AerMet 100 is a high strength, high fracture toughness alloy designed for use in aerospace applications. In previous work the welding behavior of this alloy has been evaluated, and it has been shown that a softened region in the heat-affected zone (HAZ) is a principal feature of the weld zone. A model for this softening, based on classical theories of precipitate coarsening and isothermal softening data, was developed and found to provide a reasonable description for weld thermal cycle simulation (Gleeble) experiments. Recent work has shown, however, that softening in real welds is not always well predicted by this model, so that additional effects, which are not captured in conventional Gleeble thermal cycle simulations must be addressed. In particular, the stresses associated with real weld HAZ's may modify the softening kinetics. In the current work, Gleeble simulations in both stress-free and stressed conditions have been conducted and the kinetics compared. The accuracy of the thermal model predictions have also been considered regarding their impact on estimated hardness values.

Structure within thin epoxy films is investigated by neutron reflectivity (NR) as a function of resin/crosslinker composition and cure temperature. Variation in the crosslink density normal to the substrate surface is examined by swelling the films with the good solvent d-nitrobenzene (d-NB). The principle observation is a large excess of d-NB near the air surface. This is not a wetting layer,but rather indicates a lower crosslink density in the new-surface region. This effect is due to preferential segregation of the crosslinker to the air surface, driven by the lower surface energy of the crosslinker relative to the epoxide oligamers. The magnitude of the effect is a function of composition and cure temperature. Exclusion of d-N13from the region immediately adjacent to the substrate surface is also observed, possibly indicating a tightly bound layer of epoxy. Regarding swelling in the bulk of the films, the behavior is non-symmetric with departure from the stoichiometric ratio. The films deficient in curing agent show greater equilibrium swelling and faster swelling kinetics than the films with an excess of curing agent.

Exponential-13,6 (EXP-13,6) potential pammeters for 750 gases composed of 48 elements were determined and assembled in a database, referred to as the JCZS database, for use with the Jacobs Cowperthwaite Zwisler equation of state (JCZ3-EOS)~l) The EXP- 13,6 force constants were obtained by using literature values of Lennard-Jones (LJ) potential functions, by using corresponding states (CS) theory, by matching pure liquid shock Hugoniot data, and by using molecular volume to determine the approach radii with the well depth estimated from high-pressure isen- tropes. The JCZS database was used to accurately predict detonation velocity, pressure, and temperature for 50 dif- 3 Accurate predictions were also ferent explosives with initial densities ranging from 0.25 glcm3 to 1.97 g/cm . obtained for pure liquid shock Hugoniots, static properties of nitrogen, and gas detonations at high initial pressures.

This presentation briefly outlines a cleanup program at a Rocky Flats site through viewgraphs and an executive summary. Exposure pathway analyses to be performed are identified, and decontamination levels are listed for open space and office worker exposure areas. The executive summary very briefly describes the technical approach, RESRAD computer code to be used for analyses, recommendations for exposure levels, and application of action levels to multiple radionuclide contamination. Determination of action levels for surface and subsurface soils, based on radiation doses, is discussed. 1 tab.

We review the derivation of moment equations which include the effects of space charge and dispersion in bends first presented in ref [1]. These equations generalize the familiar envelope equations to include the dispersive effects of bends. We review the application of these equations to the calculation of the change in emittance resulting from a sharp transition from a straight section to a bend section, using an energy conservation constraint. Comparisons of detailed 2D and 3D simulations of intense beams in rings using the WARP code (refs [2,3]) are made with results obtained from the moment equations. We also compare the analysis carried out in ref [1], to more recent analyses, refs [4,5]. We further examine self-consistent distributions of beams in bends and discuss the relevance of these distributions to the moment equation formulation.

