Recent experimental investigations indicate that the repair welding of irradiated materials containing greater than 1 to 2.5 appm helium leads to catastrophic cracking in the heat affected zone of the weld. The high temperatures and cooling tensile stresses which occur during the welding process lead to enhanced helium bubble growth in the heat affected zone region, resulting in catastrophic cracking upon cooling. An investigation is proposed which seeks to determine the effect of stress state on the helium bubble growth process and develop engineering modifications to the welding process based upon this understanding in an attempt to alleviate or eliminate the weld cracking problem in type 316 stainless steel materials.

The internal dosimetry program at the Savannah River Site (SRS) consists of radiation protection programs and activities used to detect and evaluate intakes of radioactive material by radiation workers. Examples of such programs are: air monitoring; surface contamination monitoring; personal contamination surveys; radiobioassay; and dose assessment. The objectives of the internal dosimetry program are to demonstrate that the workplace is under control and that workers are not being exposed to radioactive material, and to detect and assess inadvertent intakes in the workplace. The Savannah River Site Internal Dosimetry Technical Basis Manual (TBM) is intended to provide a technical and philosophical discussion of the radiobioassay and dose assessment aspects of the internal dosimetry program. Detailed information on air, surface, and personal contamination surveillance programs is not given in this manual except for how these programs interface with routine and special bioassay programs.

The code RELAX is designed to calculate atomic relaxation spectra of X-rays and electrons due to bound-bound transitions. This calculation is based on the atomic transition data contained in the Livermore Evaluated Atomic Data Library (EADL). The results produced by this code for fluorescence yield vs. atomic number (Z) have been published in Tables and Graphs of Atomic Subshell and Relaxation Data Derived from the LLNL Evaluated Atomic Data Library (EADL), z = 1--100{double prime}, UCRL-50400, Vol. 30, October 31, 1991, Lawrence Livermore National Laboratory.

The Knowledges and Abilities Catalog for Nuclear Power Plant Operations: Savannah River Site (SRS) Production Reactors, provides the basis for the development of content-valid certification examinations for Senior Reactor Operators (SROs) and Central Control Room Supervisors (SUP). The position of Shift Technical Engineer (STE) has been included in the catalog for completeness. This new SRS reactor operating shift crew position is held by an individual holding a CCR Supervisor Certification who has received special engineering and technical training. Also, the STE has a Bachelor of Science degree in engineering or a related technical field. The SRS catalog contains approximately 2500 knowledge and ability (K/A) statements for SROs and SUPs at heavy water moderated production reactors. Each K/A statement has been rated for its importance to the safe operation of the plant in a manner ensuring the health and safety of the public. The SRS K/A catalog is presently organized into five major sections: Plant Systems grouped by Safety Function, Plant Wide Generic K/As, Emergency Plant Evolutions, Theory and Components (to be developed).

The purpose of this study was to characterize typical levels and variability of 60Hz magnetic fields at the centerline and edge of right-of-way of Bonneville Power Administration (BPA) 230-kV and 500-kV transmission lines. This was accomplished by taking magnetic field measurements at over 800 spans in Oregon and Washington. The spans were sampled using a stratified random sampling procedure with region (East vs. West), voltage (230-kV vs 500-kV), and circuit configuration as strata. There were five different circuit configuration groups for each region/voltage category requiring a total of 200 strata. Magnetic field measurements were taken at 13 locations under each span using an EMDEX-C as a survey meter. Additional information recorded for each span included conductor height (at 10 locations), right-of-way width, longitudinal and lateral slope, time of day, vegetation, terrain, weather conditions, temperature, wind speed, span length and presence of other lines in the corridor. 9 refs., 17 figs., 26 tabs.

The objective of this research is to elucidate the role of various chemical additives on ethanol synthesis over Rh- and Ni-based catalysts. Chemical additives used for this study will include S, P, Ag, Cu, Mn, and Na which have different electronegativities. The effect of additives on the surface state of the catalysts, heat of adsorption of reactant molecules, reaction intermediates, reaction pathways, reaction kinetics, and product distributions is/will be investigated by a series of experimental studies of NO adsorption, reaction probing, study state rate measurement, and transient kinetic study. A better understanding of the role of additives on the synthesis reaction may allow us to use chemical additives to manipulate the catalytic properties of Rh- and Ni-based catalysts for producing high yields of ethanol from syngas. 27 refs. 7 figs., 2 tabs.

