The trip provided an opportunity for extensive discussions with the staff of the Institut de Genie Atomique (IGA) of the Ecole Polytechnique Federale de Lausanne (EPFL). The discussions covered both the planning of the first series of experiments to be performed in the Hybrid Experiment (hereafter referred to as LOTUS) and the status of calculational work being performed at the University of Washington in support of the LOTUS project.

Creep data from the literature search is reinterpreted by SGI, resulting in a better understanding of the temperature and stress state dependence of the octahedral creep rate and the octahedral shear strength. The concept of a transition strength between the elastic and the plastic states is in agreement with the data. The elastic and rheological properties of salt are described, and a set of constitutive equations is presented. The dependence of material properties on parameters such as temperature is considered. Findings on the permeability of salt are summarized, and the in-situ behavior of openings in bedded salt is described based on extensive engineering experience. A stress measuring system utilizing a finite element computer code is discussed. Geological factors affecting the stability of salt openings are considered, and the Stress Control Technique for designing stable openings in bedded salt formations is explained.

The objective of this program is to design, fabricate and demonstrate an automated solar cell module production line with the ultimate goal of reducing module assembly costs. During this reporting period a redesign of the SCAP soldering mechanism was effected due to temperature/friction problems encountered. The in-line cleaning system was designed and ordered and the Mular backbone attachment mechanism was assembled. The SPLP production prototype was fabricated and operated. Two hand-assembled versions of the automated module design completed 750 thermal cycles. Albuquerque Laboratory, Ardev Inc., is under subcontract to develop the soldering equipment on this program. The lamination development is being done by ARCO Solar, Inc.

Work conducted on a basic technology development effort with the Westinghouse Sodium Ionization Detector (SID) sensor is reported. Included are results obtained for three task areas: (1) On-line operational response testing - in-situ calibration techniques; (2) Performance-reliability characteristics of aged filaments; and (3) Evaluation of chemical interference effects. The results showed that a calibrator filament coated with a sodium compound, when activated, does supply the necessary sodium atoms to provide a valid operational in-situ test. The life time of new Cr/sub 2/0/sub 3/-protected SID sensor filaments can be extended by operating at a reduced temperature. However, there also is a reduction in the sensitivity. Non-sodium species, such as products from a smoldering fire and organic aerosols, produce an interference response from the sensor comparable to a typical sodium response.

The storage ring quadrupoles, sextupoles, and correction magnets will be mounted on a common girder approximately 4.0 m long. The rigid girder, in turn, is mounted on three five-ton jacks, each of which is mounted on a pedestal that is grouted and bolted to the floor. For this preliminary analysis, we will assume that the girder has a weight per unit length of 100 lb/ft and a bending stiffness that is significantly greater than the vertical stiffness provided by the pedestal (jack-screw) supports. This allows us to approximate the magnet/support system as a rigid beam (girder) on spring supports (jack-screws) carrying distributed masses (magnets). These approximations permit us to study the rigid body translational and rotational (rocking) modes of the system. It should be noted that the preliminary design has two jack-screw supports at the left end and one at the right end. It should be noted that the magnet/support system studied is only a conceptual design. In actuality, there are five different magnet/support configurations comprising each of the 40 sectors of the storage ring. Also, it is expected that the details of the final design, in particular with respect to the positioning of the pedestal supports, will somewhat different. …

During this second quarter, meetings were held with contractors on the ERDA Fuel Gas from Animal Waste Program to discuss project planning and review. Site visits were made to groups involved in anaerobic digestion. An engineering and economic analysis of a process for the anaerobic digestion of animal residue was completed; the results can be used for the design of a pilot plant unit. A comprehensive engineering report of this analysis was completed, and a first draft was submitted to ERDA. Several proposals were received from ERDA and reviewed.

