This paper presents a survey of methods, commonly in use or under development, to produce beams of polarized negative ions for injection into accelerators. A short summary recalls how the hyperfine interaction is used to obtain nuclear polarization in beams of atoms. Atomic-beam sources for light ions are discussed. If the best presently known techniques are incorporated in all stages of the source, polarized H/sup -/ and D/sup -/ beams in excess of 10 ..mu..A can probably be achieved. Production of polarized ions from fast (keV) beams of polarized atoms is treated separately for atoms in the H(25) excited state (Lamb-Shift source) and atoms in the H(1S) ground state. The negative ion beam from Lamb-Shift sources has reached a plateau just above 1 ..mu..A, but this beam current is adequate for many applications and the somewhat lower beam current is compensated by other desirable characteristics. Sources using fast polarized ground state atoms are in a stage of intense development. The next sections summarize production of polarized heavy ions by the atomic beam method, which is well established, and by optical pumping, which has recently been demonstrated to yield very large nuclear polarization. A short discussion of proposed ion sources for …

Reagents were developed which bind covalently to side chains of kallikrein, thereby inactivating the enzyme. Both temporary and irreversible inhibitors have been synthesized. (ACR)

This ARES user's manual provides detailed instructions for a general understanding of the Automated Response Function Code and gives step by step instructions for using the complete code package on a HP-1000 system. This code is designed to calculate response functions of NaI gamma-ray detectors, with cylindrical or rectangular geometries.

High energy x-ray backlighters are necessary to diagnose the implosion symmetry and stability of intermediate and high density targets. Synchronization requirements between the target irradiating pulse and the radiograph place severe constraints on the type of x-ray sources which can be used and favors laser irradiated backlighters. Data gathered on line emitters as a function of laser pulselength, wavelength and intensity in the 5 to 10 keV region are used to determine which diagnostic instruments will be feasible for ICF target experiments, and the requirements for backlighter irradiation.

The Spin Spectrometer at the Holifield Heavy Ion Research Facility (HHIRF) is a multidetector ..gamma..-ray spectrometer consisting of 72 separate NaI detector elements closely packed in a 4..pi.. geometry. The basic apparatus was constructed at Washington University and has been installed and implemented at the HHIRF at Oak Ridge National Laboratory. The spectrometer was designed especially for the investigation of the mechanisms of heavy-ion induced nuclear reactions and of the structure of nuclei with high angular momentum. The data acquisition system is described. (WHK)

The objective of the BX In Situ Oil Shale Project is to demonstrate the technical feasibility of using superheated steam as a heat-carrying medium to retort in situ the oil shale in the Green River Formation leached zone and provide a mechanism for the recovery of this shale oil with a minimum impact on the environment. Utilizing primarily the natural porosity in the leached zone, approximately one trillion Btus of heat will be injected into a site over a two-year period to heat to retorting temperature a shale zone approximately 550 feet thick and covering about one acre. The field project is located at Equity's BX In Situ site in Rio Blanco County in northwestern Colorado. Environmental activities conducted from March 1, 1980 through February 28, 1981 were a continuation of operational monitoring initiated the previous year that included meteorology, water quality and aquatic ecology monitoring.

The demonstration of ICF scientific feasibility requires success in target design, driver development and target fabrication. Since these are interrelated, we present here some results of ion beam target studies and relate them to parameters of interest to ion accelerators. Ion deposition physics have long been a well known subject apart from high beam currents. Recent NRL experiments at up to 250 kA/cm/sup 2/ ions confirm the classical deposition physics now at current densities which are comparable to most ion targets. On the other hand, GSI data at low current density but 1 to 10 MeV/nucleon are continually being accumulated. They have yet to find anomalous results. Relying on target concepts outlined briefly, we report on the energy gain of ion-driven fusion targets as a function of input energy, ion ranges and focal spot radius. We also comment on some consequences of target gain versus driver and reactor requirements.

