Understanding the behavior of fractures and subsurface damage in the processes used during optic fabrication plays a key role in determining the final quality of the optical surface finish. During the early stages of surface preparation, brittle grinding processes induce fractures at or near an optical surface whose range can extend from depths of a few mm to hundreds of mm depending upon the process and tooling being employed. Controlling the occurrence, structure, and propagation of these sites during subsequent grinding and polishing operations is highly desirable if one wishes to obtain high-quality surfaces that are free of such artifacts. Over the past year, our team has made significant strides in developing a diagnostic technique that combines magnetorheological finishing (MRF) and scanning optical microscopy to measure and characterize subsurface damage in optical materials. The technique takes advantage of the unique nature of MRF to polish a prescribed large-area wedge into the optical surface without propagating existing damage or introducing new damage. The polished wedge is then analyzed to quantify subsurface damage as a function of depth from the original surface. Large-area measurement using scanning optical microscopy provides for improved accuracy and reliability over methods such as the COM ball-dimple technique. …

Crystallization of hydrogenated amorphous silicon (a-Si:H) films deposited on low-cost substrates shows potential for solar cell applications. Secondary ion mass spectrometry (SIMS) was used to study impurity incorporation, hydrogen evolution, and dopant diffusion during the crystallization process

As part of the work conducted in the PV Systems Reliability and Performance R&D Task, a 1.5-kWdc photovoltaic (PV) array consisting of 36 Solarex MST-43MV dual-junction a-Si modules was installed and its performance monitored for almost six years (September 1999 through May 2005) at the National Renewable Energy Laboratory (NREL) Outdoor Test Facility (OTF). This paper describes the system and its performance based on the PV for Utility-Scale Applications (PVUSA) power rating method.

We present a digest of our research on the thin-film material components that comprise the top and bottom cells of three different material systems and the tandem devices constructed from them.

Higher-efficiency solar cells improve the likelihood that concentrator photovoltaic systems will become cost effective. A four-junction GaAs- and Ge-based solar cell incorporating a 1-eV bandgap material has an ideal AM0 efficiency of ~40% and could also be used in a terrestrial concentrator module. The dilute-N GaAsN alloy's bandgap can be reduced to near 1 eV when the nitrogen content is 2% - 3%. Indium can also be added to the alloy to improve lattice matching to GaAs and Ge. We have used deep-level transient spectroscopy (DLTS) to characterize traps in both p-type and n-type GaAsN. For each type of material, the dominant DLTS signal corresponds to an electron trap having an activation energy of about 0.35 eV for p-type GaAsN and about 0.45 eV for n-type GaAsN. In both types of materials, the trap concentrations, modified by ..lambda..-effect factors, increase with both increasing N content and increased doping.

Using first-principles density-functional theory calculations, we show that the anomalously large anisotropy of {sigma}-plutonium is a consequence of greatly varying bond-strengths between the 12 nearest neighbors. Employing the calculated bond strengths, we expand the tenants of classical crystallography by incorporating anisotropy of chemical bonds, which yields a structure with the monoclinic space group Cm for {delta}-plutonium rather than face-centered cubic Fm{bar 3}m. The reduced space group for {delta}-plutonium enlightens why the ground state of the metal is monoclinic, why distortions of the metal are viable, and has considerable implications for the behavior of the material as it ages. These results illustrate how an expansion of classical crystallography that accounts for anisotropic electronic structure can explain complicated materials in a novel way.

A family of prototype ..pi..-conjugated dendrimers has been synthesized and incorporated into solution-processable organic photovoltaic (OPV) devices. Bulk heterojunction devices were fabricated by blending the dendrimers with a solubilized fullerene. The best of these initial devices, which were not optimized for morphology, exhibited external quantum efficiencies of 22% at peak wavelength. It was found that 3-arm dendrimers, when sufficiently soluble, yielded higher photocurrents than their 4-arm counterparts. This was attributed to better planarity and intermolecular alignment of the 3-arm version. Device efficiency was seen to increase with increasing arm length. A reduced-band gap dendrimer was synthesized by attaching electron-withdrawing groups onto the core to yield an optical band gap of 1.82 eV.

