This report discusses the Iraqi debt problem in three parts: [1] overview of the Iraq debt situation following the ouster of the Saddam regime; [2] subsequent debt relief negotiations and their resolution; [3] possible implications for future debt relief cases that arise from Iraq's experience. The implications are: a willingness by the international community to grant a stay on the enforcement of creditor rights; an increased flexibility in Paris Club debt relief decisions; and an unwillingness by successor regimes to claim that their debt is odious and repudiate it.

This report covers the 2007 Department of Defense (DOD) major procurement initiative to replace most up-armored High Mobility, Multi-Wheeled Vehicles (HMMWVs) with Mine-Resistant, Ambush-Protected (MRAP) vehicles. It looks at the cost and subsequent budgets of this initiative. Among potential issues for congressional consideration are the status of older, unused MRAPS in Afghanistan that are reportedly not being used because of their size and weight; possible redundancies with the MRAP, M-ATV, and the Joint Light Tactical Vehicle (JLTV) programs; and actual Marine M-ATV requirements.

This report provides a detailed analysis of contractor personnel trends and contracting dollars obligated in U.S. Central Command (CENTCOM), Afghanistan, and Iraq.

This report discusses major judicial opinions concerning suspected enemy belligerents detained in the conflict with Al Qaeda and the Taliban. The report addresses all Supreme Court decisions concerning enemy combatants. It also discusses notable circuit court opinions addressing issues of ongoing relevance.

This report discusses mechanisms used to continue appropriations in the absence of enactment of regular appropriations acts and to complete the annual appropriations process. Completion of appropriations after the beginning of each fiscal year may cause agencies to delay or cancel some planned research and development (R&D) projects and equipment acquisition.

This report provides a graphical overview of historical trends in discretionary budget authority (BA) from FY1976 through FY2011, enacted levels for FY2012 spending, and the levels consistent with President Obama's proposals for FY2013 through FY2017. It also includes a background on functional categories and a section discussing historical spending trends.

This report gives a map of current commercial nuclear power plants and their relation to seismic hazards.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Greg Abbott, regarding a legal question submitted for clarification; Investigative Authority of the Texas Forensic Science Commission (RQ-0943-GA)

None

None

None

None

Japan’s nuclear incident has engendered much public and congressional concern about the possible impact of radiation on the Japanese public, as well as possible fallout on U.S. citizens. This report provides information on technical aspects of the nuclear incident, with reference to human health.

This report consists of changes in the distribution of income among tax filers between 1966 and 2006 with the role of labor income, capital income and tax policy.

This report analysis Brazil's political, economic, and social conditions, and how those conditions affect its role in the world and its relationship with the United States.

This report documents melter and off-gas performance results obtained on the DM1200 HLW Pilot Melter during processing of simulated HLW C-106/AY-102 feed. The principal objectives of the DM1200 melter testing were to determine the achievable glass production rates for simulated HLW C-106/AY-102 feed; determine the effect of bubbling rate on production rate; characterize melter off-gas emissions; characterize the performance of the prototypical off-gas system components as well as their integrated performance; characterize the feed, glass product, and off-gas effluents; and to perform pre- and post test inspections of system components.

The catalytic conversion of coal-derived syngas to C{sub 2+} alcohols and oxygenates has attracted great attention due to their potential as chemical intermediates and fuel components. This is particularly true of ethanol, which can serve as a transportation fuel blending agent, as well as a hydrogen carrier. A thermodynamic analysis of CO hydrogenation to ethanol that does not allow for byproducts such as methane or methanol shows that the reaction: 2 CO + 4 H{sub 2} {yields} C{sub 2}H{sub 5}OH + H{sub 2}O is thermodynamically favorable at conditions of practical interest (e.g,30 bar, {approx}< 250 C). However, when methane is included in the equilibrium analysis, no ethanol is formed at any conditions even approximating those that would be industrially practical. This means that undesired products (primarily methane and/or CO{sub 2}) must be kinetically limited. This is the job of a catalyst. The mechanism of CO hydrogenation leading to ethanol is complex. The key step is the formation of the initial C-C bond. Catalysts that are selective for EtOH can be divided into four classes: (a) Rh-based catalysts, (b) promoted Cu catalysts, (c) modified Fischer-Tropsch catalysts, or (d) Mo-sulfides and phosphides. This project focuses on Rh- and Cu-based catalysts. The logic …

