Separate abstracts were prepared for thirty-one of the thirty-three sections. Of the sections not abstracted, the one entitled Fission Product Transport'' contained no information, the other, Transport of Noble Gases in Graphite'' is available in a more complete form as ORNLTM-I35 (NSA 16: 9209) (J.R.D.)

The id Thorex process, in which nitric acid is the salting'' agent in the solvent extraction of Th and U from an acid eficient feed with TBP in Amsco, was demonstrated in laboratory equipment for the recovery of synthetic Co solidated Edison Thorium Reactor fuel containing trace fission products. The acid was removed from solution of the declad fuel pellets to produce an acid deficient feed by steam stripping, and the adjusted feed was treated with bisulfite to decrease the extractability of fission products. The Th and U were extracted with 30% TBP in Amsco, and pregnant organic was scrubbed with dilute nitric acid to improve decontamination. Additional acid was added to the extraction section to increase the distribution oefficient of the Th, The Th and U could then be stripped ther simultaneously or separately. No difficulties were ound with either excessive reflux of acid or <0.3%. The co centrated aqueous waste was about 0.2 liter per kilog am of Th processed, about 1/10 of that from the aluminum n trate-salted process. Engineering studies showed that the stage height in the extraction column with the acid Thorex process was 2.1 ft compared with 4 ft with the aluminum-salted Thorex process. …

A review of radiation effects on graphite is presented. Included are discussions of the general relations of these effects with original structural properties, and details of radioinduced changes. Other discussions are devoted to stored energy, annealing, and future problems in the use of nuclear graphite. Data and illustrations concerning structure and radioinduced changes are included. (J.R.D.)

A year of data from sonic anemometer and mechanical wind sensors was analyzed and compared at a low-wind site. Results indicate that 15-minute average and peak 1-second wind speeds (u) from the sonic agree well with data derived from a co-located cup anemometer over a wide range of speeds. Wind direction data derived from the sonic also agree closely with those from a wind vane except for very low wind speeds. Values of standard deviation of longitudinal wind speed ({sigma}{sub u}) and wind direction fluctuations ({delta}{sub {theta}}) from the sonic and mechanical sensors agree well for times with u &gt; 2 ms{sup -1} but show significant differences with lower u values. The most significant differences are associated with the standard deviation of vertical wind fluctuations ({sigma}{sub w}): the co-located vertical propeller anemometer yields values increasingly less than those measured by the sonic anemometer as u decreases from 2.5 approaching 0 ms{sup -1}. The combination of u over-estimation and under-estimation of {sigma}{sub w} from the mechanical sensors at low wind speeds causes considerable under-estimation of the standard deviation of vertical wind angle fluctuations ({sigma}{sub {phi}}), an indicator of vertical dispersion. Calculations of {sigma}{sub {phi}} from sonic anemometer measurements are typically 5{sup …

A number of organisms have been examined for their ability to produce electron-spin-resonance signals at low temperatures in response to illumination. The efficiency of the response is of the order of not less than 5%, and the wavelength for maximum response is generally slightly on the longer side of the wavelength of maximum absorption, with a minimum appearing at the wavelength of maximum absorption.

None

A relatively simple, quantitative approach is proposed to address a specific, important gap in the appr approach recommended by the USEPA Guidelines for Cancer Risk Assessment to oach address uncertainty in carcinogenic mode of action of certain chemicals when risk is extrapolated from bioassay data. These Guidelines recognize that some chemical carcinogens may have a site-specific mode of action (MOA) that is dual, involving mutation in addition to cell-killing induced hyperplasia. Although genotoxicity may contribute to increased risk at all doses, the Guidelines imply that for dual MOA (DMOA) carcinogens, judgment be used to compare and assess results obtained using separate 'linear' (genotoxic) vs. 'nonlinear' (nongenotoxic) approaches to low low-level risk extrapolation. However, the Guidelines allow the latter approach to be used only when evidence is sufficient t to parameterize a biologically based model that reliably o extrapolates risk to low levels of concern. The Guidelines thus effectively prevent MOA uncertainty from being characterized and addressed when data are insufficient to parameterize such a model, but otherwise clearly support a DMOA. A bounding factor approach - similar to that used in reference dose procedures for classic toxicity endpoints - can address MOA uncertainty in a way that avoids explicit modeling …

Incubation services were provided to companies and inventors with products and technologies with clean or renewable energy market potential.