Continued development of a system designed to grow crystals by physical vapor transport in the environment of Spacelab III will be described, with special emphasis on simulation of expected space conditions, adjustment of crystal growth parameters, and on board observation and control of the experiment by crew members and ground personnel. A critical factor in the use of mercuric iodide for semiconductor detectors of x-rays and gamma-rays is the crystalline quality of the material. The twofold purpose of the Spacelab III experiment is therefore to grow single crystals with superior electronic properties as an indirect result of the greatly reduced gravity field during the growth, and to obtain data which will lead to improved understanding of the vapor transport mechanism. The experiments planned to evaluate the space crystals, including gamma-ray diffractometry and measurements of stoichiometry, lattice dimensions, mechanical strength, luminescense, and detector performance are discussed.

Low to moderate temperature (< 150/sup 0/C) geothermal fluids are being developed in the southern Raft River Valley of Idaho. Five deep geothermal wells ranging in depth from 4911 feet to 6543 feet (1490 to 1980 meters) and two intermediate depth (3858 feet or 1170 meters) injection wells have been drilled within the Raft River KGRA. Several shallower (1423-500 feet or 430-150 meters) wells have also been constructed to monitor the environmental effects of geothermal development of the shallower aquifer systems. Sampling of water from wells within the KGRA has been conducted since the onset of the project in 1974. Five analytical laboratories have conducted analyses on waters from the KGRA. Charge-balance error calculations conducted on the data produced from these laboratories indicated that data from three laboratories were reliable while two were not. A method of equating all data was established by using linear regression analyses on sets of paired data from various laboratories. The chemical data collected from the deep geothermal wells indicates that a two reservoir system exists within the Raft River KGRA. Each reservoir is associated with a major structural feature. These features are known as the Bridge Fault System (BFS) and the Narrows Structure (NS).

This research program has investigated the thermal stability of several ferritic stainless steels containing 15 to 18 weight percent chromium over the temperature range 400/sup 0/C to 550/sup 0/C where the 475/sup 0/C embrittlement reaction is of concern. A major part of the experimental work was concerned with the effect of ternary additions of up to 6 weight percent; aluminum on the kinetics and the magnitude of the embrittlement reaction. The work also included a binary Fe-18Cr alloy, a ternary Fe-18Cr-2Mo, and two commercial alloys, Armco type 430 and type 18SR. Resistometric studies of the kinetics of microstructural instability indicated that aluminum additions promote the tendency of chromium atoms to cluster at temperatures in the vicinity of 475/sup 0/C. The magnitude of embrittling reaction is intensified by the aluminum additions which are expected to restrict dislocation cross slip and increase the coherency strains associated with the alpha prime precipitates. Activation energy determinations for the decomposition reaction indicate that the rate controlling process is most likely determined by the diffusion of chromium, and the tendency of aluminum to enhance the clustering of chromium atoms is similar to the effect reported for molybdenum additions by previous workers.

A separator assembly for use in a spent-nuclear-fuel shipping cask has a honeycomb-type wall structure defining parallel cavities for holding nuclear fuel assemblies. Tubes formed of an effective neutron-absorbing material are embedded in the wall structure around each of the cavities and provide neutron flux traps when filled with water.

The goal of the SOLCAN Program Planning Task is to assist in the development, at the state and local levels, of consumer assurance approaches that will support the accelerated adoption and effective use of new products promoted by government incentives to consumers to meet our nation&#x27;s energy needs. The task includes state-conducted evaluations and state SOLCAN meetings to identify consumer assurance mechanisms, assess their effectiveness, and identify and describe alternative means for strengthening consumer and industry assurance in each state. Results of the SOLCAN process are presented, including: a Solar Consumer Protection State Assessment Guide; State Solar Consumer Assurance Resources for Selected States; State Solar Consumer Protection Assessment Interviews for Florida; and state SOLCAN meeting summaries and participants. (LEW)

A geothermal well has been drilled at the St. Mary's Hospital in Pierre, South Dakota. The well is 2176 feet deep and artesian flows 375 gpm at 106/sup 0/F. The well is producing fluids from the Mississippian Madison Group, a sequence of carbonate rocks deposited over several western states. The project was funded to demonstrate the goethermal potential of this widespread aquifer. This case study describes the development of the project through geology, drilling, stimulation, and testing.

