We are investigating the interactive process between turbulent flow and dispersed phase particles. We are focusing on the mechanisms that appear to result in a reduction of local turbulent intensity and a corresponding reduction in wall heat transfer and subsequent wall erosion in turbulent solid propellant combustion flow. We apply computational simulations and physical experiments specialized to a developing free shear layer over a rearward facing step and over a parallel splitter plate. The flow configuration evolves in a two-dimensional, steady, combustion and non-combustion turbulent free shear mixing region, with and without particle additives. The computational simulations combine three basic components: gas phase Navier-Stokes solutions, Lagrange particle field solutions and a Monte Carlo technique for the random encounters, forces and accelerations between the two fields. We concentrate here on relatively large sized additive particles (of the order of tens of microns to 100 microns mean diameter). We examine their apparent influence in breaking up the larger, energy bearing eddy structures into smaller structures which are more readily dissipated.

A dipole magnet, intended as a possible alternative for the ISABELLE main-ring magnet, was designed at LBL. Three layers of FNAL Doubler/Saver conductor were used. Two 1.3-m-long models were built and tested, both with and without an iron core, and in both helium I and helium II. The training behavior, cyclic energy loss, point of quench initiation, and quench velocity were determined. A central field of 6.5 tesla was obtained in He I (4.4 K), and 7.6 tesla in He II (1.8K).

A hydrogeologic model of the Cerro Prieto geothermal field has been developed based on geophysical and lithologic well logs, downhole temperature, and well completion data from about 90 deep wells. The hot brines seem to originate in the eastern part of the field, flowing in a westward direction and rising through gaps in the shaly layers which otherwise act as partial caprocks to the geothermal resource.

The Axicell MFTF-B magnet system will provide the field environment necessary for tandem mirror plasma physics investigation with thermal barriers. The performance of the device will stimulate DT to achieve energy break-even plasma conditions. Operation will be with deuterium only. There will be 24 superconducting coils consisting of 2 sets of yin-yang pairs, 14 central-cell solenoids, 2 sets of axicell mirror-coil pairs, and 2 transition coils between the axicell mirror coil-pairs and the yin-yang coils. This paper describes the progress in the design and construction of MFTF-B Superconducting-Magnet System.

In addition to its other characteristics, the Nova Laser Fusion facility may well be the largest precision optical project ever undertaken. Moreover, during the course of construction, concurrent research and development has been successfully conducted, and has resulted in significant advances in various technical areas, including manufacturing efficiency. Although assembly of the first two beams of Nova is just commencing, the optical production, including construction of the special facilities required for many of the components, has been underway for over three years, and many phases of the optical manufacturing program for the first 10 beams will be completed within the next two years. On the other hand, new requirements for second and third harmonic generation have created the need to initiate new research and development. This work has been accomplished through the enormous cooperation DOE/LLNL has received from commercial industry on this project. In many cases, industry, where much of the optical component research and development and virtually all of the manufacturing is being done, has made substantial investment of its own funds in facilities, equipment, and research and development, in addition to those supplied by DOE/LLNL.

The next generation of accelerators for high-energy physics will require high-field, small-bore dipole magnets: in the region of 10 T and 40-mm diam. For such magnets, there is a great incentive to attain high overall current density through increasing the current density within the superconductor and minimizing the copper stabilizer. Both Nb-Ti operating at 1.8 K and Nb/sub 3/sn at 4.2 are candidate superconductors. Two programs in the US and one in Japan are directed toward the development of such magnets. The program at LBL is described below.

A new system of detectors (MPS II) which has been installed and operated in the Brookhaven National Laboratory Multiparticle Spectrometer (MPS), consisting of short drift distance drift chambers is briefly described. (WHK)

BRUTE is an algorithm to derive the implied boundary of a piecepart from the part's wireframe representation. BRUTE's input is an IGES file. The geometry is extracted and used to derive the edge-vertex (EV) topology. BRUTE then uses a divide-and-conquer method to derive all reasonable face-edge-vertex (FEV) topologies from the EV topology. The final step is to determine the geometry of each face by using the geometry of its edges. Any FEV topology that contains a face that is not a valid surface type is rejected. Valid surface types are plane, cylinder, cone, and sphere.