Field emission cathodes (FECs) with characteristics of cold emission, low voltage operation, high current density and microscopic size meet the requirements for an electron source for use in vacuum microelectronics. Deposition efforts have focused on evaporation techniques, as electron beam, to produce the size and shape of cathode required for efficient operation. After two decades of development, the convention for FEC synthesis involves coating with very high tolerances for thickness uniformity using a planetary substrate fixture and a long source-to-substrate distance. A further reduction in the operating voltage results by increasing the density of emitters through a reduction of cathode size and spacing. In addition, the objective of scaling the substrate size from small to large areas has compounded the manufacturing requirements to a point beyond that which is obtainable through modifications to the conventional FEC deposition process. We have been successful in a new alternative approach to design, assemble and operate a system that enables FEC synthesis over large areas through the control of deposition source divergence and step-and-repeat substrate handling.

The laser and plasma conditions expected in ignition experiments using indirect drive inertial confinement have been studied experimentally. It has been shown that there are at least three ways in which ion waves can be stimulated in these plasmas and have significant effect on the energy balance and distribution in the target. First ion waves can be stimulated by a single laser beam by the process of Stimulated Brillouin Scattering (SBS) in which an ion acoustic and a scattered electromagnetic wave grow from noise. Second, in a plasma where more than one beam intersect, ion waves can Lie excited at the `beat` frequency and wave number of the intersecting beams,, causing the side scatter instability to be seeded, and substantial energy to be transferred between the beams [R. K. Kirkwood et. al. Phys. Rev. Lett. 76, 2065 (1996)]. And third, ion waves may be stimulated by the decay of electron plasma waves produced by Stimulated Raman Scattering (SRS), thereby inhibiting the SRS process [R. K. Kirkwood et. al. Phys. Rev. Lett. 77, 2706 (1996)].

Infrared computed tomography (IRCT) is a promising, non-contact, nondestructive evaluation tool used to inspect the mechanical integrity of large structures. We describe on-site, proof-of-principle demonstrations of IRCt to inspect defective metallic and composite structures. The IRCT system captures time sequences of heat-stimulated, dual-band infrared (DBIR) thermal maps for flash-heated and naturally-heated targets. Our VIEW algorithms produce co-registered thermal, thermal inertia, and thermal-timegram maps from which we quantify the percent metal-loss corrosion damage for airframes and the defect sites, depths, and host-material physical properties for composite structures. The IRCT method clarifies the type of defect, e.g., corrosion, fabrication, foreign-material insert, delamination, unbond, void, and quantifies the amount of damage from the defect, e.g., the percent metal-loss from corrosion in metal structures, the depth, thickness, and areal extent of heat damage in multi-layered composite materials. Potential long-term benefits of IRCT technology are in-service monitoring of incipient corrosion damage, to avoid catastrophic failure and production-monitoring of cure states for composite materials.

The depolymerization of organosolv-derived lignins by bases in methanol or ethanol solvent was studied in rapidly heated batch microreactors. The conversion of lignin to ether solubles by KOH in methanol or ethanol was rapid at 290 "C, reaching the maximum value within 10-15 minutes. An excess of base relative to Lignin monomer units was required for maximum conversion. Strong bases (KOH, NaOH, CSOH) convert more of the lignin to ether soluble material than do weaker bases LiOH, Ca(OH)2, and NacCO2). Ethanol and methanol are converted to acetic and formic acid respectively under the reaction conditions with an activation energy of approximately 50 kcal/mol. This results in a loss of solvent, but more importantly neutralizes the base catalyst, halting forward progress of the reaction.

This paper presents a graph based approach to network vulnerability analysis. The method is flexible, allowing analysis of attacks from both outside and inside the network. It can analyze risks to a specific network asset, or examine the universe of possible consequences following a successful attack. The analysis system requires as input a database of common attacks, broken into atomic steps, specific network configuration and topology information, and an attacker profile. The attack information is matched with the network configuration information and an attacker profile to create a superset attack graph. Nodes identify a stage of attack, for example the class of machines the attacker has accessed and the user privilege level he or she has compromised. The arcs in the attack graph represent attacks or stages of attacks. By assigning probabilities of success on the arcs or costs representing level of effort for the attacker, various graph algorithms such as shortest path algorithms can identify the attack paths with the highest probability of success.