This project is designed to develop methods for pre-combustion coal remediation by implementing recent advances in enzyme biochemistry. The novel approach of this study is incorporation of hydrophilic oxidative enzymes in reverse micelles in an organic solvent. Enzymes from commercial sources or microbial extracts are being investigated for their capacity to remove organic sulfur from coal by oxidation of the sulfur groups, splitting of C-S bonds and loss of sulfur as sulfuric acid Dibenzothiophene (DBT) and ehtylphenylsulfide (EPS)are serving as serving as models of organic sulfur-containing components of coal in initial studies.

The objective of this research is to elucidate the role of various chemical additives on ethanol synthesis over Rh- and Ni-based catalysts. Chemical additives used for this study will include S, P, Ag, Cu, Mn, and Na which have different electronegativities. The effect of additives on the surface state of the catalysts, heat of adsorption of reactant molecules, reaction intermediates, reaction pathways, reaction kinetics, and product distributions is/will be investigated by a series of experimental studies of NO adsorption, reaction probing, study state rate measurement, and transient kinetic study. A better understanding of the role of additives on the synthesis reaction may allow us to use chemical additives to manipulate the catalytic properties of Rh- and Ni-based catalysts for producing high yields of ethanol from snygas. 27 refs., 2 figs., 2 tabs.

This project is sponsored by the United States Department of Energy (DOE) for the Engineering Design and Analysis of Advanced Physical Fine Coal Cleaning Technologies. The major goal is to provide the simulation tools for modeling both conventional and advanced coal cleaning technologies. This DOE project is part of a major research initiative by the Pittsburgh Energy Technology Center (PETC) aimed at advancing three advanced coal cleaning technologies-heavy-liquid cylconing, selective agglomeration, and advanced froth flotation through the proof-of-concept (POC) level.

The Hanford Site Environmental Report is prepared annually to summarize environmental data and information, describe environmental management performance, and demonstrate the status of compliance with environmental regulations. The report also highlights major environmental programs and efforts. The following sections: describe the Hanford Site and its new mission; summarize the status in 1990 of compliance with environmental regulations; describe the environmental programs at the Hanford Site; present information on environmental surveillance and the ground-water protection and monitoring program; and discuss activities to ensure quality.

Until 1988, solutions containing sodium hydroxide, nitride acid, low levels of radionuclides (mostly tritiated water) and some metals were discharged to unlined seepage basins at the F and H Areas of the Savannah River Site (SRS) as part of normal operations (Killian et al, 1987a,b). The basins are now being closed according to the Resource Conservation and Recovery Act (RCRA). As part of the closure, a Part B Post-Closure Care Permit is being prepared. The information included in this report will fulfill some of the data requirements for that Part B permit. Several soil and water samples were collected along the Four Mile Creek (FMC) seepline at the F H Areas of the Savannah River Site. The samples were analyzed for concentrations of metals, radionuclides, and inorganic constituents. The goal of the work reported herein is to document the impacts from the basins of FMC has been completed in a phased approach.

The technical progress achieved during the period 30 September 1911 through 29 March 1992 on Contract DE-AC03-91SF18852.000 Radioisotope Thermoelectric Generators and Ancillary Activities is described in this document. This report is organized by the program task structure as follows: spacecraft integration and liaison, engineering support, safety, qualified unicouple production, ETG fabrication, assembly and test, ground support equipment (GSE), RTG shipping and launch support, designs, reviews, and mission applications, project management, quality assurance, reliability, contract changes, and non-capital CAGO, and CAGO acquisition (Capital Funds).

