The study of the flame photometric method for determining the concentration of tributylphosphate (TBP) in a hydrocarbon diluent was undertaken because it showed promise of being economically competitive and subject to fewer interferences than the existing methods. The determination of TBP in the hydrocarbon solutions throughout the range 0.01 to 80 per cent TBP may be performed using the flame photometer. The principal conclusions resulting from the study found a that there was higher precision in the one to two percent TBP rang than the 45 per cent TBP level due to error in reproducing narrow slit width in the higher range, 2) nitric acid, uranyl nitrate, and thorium nitrate all interfere if present but can be eliminated by contacting the solution with water or sodium carbonate solution. 3) a single determination may be made in 15 minutes, multiple determinations can be made at a rate of one to two minutes per determination, and 4) a modification of an existing method makes possible the application of this method to the determination of TBP dissolved in aqueous samples. A relative precision of plus of minus five per cent (95 per cent confidence level) is obtained.

A plutonium solution of known Pu-241 content was purified by solvent extraction techniques to remove uranium and americium impurities. Portions of this purified solution were then analyzed for U-237 as a function of time. Since the growth of U-237 occurs directly by the alpha decay of Pu-241, these measurements provided sufficient data for calculation of the Pu-241 alpha half-life, which was found to be 2.91 ± 0.50 x 10⁵ years.

The purpose of this report is to present a HAPO proposal for the design and construction of a high-temperature, high-pressure light water recirculation test facility for the Westinghouse Electric Corporation, Atomic Power Division This report does not attempt to justify the feasibility of site location nor does it attempt to elaborate on such technical considerations as permissible test specimen heat generation and enrichment requirements which have been covered in an earlier document. Instead, detail information is developed on the proposed design with major emphasis on detail descriptions of the proposed loop and auxiliaries, design and construction scheduling and costs, and operating costs.

Sinterability studies on mixtures of UO2 and PuO2 powders have been continued. All of the censities from previous sintering experiments have been recalculated utilizing a somewhat different water immersion technique. Since densities of pellete obtained by physical dimensions are inaccurate due to chipping, and water immersion does not account for the open porosity, the pellets were coated with clear krylon before being immersed in water. This effectively sealed the open pores. Plots of density versus composition still indicate a drastic reduction in UO2 sinterability with even the slightest additions of PuO2 and a rapid increase with PuO2 contents greater than 20 weight percent. The following table compares densities of pure UO2 and PuO2 after an eight hour soak time:

Conceptual design studies conducted at HAPO indicate that the improved thermal efficiencies which can be obtained in a high pressure, high temperature, nuclear-electric power plant might reduce unit power costs substantially. The Plutonium Recycle Test Reactor (PRTR) is designed primarily to investigate various facets of plutonium recycle operation. In order to increases the usefulness of the PRTR as an experimental tool, it is desirable to include facilities for testing materials and fuel concepts under a variety of conditions, including the high temperatures and pressures which may be encountered in future water-cooled power reactors.

The spontaneous fission rate of plutonium-240 has been redetermined and found to be 1.51 X 106 events/g/hr.

Hanford uranium contains minute angular inclusions which affect the microstructure, reactivity, and other important factors controlling the serviceability of the metal. Small quantities of the inclusions have been isolated by chemical means, and the x-ray diffraction patterns and chemical analyses of the isolated materials have been determined. As a first step in the identification of the inclusions present in rolled uranium, a search was made for a chemical method of separating the inclusions from the matrix metal.

The construction and operation of a fission gas generator, containing about 25 grams of uranium in the form of a powder with a high specific surface, are described in detail. The purpose of the work discussed in this report was to examine the feasibility of producing, separating, and assaying samples of Xe135 in preparation for a proposed measurement of the neutron cross section of this isotope. Krypton and xenon are separated by selective adsorption on charcoal at reduced temperature while iodine is removed by charcoal sorption at room temperature.

The Hanford Remote Pipetter has developed into a very useful tool for routine pipetting by semi-skilled non-technical personnel. Radiation exposure to the operators has decreased to normal background levels as proper shielding exists between the sample and the operator. The results achieved by the pipetter have demonstrated its flexibility and simplicity of operation.

Report from Hanford Laboratories concerning "the design and construction of the 100-N Reactor and heat dissipation plant complete with the necessary auxiliaries" (p. 2). Details of its construction and the plant's systems and instrumentation are described as well as economic considerations.

Review of previous work is presented in addition to the results of recent studies concerning loss of primary coolant when the system is cold and pressurized and the problem of supplying adequate cooling following the injection of light water.

This report describes the development of an ultrasonic instrument for resin level measurements in an ion exchange column.

Specifications including detail dimension, materials, fabrication steps, acceptance criteria, and final assembly steps for the swaged uranium dioxide, 19-rod cluster Plutonium Recycle Test Reactor fuel element.

Report regarding ongoing research and development undertaken at Hanfdord Laboratories' physics and instruments laboratory and chemical laboratory.

Report presenting research and development activities in the field of radioactive wastes. This particular report is concerned with the fixation of radioactive residues when the failure of a pot liner destroyed the furnace.

Investigation of principles of pulse-column design and effects of operating variables.

Chain reacting conditions for plutonium nitrate in water solution have been examined experimentally for a variety of sizes of spheres and cylinders.

Basic information on the design of the Knolls Atomic Power Laboratory (KAPL) -120 loop.

Report that describes the reactor physics of the processes used to produce plutonium at Hanford Laboratories. This includes a basic explanation of nuclear physics and the principles of the reactor process.

An electromagnetic eddy current instrument is described that is capable of measuring copper and nickel plating 1 to 8 mils thick plated on bismuth mandrils of various sizes and shapes.

Describes the design criteria, design details, and final installation of a high precision temperature and intimate contact monitor.

Graphs for estimation of plutonium and trans-plutonium isotopic content of irradiated plutonium reactor fuel of various initial isotopic compositions.

Plutonium Oxide Fuels. Mixtures of PWR grade UO2 containing 10, 20, 30, 40, 50, and 60 w/o PuO2 were sintered in hydrogen for 44 hours at 1600 C to get additional data on solubility in this system. Densities of all the pieces were low, approximately 80 percent of theoretical; however, solid solution formation was complete in every case. The low density material should not affect lattice parameter values, but it did slightly reduce the intensity of the reflections.

Plutonium Fuels Development Basic studies. Experiments to determine the effect of plutonium dioxide additions on the sinterability of UO2 have continued. PuO2 has been added to ball milled PWR grade UO2 as a physical mixture, and in the form of the mixed crystal oxide.