Westinghouse Savannah River Company, Idaho National Engineering Laboratory, and Wyle Laboratory cooperated in a series of single- and two-component calibration tests conducted to obtain sufficient information for calibrating flowmeters, to observe flow patterns, and to estimate void functions. Testing, conducted in large-diameter horizontal pipe, covered total flows of 0.19 to 1.89 m{sup 3}/s (3000 to 30000 gpm) and inlet void fractions up to 40%. A flow regime map, constructed using video images of the flow patterns and void fraction data, was compared with maps from the literature, with generally good agreement for interpretation of flow patterns. 5 refs.

A review of microscopic optical model potentials used in the analysis of neutron scattering and analyzing power data below 100 MeV (5 {le}E{sub n}{le}100 MeV) is presented. The quality of the fits to the data over a wide massd ({sup 6}Li-{sup 239}Pu) and energy range is discussed. It is shown that reasonably good agreement with the data is obtained with only three parameters, {lambda}{sub V}, {lambda}{sub W}, and {lambda}{sub SO}, which show a smooth mass and energy dependence. These parameters are normalizing constants to the real (V), and imaginary (W) central potentials and the real spin-orbit (V{sub SO}) potential. 14 refs., 7 figs.

The Virasoro master equation collects all possible Virasoro constructions which are quadratic in the currents of affine Lie g. The solution space of this system is immense, with generically irrational central charge, and solutions which have so far been observed are generically unitary. Other developments reviewed include the exact C-function, the superconformal master equation and partial classification of solutions by graph theory and generalized graph theories. 37 refs., 1 fig., 1 tab.

The preliminary results of an ongoing investigation of Fe/Cu(001) are presented here. Energy dependent photoelectron diffraction, including the spin-dependent variant using the multiplet split Fe3s state, is being used to investigate the nanoscale structures formed by near-monolayer deposits of Fe onto Cu(001). Core-level photoemission from the Fe3p and Fe3s states has been generated using synchrotron radiation as the tunable excitation source. Tentatively, a comparison of the experimental Fe3p cross section measurements with multiple scattering calculations indicates that the Fe is in a fourfold hollow site with a spacing of 3.6{Angstrom} between it and the atom directly beneath it, in the third layer. This is consistent with an FCC structure. The possibility of utilizing spin-dependent photoelectron diffraction to investigate magnetic ultrathin films will be demonstrated, using our preliminary spectra of the multiplet-split Fe3s os near-monolayer Fe/Cu(001). 18 refs., 10 figs.

An introduction to the techniques of analysis of hadron collider events is presented in the context of the quark-parton model. Production and decay of W and Z intermediate vector bosons are used as examples. The structure of the Electroweak theory is outlined. Three simple FORTRAN programs are introduced, to illustrate Monte Carlo calculation techniques. 25 refs.

This paper contains information information on: accelerator and detector; QCD studies; studies of the electroweak force; The search for the top quark; {beta} physics at hadron colliders; and the search for exotic objects and prospects for the future.

The impact of the nuclear equation of state on the properties of rotating neutron stars from two different sources, stable rotation at the general relativistic Kepler period and rotation at the gravitational radiation-reaction driven instability mode, is analyzed. For this purpose models of rotating neutron stars are constructed in the framework of Einstein's theory of general relativity by applying a refined version of Hartle's perturbative stellar structure equations. The investigation is based on a representative collection of a total of seventeen nuclear equations of state, covering both non-relativistic as well as relativistic ones. 41 refs., 3 figs., 2 tabs.

Plasmas produced by irradiating massive carbon targets with a 1.064 {mu}m, 1.5 ns laser pulse at incident energies of {approximately}100 J have been investigated. UV thermal Thomson scattering was used to obtain the electron and ion temperatures, as well as drift velocities. The electron density was obtained by optical interferometry. The results are compared to hydrodynamic computer modeling. 6 refs., 6 figs.

The Mirrortron accelerator is a plasma-based ion accelerator concept that, when implemented, should permit both higher acceleration gradients and higher peak-current capabilities than is possible with conventional induction-type accelerators. Control over the acceleration and focussing of an accelerated beam should approach that achieved in vacuum-field-based ion accelerators. In the Mirrortron a low density (10{sup 10} to 10{sup 11} cm{sup {minus}3}) hot electron'' plasma is confined by a long solenoidal magnetic field capped by mirrors''. Acceleration of prebunched ions is accomplished by activating a series of fast-pulsed mirror coils spaced along the acceleration tube. The hot electrons, being repelled by mirror action, leave the plasma ions behind to create a localized region of high electrical gradient (up to of order 100 MV/m). At the Laboratory an experiment and analyses to elucidate the concept and its scaling laws as applied to heavy-ion drivers are underway and will be described. 4 refs., 5 figs.

Westinghouse Savannah River Company, Idaho National Engineering Laboratory, and Wyle Laboratory cooperated in a series of single- and two-component calibration tests conducted to obtain sufficient information for calibrating flowmeters, to observe flow patterns, and to estimate void functions. Testing, conducted in large-diameter horizontal pipe, covered total flows of 0.19 to 1.89 m{sup 3}/s (3000 to 30000 gpm) and inlet void fractions up to 40%. A flow regime map, constructed using video images of the flow patterns and void fraction data, was compared with maps from the literature, with generally good agreement for interpretation of flow patterns. 5 refs.

Lawrence Livermore National Laboratory (LLNL) has implemented a computer control system for operation of an FN tandem accelerator. The control software utilized is the Thaumaturgic Automated Control Logic (TACL) written by the Continuous Electron Beam Accelerator Facility and co-developed with LLNL. Details of the design philosophy, hardware configuration, control software, and special control algorithms will be presented. 2 refs., 4 figs.

This paper contains information information on: accelerator and detector; QCD studies; studies of the electroweak force; The search for the top quark; {beta} physics at hadron colliders; and the search for exotic objects and prospects for the future.

ICF target design studies done for the Nova Upgrade have identified conditions under which the target ignition ``cliff`` is shifted to much lower drive energy albeit with the penalty that the gain achieved at a given energy is also smaller. These targets would repeatedly produce the output and spectra of a higher gain targets at low yield. They should, thus, allow building much smaller R&D reactors with full thermonuclear effects. Demonstration reactor at the 1 to 100 MW{sub e} level appear to be feasible with driver energies of 0.5 to 2.0 MJ per pulse. These smaller, less expensive test and demonstration facilities should result in lower IFE development cost. If the U.S. government builds a driver and target factory, it is also conceivable that commercial organizations could build their own scaled concepts of IFE reactors using the beams and targets supplied by the government`s facilities.

The Apiary B Factory is a proposed high-intensity electron-positron collider. This paper presents the lattice design for this facility, which envisions two rings with unequal energies in the PEP tunnel. The design has many interesting optical and geometrical features due to the needs to conform to the existing tunnel, and to achieve the necessary emittances, damping times and vacuum. Existing hardware is used to a maximum extent.