Circulating fluidization is a promising technology for designing efficient coal combustors with high solid feed rates. Unfortunately, limited understanding of circulating fluidized beds (CFB) has rendered design extrapolations from pilot reactors to full-scale plants both empirical and expensive. In CFBs, hydrodynamics and heat transfer are difficult to predict, and the behavior of the flow under scale-up is unclear. Thus the objectives of this research were to quantify the effect of scale-up on the hydrodynamics of CFB combustors, to carry out a rigorous analysis of the flow and heat transfer in vertical gas-solid risers, and to interact with industry at all stages of this work. The importance of this research resides in the great number of CFB coal-burning powerplants that may benefit from its results. At the completion of this work, the results have exceeded the expectations outlined in the original proposal. The present report summarizes these accomplishments, which have led to five archival publications, two reviewed conference papers, twelve presentations, various quarterly reports, and the award of five graduate degrees.

Several soil and water samples were collected along the Four Mile Creek (FMC) seepline at the F H Areas of the Savannah River Site. The samples were analyzed for concentrations of metals, radionuclides, and inorganic constituents. The results of the analyses are summarized below for the soil and water samples.

This document establishes the software design, nomenclature, and conventions for industrial Computed Tomography (CT) used in the Nondestructive Evaluation Section at Lawrence Livermore National Laboratory. It is mainly a users guide to the technical use of the CT computer codes, but also presents a proposed standard for describing CT experiments and reconstructions. Each part of this document specifies different aspects of the CT software organization. A set of tables at the end describes the CT parameters of interest in our project. 4 refs., 6 figs., 1 tab.

The US Department of Energy's Office of Health and Environmental Research (OHER) has supported work in our laboratory since 1977. The general theme of this program has been the identification of potentially toxic organic compounds associated with various combustion effluents, following the fates of these compounds in the environment, and improving the analytical methodology for making these measurements. The projects currently investigation include: an improved sampler for semi-volatile compounds in the atmosphere; the wet and dry deposition of dioxins and furans from the atmosphere; the photodegradation and mobile sources of dioxins and furans; and the bioaccumulation of PAH by tree bark. These projects are all responsive to OHER's interest in the pathways and mechanisms by which energy-related agents move through and are modified by the atmosphere''. The projects on gas chromatographic and liquid chromatographic tandem mass spectrometry are both responsive to OHER's interest in new and more sensitive technologies for chemical measurements''. 35 refs., 9 figs.

With support provided by the LLNL Accelerator Mass Spectrometry Laboratory, the UCR Radiocarbon Laboratory continued its studies involving sample pretreatment and target preparation for both AMS radiocarbon ({sup 14}C) and radiocalcium ({sup 41}Ca) involving applications to archaeologically -- and paleoanthropologically- related samples. With regard to AMS {sup 14}C-related studies, we have extended the development of a series of procedures which have, as their initial goal, the capability to combust several hundred microgram amounts of a chemically-pretreated organic sample and convert the resultant CO{sub 2} to graphitic carbon which will consistently yield relatively high {sup 13}C{sup {minus}} ion currents and blanks which will yield, on a consistent basis, {sup 14}C count rates at or below 0.20% modern, giving an 2 sigma age limit of >50,000 yr BP.

The high-energy ring (HER) of the B-Factory, running at an energy of 9 GeV, generates the synchrotron spectrum when applied to a ring with the PEP bending radius. The B-Factory HER may also run at 12 GeV, producing the harder spectrum. Depending upon beam-pipe material and thickness, some of this radiation may escape and deposit energy in the surrounding material. This was originally pointed out in PEP-109 during the initial design of PEP, and subsequently verified by measurements at both PEP and PETRA at DESY. Of concern to the B Factory is magnet insulation, though other adjacent materials such as wire insulation and cooling water hoses are even more radiosensitive. Radiation damage to magnets is a function of the type of material used in the potting compound. The PEP magnets, which hopefully can be used for the high-energy ring of the B-Factory, are insulated with an epoxy composed of DER-332, DER-732, NMA and aluminum oxide. It is estimated that this epoxy compound should tolerate doses near the 10{sup 10} rad range. To summarize the results of these calculations, 0.87 cm of copper is needed at the point of maximum dose from 12-GeV operation in order to reach the dose criterion …