When calculations of flux are done in less than three dimensions, bucklings are normally used to model leakages (flows) in the dimensions for which the flux is not calculated. If the net leakage for a given energy group is outward (positive), the buckling is positive, and buckling methods work well. However, if the new leakage for a given energy group is inward (negative), the buckling is negative and can lead to numerical instabilities (oscillations in the iterative flux calculation). This report discusses two equivalent nonbuckling methods to model inward leakages. One method (the chi/sub g/ method) models these incoming neutrons by additional fission sources. The other method (the ..sigma../sub s/(1 ..-->.. g) method) models them by increased downscatter sources. The derivation of the two methods is shown, and the flux spectra obtained by their use are compared with those obtained from two-dimensional (RZ) calculations.

Annular-coated (graphite)-pressurized and sphere-pac fuel rod designs, which are expected to exhibit improved PCI-failure resistance, and, thus, more reliable extended burnup performance, are being developed. Data sufficient to provide the technical bases needed to license lead test assemblies of the improved designs for irradiation in commercial LWRs are being obtained. Out-of-reactor experiments, in-reactor instrumented experiments, in-reactor power-ramp tests, and lead-rod demonstration irradiations are providing the needed data to support the technical bases. Results obtained to-date confirm the expected performance improvement compared with a solid-pellet reference design. The degree of improvement with respect to PCI-resistance remains to be quantified during forthcoming power-ramp tests on fuel rod segments irradiated to moderate burnup levels in a commercial LWR.

An experimental task plan for the BWR/4 core spray task of the Refill-Reflood Test Program is presented. The test program will provide core spray distribution data for a 30 degree sector of the BWR/4 and 5-218 design. This design uses different nozzle types and different sparger elevations than the BWR/6-218 design which was tested previously. Test parameter ranges are specified; individual tests are defined; and measurement and data utilization plans are defined.

Diffusion data indicate the Am, Cm, and Np migrate 1.2, 0.8, and 26 centimeters, respectively, in a thousand years. Thus, excluding mass transport by moving water or wind, actinide elements, such as Cm, Am, and Np that find their way to the soil-squatic environment are relatively immobile. Measured diffusion coefficients, corrected for distribution between the aqueous and soil phases, tortuosity, negative absorption, and relative fluidity are in reasonable agreement with aqueous diffusion coefficients. However, agreement depends strongly on measurement method used to determine distribution ratios.

Investigations over several years at the Morgantown Energy Technology Center have been concerned with the development of a regenerable metal oxide desulfurization sorbent which would function on hot coal-derived fuel gas. In the latest phase of testing, a combination of zinc oxide with iron oxide as zinc ferrite has produced a sorbent which has demonstrated regenerability and capability of removing sulfur from simulated hot coal gas to a level of 1 to 10 ppM by volume. The principal finding at this stage of the project is that the compound zinc ferrite and also iron oxide containing some zinc ferrite have hydrogen sulfide absorption performances very similar to those of zinc oxide. Extruded sorbents made from these compounds have been demonstrated to perform with varying ability in the temperature range 800/sup 0/F (427/sup 0/C) to 1400/sup 0/F (760/sup 0/C) at a space velocity of 2000 hourly and a hydrogen sulfide concentration of 2.7 percent. They have also been shown to be regenerable with a 50/50 percent v/v steam-air mixture at 1000/sup 0/F (538/sup 0/C) and 600 hourly space velocity with no loss of absorptive power. Both zinc ferrite and zinc oxide appear to perform optimally in the middle of the temperature …

Geothermal Resource Area 6 includes Lander and Eureka Counties. There are several different geothermal resources ranging in temperature from 70/sup 0/F to in excess of 400/sup 0/F within this two country area. Eleven of these resources are considered major and have been selected for evaluation in this Area Development Plan. The various potential uses of the energy found at each of the 11 resource sites were determined after evaluating the study area's physical characteristics, land ownership and land use patterns, existing population and projected growth rates, and transportation facilities. These were then compared with the site specific resource characteristics. The uses considered were divided into five main categories: electrical generation, space heating, recreation, industrial process heat, and agriculture. Within two of these categories certain subdivisions were considered separately. The findings about each of the 11 geothermal sites considered are summarized.

