First order leveling to be conducted as part of an environmental monitoring program for a geopressured test well was reported. 39.43 kilometers of first order levels were run to NGS specifications. Twelve Class B type bench marks were set to NGS specifications. The adjusted elevation of bench mark C-1209 was used as a starting elevation and is based on a supplementary adjustment of April 6, 1979 by NGS. The closure for the loop around the well site is -0.65 millimeters. The distance around the loop is 1.29 kilometers, the allowable error of closure was 4.54 millimeters. The initial leveling of this well was performed in 1977. A thorough search for their monumentation was conducted. No monuments were found due to the lack of adequate monument descriptions. Therefore, an elevation comparison summary for this report is only available along the NGS lines outside the well area. The first order level tie to line No. 101 (BMA-1208) was +3.37 millimeters in 17.21 kilometers. The allowable error of closure was 12.44 millimeters.

Analysis of 21 post-burn cores taken from the Hanna IV UCG site allows 96 m (315 ft) of overburden to be subdivided into four local stratigraphic units. The 7.6 m (25 ft) thick Hanna No. 1 coal seam is overlain by a laterally discontinuous, 3.3 m (11 ft) thick shaley mudstone (Unit A') in part of the Hanna IV site. A more widespread, 30 m (90 ft) thick well-indurated sandstone (Unit A) overlies the A' unit. Unit A is the roof rock for both of the Hanna IV cavities. Overlying Unit A is a 33 m (108 ft) thick sequence of mudstone and claystone (Unit B), and the uppermost unit at the Hanna IV site (Unit C) is a coarse-grained sandstone that ranges in thickness from 40 to 67 m (131 to 220 ft). Two elliptical cavities were formed during the two phases of the Hanna IV experiment. The larger cavity, Hanna IVa, is 45 x 15 m in plan and has a maximum height of 18 m (59 ft) from the base of the coal seam to the top of the cavity; the Hanna IVb cavity is 40 x 15 m in plan and has a maximum height of …

The feasibility of geothermal energy use at naval installations in Norfolk, VA, Jacksonville, FL, and Charleston, SC was assessed. Geophysical and geological studies of the above areas were performed. Engineering and economic factors, affecting potential energy use, were evaluated. The Norfolk and Jacksonville facilities are identified as candidates for geothermal systems. System costs are predicted. Economic benefits of the proposed geothermal systems are forecast, using the net present value method of predicting future income.

A survey of measuring devices or probes, which have been used to investigate gas-side fouling, has been carried out. Five different types of measuring devices are identified and discussed including: heat flux meters, mass accumulation probes, optical devices, deposition probes, and acid condensation probes. A total of 32 different probes are described in detail and summarized in matrix or tabular form. The important considerations of combustion gas characterization and deposit analysis are also given a significant amount of attention. The results of this study show that considerable work has been done in the development of gas-side fouling probes. However, it is clear that the design, construction, and testing of a durable versatile probe - capable of monitoring on-line fouling resistances - remains a formidable task.

This report delineates the scope of Jet Propulsion Laboratory`s FY`83 effort in the attitude control area in support of the SP-100 program. Dynamic modeling of the baseline beam configuration has been conducted and is presented herein. As a first cut, the beam is treated as rigid. Its inherent flexibility is then integrated via the hybrid coordinates method. Using the resulting dynamical equations, a preliminary look at attitude control is taken. Only one axis of rotational one flexible mode are included. An alternative to the beam configuration is one that envisions connecting basebody to user via a long, lightweight, flexible tether. A literature search has been conducted in this area and the resulting bibliography is presented. The tether option is not considered viable near term. However, it offers several potentially significant advantages and thus deserves serious consideration for the next generation space power system. This report also treats attitude control constraints imposed by the high temperature and radiation environment and addresses the issue of hardware requirements and availability. Recommendations for FY`84 tasks include assembling and exercising a simulation program for the beam configuration dynamic model and conducting a technology assessment in the area of tether dynamics and control.

The purpose of the present task is to develop high temperature multi-foil insulation suitable for use in the SP-100 thermoelectric converter project. Part of this task involves careful examination of alternative foil and foil spacing materials with the goal of effecting significant weight savings over current state-of-the-art foil insulation. This task involved the determination of the state-of-the-art foils, ascertaining what data is available, what additional data is required, preliminary assessment of the suitability of alternate foil and spacer materials, and specific recommendations for additional tests required to qualify new and existing insulation designs for use in the SP-100.

SP-100 is the designation for a nuclear reactor-based power plant being developed for both civil and military missions beginning in the 1990s for such potential space applications as communication satellites, space radar, electric propulsion and space stations. Typically, a system using the SP-100 along with a selected upper stage system would be launched by the National Space Transportation System (NSTS) Space Shuttle System into a near-earth orbit, deployed, and through upper stage propulsion burn(s) be inserted/transferred to its mission orbit. The nature of the advanced design SP-100 payloads using this power plant are physically and functionally compatible with the NSTS and meet the safety requirements thereof. The purpose of this document is to define and present the requirements and interface provisions that, when satisfied, will ensure technical compatibility between SP-100 systems and the NSTS.

Annual report of the Systems and Administration Services describing goals, activities, and accomplishments during fiscal year 1983.

Monthly reports documenting San Antonio municipal board activities and city permitting for January 1984.

This report is a compilation of selected articles, books, and executive agency and congressional publications on Medicare and Medicaid reimbursement, primarily to health facilities and physicians.

This report discusses questions dealing with the number of homeless Americans as well as trends in society's attitudes toward such people. The incidence of mental illness and the appropriateness, or lack thereof, of deinstitutionalization for such patients is another aspect of the problem which is covered in this packet. A CRS report gives an overview of the situation and of the Federal response.