"Several multiplier phototubes produced by England, Russia, or Switzerland were evaluated for amplification, photocathode sensitivity, photo-electron collection efficiency, cathode uniformity, and dark current. A description of the various tubes by designation numbers is given, along nth a description of techniques and equipment used in testing."

"The resonant frequencies of the magnet power supply are investigated. It is found that there are eleven resonant modes in addition to the desired mode of operation with six additional resonant frequencies. From measurements of the choke model, it appears that the frequencies of some of the spurious modes may lie in the same range as the desired mode of operation."

"The effects of radiation emission on the motion of electrons in high energy synchrotrons are analyzed. The damping rates and quantum excitation of the three principal modes of oscillation are derived for strong focusing and constant gradient accelerators. Methods for correcting the radiation effects for strong focusing accelerators are discussed."

"Formulas are given to express the general particle trajectory and the equilibrium orbit for a slightly disturbed synchrotron in terms of the amplitude and phase functions for the ideal machine. If these functions are known, orbit computations can be carried out by simple integration procedures. The formalism is expected to be useful especially for considerations such as beam alignment or generation of an external electron beam. Some equations given earlier are repeated for completeness."

"A method is outlined for calculating the trajectories, through the magnetic field of the following magnet pair of positive and negative particles of different momenta produced in a target. Representative trajectories were computed by this method and are given numerically."

"A ring circuit is a succession or two-port networks and at least one three-port network, each feeding the next at one port and the last feeding the first so that the sequence closes on itself leaving at least one input port. The input admittance is derived in terms ef various matrices describing the circuit for one- and two-input port rings."

"The degree of cleanliness is defined, and the methods and materials to be used are outlined for carbon and low alloy steels, 300 and 400 series ferritic and austenitic stainless steels, special Ni-Cr base heat-resistant hard-facing and high-temperature brazing alloys, and some non-ferrous materials."

"The effect of beam loading upon the design and performance of the accelerator is examined. Results are given in dimensionless form so that the various equations and grams can be used at any operating frequency. The constant gradient accelerator is somewhat less subject to beam loading than the uniform accelerator structure. For an accelerator of given filling time and 20% more."

"One of the limitations of the Zircex Process is the large percentage loss of U which is carried off with the volatile ZrCl/sub 4/. Since the ratio of U to Zr in the fuel element is quite small (< 1%), a large percentage of U loss can be caused by small amounts of U in the ZrCl/sub 4/ sublimate. The U loss must be kept below 1% if the Zircex Process is to be adapted to industrial scale processing."

"The general techniques of voltammetry with continuously varying potential have been applied to a differential method in which two electrolysis cells are used, each with a hanging mercury drop electrode. Using this method it is possible to determine lO/sup -6/ solutions with increased precision, and it is also possible to analyze solutions as dilute as 10/sup -6/ without removing oxygen from the electrolysis cells. Mixtures can be analyzed easily by adding individual components of the mixture to the reference cell."

The chief purpose of this contract is the development of ceramic materials with high dielectric constant and high dielectric strength values, and suitable for use of dielectrics in capacitors capable of storing large amounts of energy in small volumes. The principal features of work during this quarter have been research into the causes of variation in ceramic density, overcoming the problems of pressing large disks, and the development of fully-contoured medium-sized disks. Work performed during the sixth quarter included (1) Material development and sample preparation; (2) Ceramic properties and forming; (3) Fabrication of large ceramics; (4) Electrical measurements ; and (5) Capacitor measurements and design

Results of an initial examination of non-fuel-bearing materials for the Marine Gas Cooled Reactor are presented. Areas given specific attention include structural and cladding materials and graphite moderator. Other areas not included because of classification include zirconium hydride moderator and control materials. In each report section, available pertinent information is summarized and a plan for future work is given.