A single scatter electron Monte Carlo code (SSMC), CREEP, has been written which bridges the gap between existing transport methods and modeling real physical processes. CREEP simulates ionization,elastic and bremsstrahlung events individually. Excitation events are usually treated with an excitation-only stopping power, although simulation of individual excitation events is possible. Agreement of these quantities with experimental values is generally quite good.One application of this code is the generation of probability distribution functions (PDFs) to describe the phase space of a single electron emerging from a sphere of a given material and radius. A library of data sets for such spheres (or ``kugels``) is being computed for a variety of incident energies, material types, and sizes. The final goal of this work is to achieve extremely accurate transport results with an efficiency that is similar to that of condensed history methods.

Intense laser (> 10{sup 21} W/cm{sup 2}) driven hard x-ray sources offer a new alternative to conventional electron accelerator bremsstrahlung sources. These laser driven sources offer considerable simplicity in design and cost advantage for multiple axis views and have the potential for much higher spatial and temporal resolution than is achievable with accelerator sources We have begun a series of experiments using the Petawatt Laser system at LLNL to determine the potential of these sources for radiography applications Absolutely calibrated spectra extending to 20 MeV and high resolution radiographs through a {rho}r{>=}150 gm/cm{sup 2} have been obtained The physics of these sources and the scaling relationships and laser technology required to provide the dose levels necessary for radiography applications will be discussed Diagnostics of the laser produced electrons and photons will be addressed

In estimating the frequency of an aircraft crashing into a facility, it has been found convenient to break the problem down into two broad categories. One category estimates the aircraft crash frequency due to air traffic from nearby airports, the so-called near-airport environment. The other category estimates the aircraft crash frequency onto facilities due to air traffic from airways, jet routes, and other traffic flying outside the near-airport environment The total aircraft crash frequency is the summation of the crash frequencies from each airport near the facility under evaluation and from all airways, jet routes, and other traffic near the facility of interest. This paper will examine the problems associated with the determining the aircraft crash frequencies onto facilities outside the near-airport environment. This paper will further concentrate on the estimating the risk of aircraft crashes to ground facilities due to high altitude air carrier and air taxi traffic. High altitude air carrier and air taxi traffic will be defined as all air carrier and air taxi flights above 18,000 feet Mean Sea Level (MSL).

In this paper the author first sketches the calculation of the pressure of a neutral, ion-electron gas as an expansion in powers of the electron charge, e, by means of the Matsubara, finite-temperature, many-body, perturbation theory. He then goes on to derive the Debye-H{umlt u} term and other equations to support his contentions. His results support but do not prove the existence of a phase transition.

The goals are to improve performance and reduce costs; the variables tested are fuel fabrication and assembly tolerances and cladding materials. Significant results are: goal lifetimes achieved; D9/HT9 alloys superior--reduced swelling potential duct mechanical attachment methods viable; test performance per design predictions.

Following revisions to the Tri-Party Agreement for Hanford Site cleanup, which specified vitrification for Complete melter feasibility and system operability immobilization of the low-level waste (LLW) tests, select reference melter(s), and establish reference derived from retrieval and pretreatment of the radioactive LLW glass formulation that meets complete systems defense wastes stored in 177 underground tanks, commercial requirements (June 1996). Available melter technologies were tested during 1994 to 1995 as part of a multiphase program to select reference Submit conceptual design and initiate definitive design technologies for the new LLW vitrification mission.

This method provides a structured and cost-oriented way to determine risks associated with loss and destruction of industrial security interests consisting of material assets and human resources. Loss and destruction are assumed to be adversary perpetrated, high-impact events in which the health and safety of people or high-value property is at risk. This concept provides a process for: (1) assessing effectiveness of all integrated protection system, which includes facility operations, safety, emergency and security systems, and (2) a qualitative prioritization scheme to determine the level of consequence relative to cost and subsequent risk. The method allows managers the flexibility to establish asset protection appropriate to programmatic requirements and priorities and to decide if funding is appropriate. The evaluation objectives are to: (1) provide for a systematic, qualitative tabletop process to estimate the potential for an undesirable event and its impact; and (2) identify ineffective protection and cost-effective solutions.