Short sample HTS power cable composed of multiple 344C-2G strands and designed to energize a fast-cycling dipole magnet was exposed to a sweeping magnetic field in the (2-20) T/s ramping rate. The B-field orientation toward the HTS strands wide surface was varied from 0{sup 0} to 10{sup 0}, in steps of 1{sup 0}. The test arrangement allowed measurement of the combined hysteresis and eddy current power losses. For the validity of these measurements, the power losses of a short sample cable composed of multiple LTS wire strands were also performed to compare with the known data. The test arrangement of the power cable is described, and the test results are compared with the projections for the eddy and hysteresis power losses using the fine details of the test cable structures.

None

Recycling mixed aluminum scrap usually requires adding primary aluminum to the scrap stream as a diluent to reduce the concentration of non-aluminum constituents used in aluminum alloys. Since primary aluminum production requires approximately 10 times more energy than melting scrap, the bulk of the energy and carbon dioxide emissions for recycling are associated with using primary aluminum as a diluent. Eliminating the need for using primary aluminum as a diluent would dramatically reduce energy requirements, decrease carbon dioxide emissions, and increase scrap utilization in recycling. Electrorefining can be used to extract pure aluminum from mixed scrap. Some example applications include producing primary grade aluminum from specific scrap streams such as consumer packaging and mixed alloy saw chips, and recycling multi-alloy products such as brazing sheet. Electrorefining can also be used to extract valuable alloying elements such as Li from Al-Li mixed scrap. This project was aimed at developing an electrorefining process for purifying aluminum to reduce energy consumption and emissions by 75% compared to conventional technology. An electrolytic molten aluminum purification process, utilizing a horizontal membrane cell anode, was designed, constructed, operated and validated. The electrorefining technology could also be used to produce ultra-high purity aluminum for advanced materials applications. …

The prompt emission from gamma-ray bursts (GRBs) still requires a physical explanation. Studies of time-resolved GRB spectra, observed in the keV-MeV range, show that a hybrid model consisting of two components, a photospheric and a non-thermal component, in many cases fits bright, single-pulsed bursts as well as, and in some instances even better than, the Band function. With an energy coverage from 8 keV up to 300 GeV, GLAST will give us an unprecedented opportunity to further investigate the nature of the prompt emission. In particular, it will give us the possibility to determine whether a photospheric component is the determining feature of the spectrum or not. Here we present a short study of the ability of GLAST to detect such a photospheric component in the sub-MeV range for typical bursts, using simulation tools developed within the GLAST science collaboration.

The project objective was to further assist in the commercialization of fuel cell and H2 technology by building further upon the successful fuel cell lift truck deployments that were executed by LiftOne in 2007, with longer deployments of this technology in real-world applications. We involved facilities management, operators, maintenance personnel, safety groups, and Authorities Having Jurisdiction. LiftOne strived to educate a broad group from many areas of industry and the community as to the benefits of this technology. Included were First Responders from the local areas. We conducted month long deployments with end-users to validate the value proposition and the market requirements for fuel cell powered lift trucks. Management, lift truck operators, Authorities Having Jurisdiction and the general public experienced 'hands on' fuel cell experience in the material handling applications. We partnered with Hydrogenics in the execution of the deployment segment of the program. Air Products supplied the compressed H2 gas and the mobile fueler. Data from the Fuel Cell Power Packs and the mobile fueler was sent to the DOE and NREL as required. Also, LiftOne conducted the H2 Education Seminars on a rotating basis at their locations for lift trucks users and for other selected segments of the …