Following construction and prior to commissioning a compressor system, it is necessary to test the piping, fill the purification vessels with adsorbents and remove all contaminants. The technical papers incoprorated in this report give detailed procedures for those tasks. (GHT)

Nationwide, the demand for electricity due to population and industrial growth is on the rise. However, climate change and air quality issues raise serious questions about the wisdom of addressing these shortages through the construction of additional fossil fueled power plants. In 1997, the President's Committee of Advisors on Science and Technology Energy Research and Development Panel determined that restoring a viable nuclear energy option was essential and that the DOE should implement a R&D effort to address principal obstacles to achieving this option. This work has addressed the need for improved thermal/fluid analysis capabilities, through the use of computational fluid dynamics, which are necessary to support the design of generation IV gas-cooled and supercritical water reactors.

The Fast Ignition (FI) concept for Inertial Confinement Fusion (ICF) has the potential to provide a significant advance in the technical attractiveness of Inertial Fusion Energy (IFE) reactors. FI differs from conventional 'central hot spot' (CHS) target ignition by using one driver (laser, heavy ion beam or Z-pinch) to create a dense fuel and a separate ultra-short, ultra-intense laser beam to ignite the dense core. FI targets can burn with {approx} 3X lower density fuel than CHS targets, resulting in (all other things being equal) lower required compression energy, relaxed drive symmetry, relaxed target smoothness tolerances, and, importantly, higher gain. The short, intense ignition pulse that drives this process interacts with extremely high energy density plasmas; the physics that controls this interaction is only now becoming accessible in the lab, and is still not well understood. The attraction of obtaining higher gains in smaller facilities has led to a worldwide explosion of effort in the studies of FI. In particular, two new US facilities to be completed in 2009/2010, OMEGA/OMEGA EP and NIF-ARC (as well as others overseas) will include FI investigations as part of their program. These new facilities will be able to approach FI conditions much more closely …

The purpose of this paper is to report on processing of raw waveform data from 4547 events recorded at 12 stations between 2001 and 2005 by the Salton Sea Geothermal Field (SSGF) seismic network. We identified a central region of the network where vertically elongated distributions of hypocenters have previously been located from regional network analysis. We process the data from the local network by first autopicking first P and S arrivals; second, improving these with hand picks when necessary; then, using cross-correlation to provide very precise P and S relative arrival times. We used the HypoDD earthquake location algorithm to locate the events. We found that the originally elongated distributions of hypocenters became more tightly clustered and extend down the extent of the study volume at 10 Km. However, we found the shapes to depend on choices of location parameters. We speculate that these narrow elongated zones of seismicity may be due to stress release caused by fluid flow.

A study of the incorporation of {sup 14}CO{sub 2} into cell components of synchronously growing Chlorella pyrenoidosa has shown that DNA is synthesized primarily during the latter stages of the cell cycle prior to cell division. RNA was synthesized at an approximately equal rate during each of the three phases of the cell growth studied. No major differences were noted in the incorporation of {sup 14}CO{sub 2} into the soluble cell components in these long-term incorporation studies.

None

It has been successfully demonstrated in this program that a zirconia multilayer structure with rhodium-based porous electrodes performs well as an amperometric NOx sensor. The sensitivity of the sensor bodies operating at 650 to 700 C is large, with demonstrated current outputs of 14 mA at 500 ppm NOx from sensors with 30 layers. The sensor bodies are small (4.5 x 4.2 x 3.1 mm), rugged, and inexpensive. It is projected the sensor bodies will cost $5 - $10 in production. This program has built on another successful development program for an oxygen sensor based on the same principles and sponsored by DOE. This oxygen sensor is not sensitive to NOx. A significant technical hurdle has been identified and solved. It was found that the 100% Rh electrodes oxidize rapidly at the preferred operating temperatures of 650 - 700 C, and this oxidation is accompanied by a volume change which delaminates the sensors. The problem was solved by using alloys of Rh and Pt. It was found that a 10%/90% Rh/Pt alloy dropped the oxidation rate of the electrodes by orders of magnitude without degrading the NOx sensitivity of the sensors, allowing long-term stable operation at the preferred operating temperatures. …