Synthetic Aperture Radars are coherent imaging systems that produce complex-valued images of the ground. Because modern systems can generate large amounts of data, there is substantial interest in applying image compression techniques to these products. In this paper, we examine the properties of complex-valued SAR images relevant to the task of data compression. We advocate the use of transform-based compression methods but employ radically different quantization strategies than those commonly used for incoherent optical images. The theory, methodology, and examples are presented.

FFTF was originally designed/constructed/operated to develop LMFBR fuels and materials. Inherent safety became a major focus of the US nuclear industry in the mid 1980`s. The inherent safety characteristics of LMFBRs were recognized but additional enhancement was desired. The presentation contents are: Fast Flux Test Facility history and status; Overview of contract activities; Summary of loss of flow without scram with GEMs testing; and Summary of pump start with GEMs testing.

Since 1994 a group of High Energy Physicists and Computer Scientists have been collaborating on HEPVis, a library of 2-D and 3-D shapes for detector visualization and HEP analysis. Based on the Open Inventor (1) toolkit, HEPVis has grown into an international collaboration since its inception in 1994. This paper describes the library, its history, and its future. Images from HEP applications that use the library are also included.

This paper makes a case for the use of participatory ergonomics by and for ergonomists. A strategy for using participatory ergonomics in a conference workshop format is described. The process could be used as a tool for issues of common concern among ergonomists. it would also offer an experience of the participatory ergonomics process. An example workshop on quantifying costs and benefits of ergonomics is discussed.

We are in the process of developing and building a laser system as the first in a series of a new generation of diode-pumped solid-state Inertial Confinement Fusion (ICF) lasers at LLNL (see Fig. 1 below). This laser system named �Mercury� will be the first integrated demonstration of a scalable laser architecture compatible with advanced high energy density (HED) physics applications. Primary performance goals include 10% efficiencies at 10 Hz and a 1- 10 ns pulse with lo energies of 100 J and with 2(omega)J/3(omega) frequency conversion.

Cleaning up and disposing of approximately 50 years of nuclear waste is the main mission at the U.S. Department of Energy`s Hanford Nuclear Reservation, located in the southeastern part of the state of Washington. A major element of the total cleanup effort involves retrieving, processing, and disposing of radioactive and hazardous waste stored in 177 underground storage tanks. This effort, referred to as the Tank Waste Remediation System (TWRS), is expected to cost billions of dollars and take approximately 25 years to complete. Several computer simulations of this project are being created, focusing on both programmatic and detailed engineering issues. This paper describes one such simulation activity, using the ithink(TM)computer simulation software. The ithink(TM) simulation includes a representation of the complete TWRS cleanup system, from retrieval of waste through intermediate processing and final vitrification of waste for disposal. Major issues addressed to date by the simulation effort include the need for new underground storage tanks to support TWRS activities, and the estimated design capacities for various processing facilities that are required to support legally mandated program commitment dates. This paper discusses how the simulation was used to investigate these questions.

Mechanical properties of 1950's vintage, A285 Grade B carbon steels have been compiled for elastic-plastic fracture mechanics analysis of storage tanks (Lam and Sindelar, 1999). The properties are from standard Charpy V-notch (CVN), 0.4T planform Compact Tension (C(T)), and Tensile (T) specimens machined from archival steel from large water piping. The piping and storage tanks were constructed in the 1950s from semi-killed, hot-rolled carbon steel plate specified as A285 Grade B. Evaluation of potential aging mechanisms at both service conditions shows no loss in fracture resistance of the steel in either case.Site and literature data show that the A285, Grade B steel, at and above approximately 70 degrees Fahrenheit, is in the upper transition to upper shelf region for absorbed energy and is not subject to cleavage cracking or a brittle fracture mode. Furthermore, the tank sidewalls are 1/2 or 5/8-inch thick, and therefore, the J-resistance (JR) curve that characterizes material resistance to stable crack extension under elastic-plastic deformation best defines the material fracture toughness. The JR curves for several heats of A285, Grade B steel tested at 40 degrees Fahrenheit, a temperature near the average ductile-to-brittle (DBTT) transition temperature (CVN {at} 15 ft-lb), are presented. This data is applicable …