Objective of the evaluation is to evaluate the effectiveness of the electrostatic prefilter in prolonging the life of HEPA (high-efficiency particulate-air) filters. The theory of the electrostatic filter is reviewed, and Glove Box Number 046 is described in detail, followed by a description of the electrostatic prefilter used in the present application. Engineering drawings of the electrostatic prefilter are included. The procedure for evaluating the electrostatic prefilter includes the steps for conducting five different tests: evaluating (1) the HEPA filter alone, (2 and 3) the HEPA filter with a standard prefilter treated both as disposable and reusable, and (4 and 5) the HEPA filter with the electrostatic prefilter, again treated as disposable and reusable. Procedures for flowmeter calibrations and measurements of particle-size distributions are also included. Long-term maintenence of the system during the evaluation program is outlined, and estimates of component durability are given. An electrical engineering safety note describes the high-voltage operational hazard of the electrostatic prefilter and the testing of safety devices (the current-overload trip circuit, the filter-door-interlock system, and the current-limiting resistor).

Object-Oriented Technology (OOT), although not a new paradigm, has recently been prominently featured in the trade press and even general business publications. Indeed, the promises of object technology are alluring: the ability to handle complex design and engineering information through the full manufacturing production life cycle or to manipulate multimedia information, and the ability to improve programmer productivity in creating and maintaining high quality software. Groups at a number of the DOE facilities have been exploring the use of object technology for engineering, business, and other applications. In this white paper, the technology is explored thoroughly and compared with previous means of developing software and storing databases of information. Several specific projects within the DOE Complex are described, and the state of the commercial marketplace is indicated.

The Low-NO{sub x} Cell{trademark} Burner operates on the principle of staged combustion. The lower burner of each two-nozzle cell is modified to accommodate all the fuel input previously handled by two nozzles. Secondary air, less than theoretically required for complete combustion, is introduced to the lower burner. The remainder of secondary air is directed to the upper port'' of each cell to complete the combustion process. B W/EPRI have thoroughly tested the LNCB{trademark} at two pilot scales (6 million Btu per hour and 100 million Btu per hour), and tested a single full-scale burner in a utility boiler. Combustion tests at two scales have confirmed NO{sub x} reduction with the low-NO{sub x} cell on the order of 50% relative to the standard cell burner at optimum operating conditions. The technology is now ready for full unit, full-scale demonstration.

The principal objective of this research is to determine the role that host petroleum-derived oils (1000 [degree]F[sup +]), as that of catalytically treated host oils, play when used as liquefaction solvents in coprocessing with coal. The host oils will be extensively characterized and then pretreated in a number of ways which involve catalytic reactions such as hydrogenation, hydrocracking, and isomerization. The pretreated oils will then be characterized by elemental analysis, catalytic dehydrogenation, and NMR. The effects of the host oil on coprocessing with coal will be compared to those obtained using catalytically modified heavy oils. When appropriate, model compounds will be used to study specific reactions brought about by the pretreatments. A total of 18 pretreatment runs have been made on an AMOCO vacuum tower residuum, VTR, in an attempt to increase its hydrogen content from 10.2 wt % to a level of about 11.5%. This pretreatment resulted in a significant increase in the hydrogen content of the starting oil (10.2 wt % to 11.2%).

The Internal Dosimetry Department at the Y-12 Plant maintains a state-of-the-art bioassay program managed under the guidance and regulations of the Department of Energy. The two major bioassay techniques currently used at Y-12 are the in vitro (urinalysis) and in vivo (lung counting) programs. Fecal analysis (as part of the in vitro program) is another alternative; however, since both urine and fecal analysis provide essentially the same capabilities for detecting exposures to uranium, the urinalysis is the main choice primarily for aesthetic reasons. The bioassay frequency is based on meeting NCRP 87 objectives which are to monitor the accumulation of radioactive material in exposed individuals, and to ensure that significant depositions are detected.

This Environmental Radiation Monitoring Plan (ERM) discusses sampling soils, vegetation, and biota for depleted uranium (DU) and beryllium (Be) at Yuma Proving Ground (YPG). The existing ERM plan was used and modified to more adequately assess the potential of DU and Be migration through the YPG ecosystem. The potential pathways for DU and Be migration are discussed and include soil to vegetation, soil to animals, vegetation to animals, animals to animals, and animals to man. Sample collection will show DU deposition and will be used to estimate DU migration. The number of samples from each area varies and depends on if the firing range of interest is currently used for DU testing (GP 17A) or if the range is not used currently for DU testing (GP 20). Twenty to thirty-five individual mammals or lizards will be sampled from each transect. Air samples and samples of dust in the air fall will be collected in three locations in the active ranges. Thirty to forty-five sediment samples will be collected from different locations in the arroys near the impact areas. DU and Be sampling in the Hard Impact and Soft Impact areas changed only slightly from the existing ERM. The modifications are …