The Siemens Advanced Quantra Fourier Transform Ion Cyclotron Resonance (FTICR) mass spectrometer was evaluated as an alternative instrument to large double focusing mass spectrometers for gas analysis. High resolution mass spectrometers capable of resolving the common mass isomers of the hydrogen isotopes are used to provide data for accurate loading of reservoirs and to monitor separation of tritium, deuterium, and helium. Conventional double focusing magnetic sector instruments have a resolution that is limited to about 5000. The Siemens FTICR instrument achieves resolution beyond 400,000 and could possibly resolve the tritium ion from the helium-3 ion, which differ by the weight of an electron, 0.00549 amu. Working with Y-12 and LANL, SRNL requested Siemens to modify their commercial Quantra system for low mass analysis. To achieve the required performance, Siemens had to increase the available waveform operating frequency from 5 MHz to 40 MHz and completely redesign the control electronics and software. However, they were able to use the previous ion trap, magnet, passive pump, and piezo-electric pulsed inlet valve design. NNSA invested $1M in this project and acquired four systems, two for Y-12 and one each for SRNL and LANL. Siemens claimed a $10M investment in the Quantra systems. The …

The objective of this task was to demonstrate that metal hydrides could be produced by mechanical alloying in the quantities needed to support the tritium production facilities at the Savannah River Site. The objective for the FY07 portion of this task was to demonstrate the production of Zr-Fe getter materials by mechanical alloying and begin to optimize the milling parameters. Three starting compositions (ratios of elemental Zr and Fe powders) were selected and attritor milled under argon for times of 8 to 60 hours. Hexane and liquid nitrogen were used as process control agents. In general, milling times of at least 24 hours were required to form the desired Zr{sub 2}Fe and Zr{sub 3}Fe phases, although a considerable amount of unalloyed Zr and Fe remained. Milling in liquid nitrogen does not appear to provide any advantages over milling in hexane, particularly due to the formation of ZrN after longer milling times. Carbides of Zr formed during some of the milling experiments in hexane. Formation of carbides during milling appears to be much less of an issue than formation of nitrides, although some of the phases that were not able to be identified in the XRD results may also be carbides. …

We analyze data from the Lawrence Livermore National Lab (LLNL) Electron Beam Ion Trap (EBIT) that simulates a CIE plasma by sweeping the electron beam to approximate a Maxwellian velocity distribution. These results are compared to spectra of confirmed astronomical CIE plasmas (e.g. outer regions of x-ray clusters) observed by XMM/RGS. We utilize the Photon Clean Method (PCM) to quantify these spectra (EBIT and XMM/RGS) in the form of ratios of Fe L lines in the emission complex near 1 keV. The variances of line fluxes are measured with bootstrap methods (Efron 1979). Both of these observations are further compared with theoretical predictions of Fe L line fluxes from APED and similar atomic databases.

None

This research and development program was designed to improve nondestructive evaluation of large mechanical objects by providing both fast and thermal neutron sources for radiography. Neutron radiography permits inspection inside objects that x-rays cannot penetrate and permits imaging of corrosion and cracks in low-density materials. Discovering of fatigue cracks and corrosion in piping without the necessity of insulation removal is possible. Neutron radiography sources can provide for the nondestructive testing interests of commercial and military aircraft, public utilities and petrochemical organizations. Three neutron prototype neutron generators were designed and fabricated based on original research done at the Lawrence Berkeley National Laboratory (LBNL). The research and development of these generators was successfully continued by LBNL and Adelphi Technology Inc. under this STTR. The original design goals of high neutron yield and generator robustness have been achieved, using new technology developed under this grant. In one prototype generator, the fast neutron yield and brightness was roughly 10 times larger than previously marketed neutron generators using the same deuterium-deuterium reaction. In another generator, we integrate a moderator with a fast neutron source, resulting in a high brightness thermal neutron generator. The moderator acts as both conventional moderator and mechanical and electrical support structure …

The 100-F-46 french drain consisted of a 1.5 to 3 m long, vertically buried, gravel-filled pipe that was approximately 1 m in diameter. Also included in this waste site was a 5 cm cast-iron pipeline that drained condensate from the 119-F Stack Sampling Building into the 100-F-46 french drain. In accordance with this evaluation, the confirmatory sampling results support a reclassification of this site to No Action. The current site conditions achieve the remedial action objectives and the corresponding remedial action goals established in the Remaining Sites ROD. The results of confirmatory sampling show that residual contaminant concentrations do not preclude any future uses and allow for unrestricted use of shallow zone soils. The results also demonstrate that residual contaminant concentrations are protective of groundwater and the Columbia River.

