particle code, simulates magneto-inductive phenomena in a cylindrically symmetric magnetized plasma. The physical model and the computational algorithm used for the code are described. A user's guide to and a listing of MAGIC are also included.

In order to construct a D-T fusion-fission hybrid breeder reactor there must be some guarantee that tritium will be available to fuel the fusion reaction. This can be achieved by breeding tritium in the blanket of the reactor. A variety of blanket configurations have been studied with the intent of arriving at a blanket design capable of attaining sizeable values of power and fissile fuel production, and simultaneously assure self-sufficiency in tritium production for the reactor, i.e., a T-breeding ratio greater than 1.0. Using a four group diffusion theory code, a number of possible blanket configurations were studied during the parametric phase of hybrid breeder blanket design. They included tritium breeding zones of natural or enriched lithium metal and natural lithium in dilithium oxide, neutron multiplier zones of uranium and thorium with varying amounts of plutonium, thorium fissile breeding zones (sometimes containing plutonium), and graphite reflector zones. The choice of clad used in the fuel rods has also been found to influence tritium breeding. One of the more promising designs studied combines a tritium breeding ratio of 1.2 with a blanket fissile power of 16 GW(th), and a U-233 production rate of 2.7 tonnes per year.