The rail shipment of large quantities of radiocesium involves a potential accidental release of this material in a readily available form to the biosphere. The magnitude of the associated potential damage to man and his environment is evaluated in this report. The evaluation of the consequences of an accidental release of Cs-137 from the Shielded Transfer Tank, Model II (STT) assumes loss of Cs-137 to the atmosphere or to surface-water. Release to the atmosphere could result from a collision followed by fire or explosion. In the event of a fire, a small fraction of the Cs-137 vould be volatilized. An explosion would disperse the Cs-137 still adsorbed to Decalso as particulates. In either case, the material is assumed to be dispersed by atmospheric mechanisms which can be described by modified Sutton equations. The accident involving a fire or explosion assumes that 1 percent or 10 percent, respectively, of 90,000 curies of Cs-137 is dispersed in a metropolitan area. Contamination of the surrounding suburban area is also involved. Damage estimates amount to about 60 million dollars and 400 million dollars, corresponding to a 1 percent and a 10 percent release respectively. Another possible type of accident involves the release of the …

This project plan establishes the management framework for conduct of the TWRS Single-Shell Tank Interim Stabilization completion program. Specifically, this plan defines the mission needs and requirements; technical objectives and approach; organizational structure, roles, responsibilities, and interfaces; and operational methods. This plan serves as the project executional baseline.

The principal objective of this research is to determine the role that host petroleum-derived oils (1000 {degree}F{sup +}), as that of catalytically treated host oils, play when used as liquefaction solvents in coprocessing with coal. The host oils will be extensively characterized and then pretreated in a number of ways which involve catalytic reactions such as hydrogenation, hydrocracking, and isomerization. The pretreated oils will then be characterized by elemental analysis, catalytic dehydrogenation, and NMR. The effects of the host oil on coprocessing with coal will be compared to those obtained using catalytically modified heavy oils. When appropriate, model compounds will be used to study specific reactions brought about by the pretreatments. A total of 18 pretreatment runs have been made on an AMOCO vacuum tower residuum, VTR, in an attempt to increase its hydrogen content from 10.2 wt % to a level of about 11.5%. This pretreatment resulted in a significant increase in the hydrogen content of the starting oil (10.2 wt % to 11.2%).

None

None

The Low-NO{sub x} Cell{trademark} Burner operates on the principle of staged combustion. The lower burner of each two-nozzle cell is modified to accommodate all the fuel input previously handled by two nozzles. Secondary air, less than theoretically required for complete combustion, is introduced to the lower burner. The remainder of secondary air is directed to the upper ``port`` of each cell to complete the combustion process. B&W/EPRI have thoroughly tested the LNCB{trademark} at two pilot scales (6 million Btu per hour and 100 million Btu per hour), and tested a single full-scale burner in a utility boiler. Combustion tests at two scales have confirmed NO{sub x} reduction with the low-NO{sub x} cell on the order of 50% relative to the standard cell burner at optimum operating conditions. The technology is now ready for full unit, full-scale demonstration.

During the second quarter, we initiated Task 2 (Process and Catalyst Variable Study). This task involves an investigation of methods for vanadium phosphate (VPO) catalyst synthesis and activation as well as detailed testing of the catalysts produced for activity and selectivity in methane selective oxidation. As we initiated work on Task 2, three problem areas were identified: Preparation of catalysts with P:V ratio greater than 1. Activation of the precursor to produce the B-phase described in the patent literature. Achieving high (>95 percent) carbon balances in the bench-scale test unit. Each of these problems has been addressed and overcome during this quarter. Several catalysts with P:V ratios ranging from 0.95 to 1.1 have been prepared. Activation procedures are continuing to be investigated. We have found several procedures which yield catalysts having the desired X-ray diffraction pattern. The reactor system was modified and analytical procedures improved so that in a 7-day run using V{sub 2}O{sub 5} as the catalyst, carbon balances ranged from 95 to 105 percent.

None

The objective of this supplement is to determine the effects of operation with neutral pH water on crud deposition on fuel surfaces. This supplement authorizes testing designed to show the effects of coolant pH on the thickness of the crud layer deposited on fuel elements. The supplement will not require additional reactor down time nor will it introduce any hazards to the reactor.

Linear stability analysis of a two-cylinder approximation to gun injection--one cylinder to represent the confined spheromak and another to represent the gun--is shown to yield equilibria in which tearing modes exist simultaneously at the magnetic axis and at the geometric (gun) axis, as might be required to sustain helicity injection. These equilibria are MHD stable at the two axes but may have localized MHD instability at an interior minimum in the q profile. The theory predicts two tearing thresholds with successively deeper q minima as the gun current is increased at constant bias flux.