The rapid identification of contaminant plume sources and their characteristics in urban environments can greatly enhance emergency response efforts. Source identification based on downwind concentration measurements is complicated by the presence of building obstacles that can cause flow diversion and entrainment. While high-resolution computational fluid dynamics (CFD) simulations are available for predicting plume evolution in complex urban geometries, such simulations require large computational effort. We make use of an urban puff model, the Defence Science Technology Laboratory's (Dstl) Urban Dispersion Model (UDM), which employs empirically based puff splitting techniques. UDM enables rapid urban dispersion simulations by combining traditional Gaussian puff modeling with empirically deduced mixing and entrainment approximations. Here we demonstrate the preliminary reconstruction of an atmospheric release event using stochastic sampling algorithms and Bayesian inference together with the rapid UDM urban puff model based on point measurements of concentration. We consider source inversions for both a prototype isolated building and for observations and flow conditions taken during the Joint URBAN 2003 field campaign at Oklahoma City. The Markov Chain Monte Carlo (MCMC) stochastic sampling method is used to determine likely source term parameters and considers both measurement and forward model errors. It should be noted that the stochastic methodology …

The peak-watt rating is a primary indicator of PV performance. The peak power rating is the maximum electrical power that is produced when the PV device is continuously illuminated at 1000 Wm/sup-2/ total irradiance under International Electrotechnical Commission Standard 60904-2 reference spectrum, and 25 deg C cell temperature. Most manufacturers trace their peak-watt rating through calibrations performed at recognized terrestrial calibration facilities. Manufacturers typically perform intercomparisons among a set of their modules internally with other plants and among. Sometimes they have the same module measured at different calibration facilities to determine the differences in calibration. This intercomparison was to mimic this procedure and supply new thin film samples along with samples that could pose other problems. These intercomparisons sample the laboratories' everyday procedures better than a formal intercomparison where the laboratories' best procedures and data scrutiny are used.

None

This paper presents two new strategies to speed up connectedcomponent labeling algorithms. The first strategy employs a decisiontreeto minimize the work performed in the scanning phase of connectedcomponent labeling algorithms. The second strategy uses a simplifiedunion-find data structure to represent the equivalence information amongthe labels. For 8-connected components in atwo-dimensional (2D) image,the first strategy reduces the number of neighboring pixels visited from4 to7/3 on average. In various tests, using a decision tree decreases thescanning time by a factor of about 2. The second strategy uses a compactrepresentation of the union-find data structure. This strategysignificantly speeds up the labeling algorithms. We prove analyticallythat a labeling algorithm with our simplified union-find structure hasthe same optimal theoretical time complexity as do the best labelingalgorithms. By extensive experimental measurements, we confirm theexpected performance characteristics of the new labeling algorithms anddemonstrate that they are faster than other optimal labelingalgorithms.

Coupling efficiency, the ratio of the capsule absorbed energy to the driver energy, is a key parameter in ignition targets. The hohlraum originally proposed for NIF coupled {approx}11% of the absorbed laser energy to the capsule as x-rays. We describe here a second generation of hohlraum target which has higher coupling efficiency, {approx}16%. Because the ignition capsule's ability to withstand 3D effects increases rapidly with absorbed energy, the additional energy can significantly increase the likelihood of ignition. The new target includes laser entrance hole (LEH) shields as a principal method for increasing coupling efficiency while controlling symmetry in indirect-drive ICF. The LEH shields are high Z disks placed inside the hohlraum to block the capsule's view of the cold LEHs. The LEH shields can reduce the amount of laser energy required to drive a target to a given temperature via two mechanisms: (1) keeping the temperature high near the capsule pole by putting a barrier between the capsule and the pole, (2) because the capsule pole does not have a view of the cold LEHs, good symmetry requires a shorter hohlraum with less wall area. Current integrated simulations of this class of target couple 140 kJ of x-rays to a …

While the purpose of geologic storage in deep saline formations is to trap greenhouse gases underground, the potential exists for CO{sub 2} to escape from the target reservoir, migrate upward along permeable pathways, and discharge at the land surface. In this paper, we evaluate the potential for such CO{sub 2} discharges based on the analysis of natural analogs, where large releases of gas have been observed. We are particularly interested in circumstances that could generate sudden, possibly self-enhancing release events. The probability for such events may be low, but the circumstances under which they occur and the potential consequences need to be evaluated in order to design appropriate site-selection and risk-management strategies. Numerical modeling of hypothetical test cases is suggested to determine critical conditions for large CO{sub 2} releases, to evaluate whether such conditions may be possible at designated storage sites, and, if applicable, to evaluate the potential impacts of such events as well as design appropriate mitigation strategies.

