The purpose of this workshop was to develop technical background facts necessary for planning continued research and development of Enhanced Geothermal Systems (EGS). EGS are geothermal reservoirs that require improvement of their permeability or fluid contents in order to achieve economic energy production. The initial focus of this R&D program is devising and testing means to extract additional economic energy from marginal volumes of hydrothermal reservoirs that are already producing commercial energy. By mid-1999, the evolution of the EGS R&D Program, begun in FY 1988 by the U.S. Department of Energy (DOE), reached the stage where considerable expertise had to be brought to bear on what technical goals should be pursued. The main purpose of this Workshop was to do that. The Workshop was sponsored by the Office of Geothermal Technologies of the Department of Energy. Its purpose and timing were endorsed by the EGS National Coordinating Committee, through which the EGS R&D Program receives guidance from members of the U.S. geothermal industry. Section 1.0 of this report documents the EGS R&D Program Review Session. There, managers and researchers described the goals and activities of the program. Recent experience with injection at The Geysers and analysis of downhole conditions at …

Ethane oxidation reactions were studied over pure and Ca-, Mg-, Sr-, La-, Nd-, and Y-substituted BaCeO{sub 3} perovskites under oxygen limited conditions. Several of the materials, notably the Ca- and Y-substituted materials, show activity for complete oxidation of the hydrocarbon to CO{sub 2} at temperatures below 650 C. At higher temperatures, the oxidative dehydrogenation (ODH) to ethylene becomes significant. Conversions and ethylene yields are enhanced by the perovskites above the thermal reaction in our system in some cases. The perovskite structure is not retained in the high temperature reaction environment. Rather, a mixture of carbonates and oxides is formed. Loss of the perovskite structure correlates with a loss of activity and selectivity to ethylene.

There is a growing interest in understanding the potential consequences of malevolent acts against shipments of nuclear waste and/or material. Recently, Sandia National Laboratories (SNL) conducted a study' to evaluate the potential source terms available for release in a sabotage event for spent fuel shipments. Using these source terms, we developed an approach to assess the potential radiological consequences of the hypothesized events and to compare them to consequences of transportation accidents involving the same types of shipments. Our analysis showed that there could be orders of magnitude differences in consequence for urban, suburban, and rural events. Sabotage consequences could be orders of magnitude higher than those of transportation accidents with a probability of 10{sup {minus}12} or higher and be similar to events with a probability less than 10{sup {minus}12}. Also, explosive-induced buoyancy would disperse the source further out than a non-buoyant release in a transportation accident, which, therefore, would have a higher dose near the release point.

We use the gradient of the energy-integrated angle resolved photoemission (ARPES) intensity in order to define precisely the Fermi surface (FS) in BSCCO superconductors. We show that, independent of the photon energy, the FS is a hole barrel centered at ({pi},{pi}), Then, the superconducting gap along the FS is precisely determined from ARPES measurements on over-doped and underdoped samples of Bi2212. As the doping decreases, the maximum gap increases, but the slope of the gap near the nodes decreases. Though consistent with d-wave symmetry, the gap with underdoping cannot be fit by the simple cos(k{sub x})-cos(k{sub y}) form. A comparison of our ARPES results with available penetration depth data indicates that the renormalization of the linear T suppression of the superfluid density at low temperatures due to quasiparticle excitations around the d-wave nodes is large and doping dependent.

When x-rays from a synchrotron source are absorbed in a liquid, the x-ray energy (E{sub x}) is converted by the photoelectric effect into the kinetic energy of the electrons released. For hydrocarbons, absorption by the K-electrons of carbon dominates. Thus the energy of the photoelectron (E{sub pe}) is E{sub x}-E{sub b}, where E{sub b} is the K-shell binding energy of carbon. Additional electrons with energy equal to E{sub b} is released in the Auger process that fills the hole in the K-shell. These energetic electrons will produce many ionizations, excitations and products. The consequences of the high density of ionizations and excitations along the track of the photoelectron and special effects near the K-edge are examined here.

Ball- and roller-bearings of the 21st Century are expected to perform better and last longer while operating under more stringent conditions than before. To meet these great expectations, researchers have been constantly exploring new bearing designs or refining existing ones, optimizing microstructure and chemistry of bearing materials, and alternatively, they have been considering the use of thin hard coatings for improved bearing performance and durability. Already, some laboratory tests have demonstrated that hard nitride, carbide (such as TiN, TiC, etc.) and diamondlike carbon (DLC) coatings can be very effective in prolonging the fatigue lives of bearing steels. This paper provides an overview of the recent developments in hard coatings for bearing applications. Previous studies have demonstrated that thin, hard coatings can effectively prolong the fatigue lives of bearing steel substrates. In particular, thinner hard coatings (i.e., 0.2 - 1 {micro}m thick) provide exceptional improvements in the fatigue lives of bearing steel substrates. In contrast, thicker hard coatings suffer micro fracture and delamination when tested under high contact stresses, hence are ineffective and may even have a negative effect on bearing life. Overall, it was concluded that thin hard coatings may offer new possibilities for bearing industry in meeting the performance …

As the human population of Earth continues to expand and to demand an ever-higher quality-of-life, requirements for ever-greater knowledge--and then control--of the future of the state of the terrestrial biosphere grow apace. Convenience of living--and, indeed, reliability of life itself--become ever more highly ''tuned'' to the future physical condition of the biosphere being knowable and not markedly different than the present one, Two years ago, we reported at a quantitative albeit conceptual level on technical ways-and-means of forestalling large-scale changes in the present climate, employing practical means of modulating insolation and/or the Earth's mean albedo. Last year, we reported on early work aimed at developing means for creating detailed, high-fidelity, all-Earth weather forecasts of two weeks duration, exploiting recent and anticipated advances in extremely high-performance digital computing and in atmosphere-observing Earth satellites bearing high-technology instrumentation. This year, we report on recent progress in both of these areas of endeavor. Preventing the commencement of large-scale changes in the current climate presently appears to be a considerably more interesting prospect than initially realized, as modest insolation reductions are model-predicted to offset the anticipated impacts of ''global warming'' surprisingly precisely, in both space and time. Also, continued study has not revealed any fundamental …