A Multiwire Proportional Chamber (MWPC) was used as a ..beta../sup -/ radioactivity detector in biological and medical applications. Two different kinds of experiments were performed: the study of variations in the ability of cell clones to incorporate a radioactive precursor of DNA biosynthesis (/sup 3/H-thymidine) and the regional carbohydrate consumption in myocardial tissue by means of a deposit tracer of glucose metabolism (/sup 3/H-deoxyglucose).

Some preliminary results from the MAC detector at PEP are presented. These include measurements of the angular distribution of ..gamma gamma.., ..mu mu.. and tau tau final states, a determination of the tau lifetime, a measurement of R, and a presentation of the inclusive muon p/sub perpendicular/ distribution for hadronic events.

Analytical methods for the high-temperature gas-cooled reactor (HTGR) include development, update, verification, documentation, and maintenance of all computer codes for HTGR design and analysis. This paper presents selected nuclear, structural mechanics, seismic, and systems analytical methods related to the HTGR core. This paper also reviews design verification tests in the reactor core, reactor internals, steam generator, and thermal barrier.

Fermilab's p anti p project is described, with emphasis on the anti p source. A detailed comparison is made with the design goals and accomplishments of the CERN p anti p project.

The safety characteristics of the high-temperature gas-cooled reactor (HTGR) during normal and accident conditions are determined in part by HTGR fuel performance. During normal operation, less than 0.1% fuel failure occurs, primarily from defective particles. This low fuel failure fraction limits circulating activity to acceptable levels. During severe accidents, the radiological consequence is influenced by high-temperature fuel particle behavior. An empirical fuel failure model, supported by recent experimental data, is presented. The onset of significant fuel particle failure occurs at temperatures in excess of 1600/sup 0/C, and complete fuel failure occurs at 2660/sup 0/C. This indicates that the fuel is more retentive at higher temperatures than previously assumed. The more retentive nature of the fuel coupled with the high thermal capacitance of the core results in slow release of fission products from the core during severe accidents.

This paper describes the cooldown and testing of the first yin-yang magnet for the Mirror Fusion Test Facility. The introduction describes the superconducting magnet; the rest of the paper explains the tests prior to and including magnet cooldown and final acceptance testing. The MFTF (originally MX) was proposed in 1976 and the project was funded for construction start in October 1977. Construction of the first large superconducting magnet set was completed in May 1981 and testing started shortly thereafter. The acceptance test procedures were reviewed in May 1981 and the cooldown and final acceptance test were done by the end of February 1982. During this acceptance testing the magnet achieved its full design current and field.

The technology for producing an LLNL-developed polymer, L97KVB, has been transferred to a commercial speciality silicones manufacturer, McGhan-NuSil Corporation. Workers there have demonstrated both on a small scale and on a 200 lb. scale that they can produce a polymer which meets our analytical specifications and which will also perform satisfactorily in our load deflection and compression set tests.

In recent years the emphasis in research on the magnetic mirror approach to fusion has been shifted to address what are essentially economically-motivated issues. The introduction of the Tandem Mirror idea solved in principal the problem of low Q (low fusion power gain) of mirror-based fusion systems. In order to optimize the tandem mirror idea from an economic standpoint, some important improvements have been suggested. These improvements include the thermal barrier idea of Baldwin and Logan and the axicell concept of Kesner. These new modifications introduce some special physics considerations. Among these are (1) The MHD stability properties of high energy electron components in the end cells; (2) The optimization of end-cell magnetic field configurations with the objective of minimizing equilibrium parallel currents; (3) The suppression of microstabilities by use of sloshing ion distributions. Following a brief outline of tandem mirror concepts, the above three topics are discussed, with illustrative examples taken from earlier work or from recent design studies.

The high-temperature gas-cooled reactor (HTGR) nuclear heat source components have been under design and development since the mid-1950's. Two power plants have been designed, constructed, and operated: the Peach Bottom Atomic Power Station and the Fort St. Vrain Nuclear Generating Station. Recently, development has focused on the primary system components for a 2240-MW(t) steam cycle HTGR capable of generating about 900 MW(e) electric power or alternately producing high-grade steam and cogenerating electric power. These components include the steam generators, core auxiliary heat exchangers, primary and auxiliary circulators, reactor internals, and thermal barrier system. A discussion of the design and operating experience of these components is included.