We performed a sequence of tests on a partiallywater-saturated sand sample contained in an x-ray transparent aluminumpressure vessel that is conducive to x-ray computed tomography (CT)observation. These tests were performed to gather data for estimation ofthermal properties of the sand/water/gas system and thesand/hydrate/water/gas systems, as well as data to evaluate the kineticnature of hydrate dissociation. The tests included mild thermalperturbations for the estimation of the thermal properties of thesand/water/gas system, hydrate formation, thermal perturbations withhydrate in the stability zone, hydrate dissociation through thermalstimulation, additional hydrate formation, and hydrate dissociationthrough depressurization with thermal stimulation. Density changesthroughout the sample were observed as a result of hydrate formation anddissociation, and these processes induced capillary pressure changes thataltered local water saturation.

The {alpha} to {beta} transition in pure Ti occurs mainly by a 'martensitic type' phase transformation. In such transformations, growth rates and interface velocities tend to be very large, on the order of 10{sup 3} m/s, making it difficult to observe the transformation experimentally. With thin films, it becomes even more difficult to observe, since the large surface augments the nucleation and transformation rates to levels that require nanosecond temporal resolution for experimental observations. The elucidation of the transformational mechanisms in these materials yearns for an apparatus that has both high spatial and temporal resolution. We have constructed such an instrument at LLNL (the dynamical transmission electron microscope or DTEM) that combines pulsed lasers systems and optical pump-probe techniques with a conventional TEM. We have used the DTEM to observe the transient events of the {alpha}-{beta} transformation in nanocrystalline Ti films via single shot diffraction patterns with 1.5 ns resolution. With pulsed, nanosecond laser irradiation (pump laser), the films were heated at an extreme rate of 10{sup 10} K/s. was observed At 500 ns after the initial pump laser hit, the HCP, alpha phase was almost completely transformed to the BCC, beta phase. Post-mortem investigations of the laser treated films …

High-throughput combinatorial approaches have been used for the discovery and optimization of transparent conducting oxide (TCO) materials for PV applications. We report on current investigations in In-Zn-O, In-Ti-O and In-Mo-O systems. The InZnO system is shown to be amorphous in the best conducting range with a conductivity of ~ 3000 Ω-cm-1 for 50%-70% In/Zn. The amorphous InZnO films are very smooth (2..ANG.. rms). In-Ti-O is found to be an excellent high-mobility TCO with mobilities of greater than 80 cm2/v-sec and conductivities of more than 6000 Ω-cm-1 for sputtered thin film materials.

The atomic structure and electronic properties of crystalline silicon/hydrogenated amorphous silicon (c-Si/a-Si:H) interfaces in silicon heterojunction (SHJ) solar cells are investigated by high-resolution transmission electron microscopy, atomic-resolution Z-contrast imaging, and electron energy loss spectroscopy. We find that all high-performance SHJ solar cells exhibit atomically abrupt and flat c-Si/a-Si:H interfaces and high disorder of the a-Si:H layers. These atomically abrupt and flat c-Si/a-Si:H interfaces can be realized by direct deposition of a-Si:H on c-Si substrates at a substrate temperature below 150 deg C by hot-wire chemical vapor deposition from pure silane.

The federal government is an active participant in promotingsustainable design, construction and operations and in the use of USGBC'sLeadership in Energy and Environmental Design (LEED) Green BuildingRating System. This paper presents an overview of sustainableconstruction activities in the federal sector in 2005.

The PV Systems Performance and Reliability R & D group currently has seven grid-tied 1-2 kilowatt PV systems deployed at NREL's Outdoor Test Facility (OTF) and two 6 kilowatt systems mounted on the roof of NREL's Solar Energy Research Facility (SERF). The systems, which employ several PV module technologies including crystalline silicon (c-Si), amorphous silicon (a-Si), cadmium telluride (CdTe), and copper indium diselenide (CIS), are being monitored to determine the long-term performance and reliability of the modules and arrays under actual field conditions. The length of observation ranges from 2 months for our newest system to 11 years for our oldest systems. The annual degradation and seasonal fluctuation of the systems' power output are calculated using the PV for Utility-Scale Applications (PVUSA) power rating regression model.

