The monitoring of thermal and resonance neutron flux in a thermal reactor having high flux over periods of time from 1 to 12 months using think Co foils is considered. Special attention is paid to the many correction factors to be applied to the activation data; neutron temperature, effective cadmium cutoff energy, burnout of Co59 and Co60, and decay of Co60. Results on a homogeneity test of 10 mil, 0.08% Co-A1 alloy foils is given.

The preparation of radioactive metallurgical specimens for microscopic examination is one of the responsibilities of the Radiometallurgy Sub-Unit. An abrasive cut-off machine development program, based upon a previous experimental model, was undertaken to provide a method for sectioning of irradiated materials without undue personnel exposure or spread of contamination and finally to provide data for the design of an abrasive cutting unit for use in the work cells in the Radiometallurgy Building. A horizontal-feed type set-off machine, powered by a 7 1/2 hp motor with V-belt drive, has been developed for the submerged sectioning of irradiated uranium and is currently being used successfully to obtain samples for metallurgical, chemical and physical investigations without excessive personnel exposure or spread of radioactive contaminates.

Describes the current prototype model of a linear amplifier, two-channel pulse-height analyser, two-channel count-rate meter, and count-rate difference detector for a gamma-ray spectrometer monitor developed to approach the above design criteria.