Several methods for imaging using accelerated heavy ion beams are being investigated at Lawrence Berkeley Laboratory. Using the HILAC (Heavy-Ion Linear Accelerator) as an injector, the Bevalac can accelerate fully stripped atomic nuclei from carbon (Z = 6) to krypton (Z = 34), and partly stripped ions up to uranium (Z = 92). Radiographic studies to date have been conducted with helium (from 184-inch cyclotron), carbon, oxygen, and neon beams. Useful ranges in tissue of 40 cm or more are available. To investigate the potential of heavy-ion projection radiography and computed tomography (CT), several methods and instrumentation have been studied.

The coupling of a high-temperature gas-cooled reactor (HTGR) and a chemical process facility has the potential for long-term synthetic fuel production (i.e., oil, gasoline, aviation fuel, hydrogen, etc) using coal as the carbon source. Studies are in progress to exploit the high-temperature capability of an advanced HTGR variant for nuclear process heat. The process heat plant discussed in this paper has a 1170-MW(t) reactor as the heat source and the concept is based on indirect reforming, i.e., the high-temperature nuclear thermal energy is transported (via an intermediate heat exchanger (IHX)) to the externally located process plant by a secondary helium transport loop. Emphasis is placed on design considerations for the major nuclear heat source (NHS) components, and discussions are presented for the reactor core, prestressed concrete reactor vessel (PCRV), rotating machinery, and heat exchangers.

Bunched beams of 100 and 150 GeV have been stored in the Fermilab Main Ring for periods of up to one hour. The observations of beam current and beam profiles are analyzed for the effects of gas scattering, chromaticity and non-linear magnetic field.

The high-temperature heat available from the High-Temperature Gas-Cooled Reactor (HTGR) makes it suitable for many process applications. One of these applications is a large-scale energy production plant where nuclear energy is converted into chemical energy and stored for industrial or utility applications. This concept combines presently available nuclear HTGR technology and energy conversion chemical technology. The design of this complex plant involves questions of interacting plant dynamics and overall plant control. This paper discusses how these questions were answered with the aid of a hybrid computer model that was developed within the time-frame of the conceptual design studies. A brief discussion is given of the generally good operability shown for the plant and of the specific potential problems and their anticipated solution. The paper stresses the advantages of providing this information in the earliest conceptual phases of the design.

Research on the effect of composition on the cryogenic mechanical properties of high-Mn austenitic steels showed that both the yield strength and change of strength with alloy processing increased significantly with increasing interstitial content. Alloy toughness deteriorated if carbon content was raised to 0.1% or higher or if delta-ferrite was retained in the as-cooled alloy. On the basis of these investigations an alloy of nominal composition 18Mn-5Ni-16Cr-0.024C-0.22 N was made and tested at 4K. Both its strength-toughness characteristic and fatigue crack growth properties compared favorably to those of 304LN and 304N cryogenic steels.

The fluorocarbon absorption process for krypton and xenon removal from dissolver off-gas is based on exploitation of solubility differences which exist among noble gases and other gas-phase constituents in the fluorocarbon solvent dichlorofluoromethane (refrigerant-12). Process performance and reliability have been demonstrated on an engineering scale with over 10 years of pilot plant operation, including testing with /sup 85/Kr, /sup 133/Xe, and /sup 131/I. The culmination of this work is a single-column design which results in a simplified process with improved reliability and lower cost. Data are presented summarizing recent single-column development activities. These include data plots depicting decontamination factor vs feed gas flow rate, DF vs process absorption factor (kG/L), and location of the concentration peak via the solvent flow rate. In general, 99% removal is easily obtainable for Kr, Xe, and CO/sub 2/ while attaining concentration factors on the order of 10/sup 3/ to 10/sup 4/. Further concentration of the Kr product is investigated using solid sorbent and cold trapping technologies. Effective removal of entrained fluorocarbon solvent and CO/sub 2/ from the single-column product stream is demonstrated using 13X and 5A molecular sieves, respectively. Additional separation of Xe is studied using a silver mordenite bed and compared to existing …

Diagrams and slide reproductions of the system are presented; and performance, maintenance, and cost information is outlined. (WHK)