The 1000 MW CSP project was initiated in FY02 based on a Congressional request of the DOE to investigate the feasibility of 1000 MW of Concentrating Solar Power in the Southwest by 2006. The original charge has grown and involved a number of activities including: outreach to the SW states, support of state-level activities in NM, CA, and CO, and analysis in support of the Western Governors' Association (WGA) 30 GW Clean Energy Initiative.

The goal of the Solar Communications Team is to get the right information to the right people at the right time in the right form at the right cost, and to measure the effectiveness of projects and our strategic communications plan. Our communications efforts in FY 2005 emphasized the following: 1) Reaching the Buildings and Consumer audiences (e.g., Solar Decathlon, International Builders' Show). 2) Developing and distributing critical program documents to key stakeholders (e.g., Solar Program Review Meeting Proceedings, Industry Roadmap, second Multi-Year Program Plan). 3) Conducting a gap analysis of communications products and evaluating their effectiveness. 4) Working with our program management to streamline business processes and improve communications of management expectations. 5) Developing and maintaining content for all Solar Program Web sites that reflect research and program accomplishments. 6) Representing the interests of the Solar Program at strategic events (technical conferences, meetings, workshops, community events).

The performance of PV cells and modules with respect to standard reference conditions is a key indicator of progress of a given technology. This task provides the U.S. terrestrial PV community with the most accurate measurements that are technically possible in a timely fashion. The international module certification and accreditation program PVGap requires certification laboratories to maintain their calibration traceability path to groups like this one. The politics of a "world record" efficiency requires that an independent laboratory perform these measurements for credibility. Most manufacturers base their module peak watt rating upon standards and reference cells calibrated under this task. This task has been involved in reconciling disputes between manufacturers and their cell suppliers in terms of expected versus actual performance. This task has also served as a resource to the PV community for consultation on solar simulation, current versus voltage measurement instrumentation, measurement procedures and measurement artifacts.

In this paper, we present a three-dimensional quasistatic model for high brightness beam dynamics simulation in rf/dc photoinjectors, rf linacs, and similar devices on parallel computers. In this model, electrostatic space-charge forces within a charged particle beam are calculated self-consistently at each time step by solving the three-dimensional Poisson equation in the beam frame and then transforming back to the laboratory frame. When the beam has a large energy spread, it is divided into a number of energy bins or slices so that the space-charge forces are calculated from the contribution of each bin and summed together. Image-charge effects from conducting photocathode are also included efficiently using a shifted-Green function method. For a beam with large aspect ratio, e.g., during emission, an integrated Green function method is used to solve the three-dimensional Poisson equation. Using this model, we studied beam transport in one Linac Coherent Light Sources photoinjector design through the first traveling wave linac with initial misalignment with respect to the accelerating axis within a range of a few KeV to about 10 KeV.

The validity of omitting stability considerations when simulating transport and dispersion in the urban environment is explored using observations from the Joint URBAN 2003 field experiment and computational fluid dynamics simulations of that experiment. Four releases of sulfur hexafluoride, during two daytime and two nighttime intensive observing periods, are simulated using the building-resolving computational fluid dynamics model, FEM3MP to solve the Reynolds Averaged Navier-Stokes equations with two options of turbulence parameterizations. One option omits stability effects but has a superior turbulence parameterization using a non-linear eddy viscosity (NEV) approach, while the other considers buoyancy effects with a simple linear eddy viscosity (LEV) approach for turbulence parameterization. Model performance metrics are calculated by comparison with observed winds and tracer data in the downtown area, and with observed winds and turbulence kinetic energy (TKE) profiles at a location immediately downwind of the central business district (CBD) in the area we label as the urban shadow. Model predictions of winds, concentrations, profiles of wind speed, wind direction, and friction velocity are generally consistent with and compare reasonably well with the field observations. Simulations using the NEV turbulence parameterization generally exhibit better agreement with observations. To further explore this assumption of a neutrally-stable atmosphere …