In this LDRD project, our research purpose is to investigate the science and technology necessary to enable real-time array imaging as a rapid way to detect hidden threats through obscurants such as smoke, fog, walls, doors, and clothing. The goal of this research is to augment the capabilities of protective forces in concealed threat detection. In the current context, threats include people as well as weapons. In most cases, security personnel must make very fast assessments of a threat based upon limited amount of data. Among other attributes, UWB has been shown and quantified to penetrate and propagate through many materials (wood, some concretes, non-metallic building materials, some soils, etc.) while maintaining high range resolution. We have build collaborations with university partners and government agencies. We have considered the impact of psychometrics on target recognition and identification. Specifically we have formulated images in real-time that will engage the user's vision system in a more active way to enhance image interpretation capabilities. In this project, we are researching the use of real time (field programmable gate arrays) integrated with high resolution (cm scale), ultra wide band (UWB) electromagnetic signals for imaging personnel through smoke and walls. We evaluated the ability of …

None

Cumulative reaction probability (CRP) calculations provide a viable computational approach to estimate reaction rate coefficients. However, in order to give meaningful results these calculations should be done in many dimensions (ten to fifteen). This makes CRP codes memory intensive. For this reason, these codes use iterative methods to solve the linear systems, where a good fraction of the execution time is spent on matrix-vector multiplication. In this paper, we discuss the tensor product form of applying the system operator on a vector. This approach shows much better performance and provides huge savings in memory as compared to the explicit sparse representation of the system matrix.

The Single Heater Test (SHT) is one of two in-situ thermal tests included in the site characterization program for the potential underground nuclear waste repository at Yucca Mountain. The heating phase of the SHT started in August 1996, and was completed in May 1997 after 9 months of heating. The coupled processes in the unsaturated fractured rock mass around the heater were monitored by numerous sensors for thermal, hydrological, mechanical and chemical data. In addition to passive monitoring, active testing of the rock mass moisture content was performed using geophysical methods and air injection testing. The extensive data set available from this test gives a unique opportunity to improve the understanding of the thermal-hydrological situation in the natural setting of the repository rocks. The present paper focuses on the 3-D numerical simulation of the thermal-hydrological processes in the SHT using TOUGH2. In the comparative analysis, they are particularly interested in the accuracy of different fracture-matrix-interaction concepts such as the Effective Continuum (ECM), the Dual Continuum (DKM), and the Multiple Interacting Continua (MINC) method.

Risk estimates derived from epidemiological studies of exposed populations, as well as the maximum permissible doses allowed for occupational exposure and exposure of the public to ionizing radiation are all based on the assumption that the human population is uniform in its radiosensitivity, except for a small number of individuals, such as ATM homozygotes who are easily identified by their clinical symptoms. The hypothesis upon which this proposal is based is that the human population is not homogeneous in radiosensitiviry, but that radiosensitive sub-groups exist which are not easy to identify. These individuals would suffer an increased incidence of detrimental radiation effects, and distort the shape of the dose response relationship. The radiosensitivity of these groups depend on the expression levels of specific proteins. The plan was to investigate the effect of 3 relatively rare, high penetrate genes available in mice, namely Atm, mRad9 & Brca1. The purpose of radiation protection is to prevent! deterministic effects of clinical significance and limit stochastic effects to acceptable levels. We plan, therefore to compare with wild type animals the radiosensitivity of mice heterozygous for each of the genes mentioned above, as well as double heterozygotes for pairs of genes, using two biological endpoints: …