The major goal is to provide the simulation tools for modeling both conventional and advanced coal cleaning technologies. This DOE project is part of a major research initiative by the Pittsburgh Energy Technology Center (PETC) aimed at advancing three advanced coal cleaning technologies- heavy-liquid cylconing, selective agglomeration, and advanced froth flotation through the proof-of- concept (POC) level. The commercially available ASPEN PLUS process simulation package will be extended to handle coal applications. Algorithms for predicting the process performance, equipment size, and flowsheet economics of commercial coal cleaning devices and related ancillary equipment will be incorporated into the coal cleaning simulator. This report is submitted to document the progress of Aspen Technology, Inc. (ApsenTech), its contractor, ICF Kaiser Engineers, Inc., (ICF KE) and CQ Inc., a subcontractor to ICF KE, for the seventh quarterly reporting period, April through June 1991. ICF KE is providing coal preparation consulting and processing engineering services in this work and they are responsible for recommending the design of models to represent conventional coal cleaning equipment and costing of these models.

A simple mixing-length estimate of diffusion of alphas particles by toroidicity-induced shear Alfven eigenmodes (TAE) is used, in zero and one-dimensional models, to evaluate the importance of diffusion of meeting ignition requirements for ITER and other next-generation burning plasma experiments. It is found that, depending on a number of assumptions, diffusion could reduce that effectiveness of alpha heating in the core as much as an order of magnitude. However, the effect would be less if only alphas resonant with the Alfven waves diffuse. Also, in the Appendix it is argued that the mixing length diffusion formula, though qualitatively reasonable, may be an over estimate. 12 refs., 7 figs., 1 tab.

The objective of this research is to elucidate the role of various chemical additives on ethanol synthesis over Rh- and Ni-based catalysts. Chemical additives used for this study will include S, P, Ag, Cu, Mn, and Na which have different electronegativities. The effects of additives on the surface state of the catalysts, heat of adsorption of reactant molecules, reaction intermediates, reaction pathways, reaction kinetics, and product distributions is/will be investigated by a series of experimental studies of NO adsorption, reaction probing, study state rate measurement, and transient kinetic study. A better understanding of the role of additives on the synthesis reaction may allow us to use chemical additives to manipulate the catalytic properties of Rh- and Ni-based catalysts for producing high yields of ethanol from syngas.

The overall objective of this program is to develop the diesel engine and lubricant system design approach that has the highest probability for commercial acceptance. Several specific objectives can also be identified. These objectives include: Definition of the dominant wear mechanisms prevailing in coal-fueled diesel engines; Definition of the specific effect of each coal-related lube oil contaminant; Determination of the potential of traditional engine lubrication design approaches to either solve or mitigate the effects of the coal related lube oil contaminants; Evaluation of several different engine design approaches aimed specifically at preventing lube oil contamination or preventing damage due to lube oil contamination; and Presentation of the engine/lubricant system design determined to have the most potential.

Task 3 provides detailed characterization of fuel properties of the test coals and in-depth evaluation of their performance characteristics under controlled pilot-scale combustion testing. Results from this task provide fundamental information required to develop some of the improved algorithms for the CQE. Both bench-scale fuel characterization and test furnace performance evaluations are being performed under this task. All pilot-scale combustion tests under this task have been completed. Topical reports for the coals evaluated under the Public Service Oklahoma's Northeastern Unit 4 and Northern States Power's King Unit 1 test series have been issued. Work continued during the past quarter on preparation of the final report for the Mississippi Power Company's Watson Unit 4 tests (to be completed first quarter 1993) and analyzing pilot-scale combustion data from the Alabama Power Company's Gaston tests; a topical report for the Gaston study will also be issued in 1993. Bench-scale testing and data analyses continued in support of the development of the slagging and fouling models. Data obtained from the analysis of samples of deposits, inflame solids, fly ash, and coal from CQE pilot-scale and drop tube combustion tests were evaluated for use in devising and verifying the slagging and fouling algorithms.

The present research program entitled Grain Boundary Diffusion in Oriented Ni{sub 3}Al Bicrystals Containing Boron'' was granted to Lehigh University for a period of three years (September 1, 1986 to August 31, 1989). The work on grain boundary diffusion in Ni{sub 3}Al was partially completed. On the other hand, a number of new properties have been explored. Some additional efforts have been made on diffusion in newly discovered oxide superconductors.