Practical applications of ion linacs are more viable now than ever before because of the recent development of the radio-frequency quadrupole accelerating structure, as well as other technological advances developed under the Pion Generator for Medical Irradiations program. This report describes a practical technique for varying the energy of drift-tube linacs and thus further broadening the possibilities for linac applications. This technique involves using the post couplers (normally used to flatten and stabilize the electric fields) to create a step in the fields, thus terminating the acceleration process. In the examples given for a 70-MeV accelerator design, when using this technique the energy is continuously variable down to 20 MeV, while maintaining a small energy spread.

Data on deep inelastic scattering of leptons by nucleons and nuclei have been accumulated for several years. Results exist from several experiments with electron, muon, neutrino beams. In this talk I shall review the most recent experiments which measured nucleon structure functions with ..nu.. and ..mu.. beams. In particular, I will summarize the results on R = sigma/sub L//sigma/sub T/ measurement, on F/sub 2/(x,Q/sup 2/), and xF/sub 3/(x,Q/sup 2/), and their interpretation in terms of QCD, including both gluon radiation and higher twist phenomena.

An experiment is described which is designed to demonstrate the forgiveness of inertia welding, that is, the relative insensitivity of weld strength to variations in energy (rotational speed of parts) and axial force. Although easily observed variations in the welding parameters produced easily observed changes in weldment configuration and changes in dimension (upset), only extremes in parameters produced changes in weld strength. Consequently, process monitoring and product inspection would be sufficient for quality assurance in a production environment.

The invention teaches means for detecting unauthorized tampering or substitutions of a device, and has particular utility when applied on a seal device used to secure a location or thing. The seal has a transparent body wall, and a first indicia, viz., a label identification is formed on the inside surface of this wall. Second and third indicia are formed on the outside surface of the transparent wall, and each of these indicia is transparent to allow the parallax angled viewing of the first indicia through these indicia. The second indicia is in the form of a broadly uniform pattern, viz., many small spaced dots; while the third indicia is in the form of easily memorized objects, such as human faces, made on a substrate by means of halftone printing. The substrate is lapped over the outside surface of the transparent wall. A thin cocoon of a transparent material, generally of the same material as the substrate such as plastic, is formed over the seal body and specifically over the transparent wall and the second and third indicia formed thereon. This cocoon is seamless and has walls of nonuniform thickness. Both the genuineness of the seal and whether anyone has …

The Middlesex Sampling Plant Site (MSPS) is a United States Department of Energy (DOE) owned facility formerly used for processing and storage of radioactive materials, and currently utilized for interim storage of low level radioactive residues resulting from the cleanup of surrounding properties. The site occupies 9.61 acres of industrial property at 239 Mountain Avenue in the Borough of Middlesex, New Jersey. As a result of work done at the site from 1943 to 1955, in processing uranium and thorium ores and concentrates, the site, as well as a number of properties in the vicinity, has been contaminated with radioactive residues. The purpose of this report is to describe environmental surveillance/monitoring programs previously and currently conducted at the MSPS. This information will be essential for interpretation of current data, and for developing and implementing future monitoring programs at the site. The program of environmental monitoring is divided into two phases: (1) routine long-term surveillance and (2) non-routine monitoring during remedial action. In the pre-remedial action period and during the time following remedial work, only routine surveillance of the site is necessary to ensure against contamination of offsite areas. While decontamination work is actually in progress, several changes in surveillance strategy …