Activities in a program to develop techniques in the use of pulsed neutron sources to measure shutdown parameters related to large thermal power reactors are reported. In the course of this program, a new theory was suggested and an experimental apparatus was designed and built. Experiments were carried out to test the new model. This present report contains additional data and information extracted from the experiments at PG&E Humboldt Bay Power Reactor at Eureka, California. During the last days of 1963 a number of control rod and fuel bundle worth measurements were made in the ESADA Vallecitos Experimental Superheat Reactor (EVESR) using the (k[beta]/[script l] technique. A description of the experiments is given in the text of the report and some results are reported. A computer program was written to perform the data analysis of the pulsed neutron experiments and the code is discussed in the Appendix.

The Babcock and Wilcox Company (B&W) proposes to construct and operate a Nuclear Test Reactor on the grounds of the Company's integrated nuclear facilities site, Mt. Athos, near Lynchburg, Virginia. This preliminary Summary Hazards Report present to the U.S. Atomic Energy Commission (AEC), Division of Licensing and Regulations, a description of the facility, the characteristics of the proposed site, and an evaluation of potential hazards to the area surrounding the site of operation.

Report that summarizes multiple laboratories' reports on global fallout deposition. Reports include data on Strontium-90 deposition recorded by the Health and Safety Laboratory, data from other laboratories, related interpretive reports, and recent publications related to fallout.

From Abstract: "The approach to the problem has been as fundamental as possible with emphasis on quantitative measurements and calculations of the energy, angular, and spatial distributions of weapons radiations in an air-over-ground geometry. Spatial distributions of dose in various shields, including Japanese dwellings, have been measured. Techniques have been developed in Japan for verifying the location of survivors and accurately describing their shielding environments."

Report that summarizes multiple laboratories' reports on global fallout deposition. Reports include data on Strontium-90 deposition recorded by the Health and Safety Laboratory, data from other laboratories, related interpretive reports, and recent publications related to fallout.

Report that summarizes multiple laboratories' reports on global fallout deposition. Reports include data on Strontium-90 deposition recorded by the Health and Safety Laboratory, data from other laboratories, related interpretive reports, and recent publications related to fallout.

Report that summarizes multiple laboratories' reports on global fallout deposition. Reports include data on Strontium-90 deposition recorded by the Health and Safety Laboratory, data from other laboratories, related interpretive reports, and recent publications related to fallout.

Technical report. From Abstract: "A process was developed for manufacturing aluminum-clad slugs containing UO2 or ThO2 dispersed in an aluminum matrix. In this process a mixture of the oxide and aluminum powder is cold compacted to form the billet core, which is then coextruded with an aluminum sheath to produce the clad slug."

Technical report. From Abstract: "The thermal conductivities of aluminum-lithium alloys containing up to * wt % lithium were determined at temperatures between 125 and 260ºC. The addition of lithium to aluminum sharply reduces the conductivity from 0.60 cal/(sec)(ºC)(cm) for pure aluminum to 0.22 cal/(sec)(ºC)(cm) for 2 wt % alloys; further addition linearly and more gradually decreases the conductivity to 0.16 cal/(sec)(ºC)(cm) for a 7.9 wt % alloy."

Technical report. From Abstract: "A combination densitometer and analog computer is described which determines radiation exposure of photographic film used in personnel badges. The range of the instrument is 0 to 300 mr gamma and 0 to 300 mrad beta plus gamma. A novel phototube circuit is used to obtain logarithms directly."

Technical report. From Abstract : "The separation of neptunium and plutonium by anion exchange in nitrate solutions was studied under a wide variety of experimental conditions. A method of separation was developed that is adaptable to remote operation in the plant. In the method, Np(IV) and Pu(IV) are absorbed on an anion exchange resin from 8M nitrate solution. The column is washed with 8M HNO3 to remove contaminants; then the Pu is removed as Pu(III) by washing the column with HNO3 containing ferrous sulfamate and hydrazine. Finally, the Np is eluted with dilute HNO3."

The objective of the Accurate Nuclear Fuel Burnup Analyses program is to develop more accurate methods for burnup analysis for general use than the current method of analysis of Ca-137 or Sr-90. The program will require from three to five years of effort.

A research program is being conducted to obtain experimental data in the irradiation of plutonium-enriched fuel to confirm a theoretical model for predicting isotopic composition and reactivity changes in plutonium-enriched, light-water-moderated reactors. All program efforts have been temporarily deferred except for those associated with the irradiation of the program fuel element in the VBWR. The program fuel element was exposed to a burnup of 465 MWD/T during the quarter which brings the total to 2334 MWD/T. On the basis of the computed isotopic composition, the burnup obtained was 1450 MWD/T.

The United States and the European Atomic Energy Community (Euratom), on May 29, and June 18, 1958, signed an agreement which provides a basis for co-operation in programs for the advancement of the peaceful applications of atomic energy. The work described in this report represents the Joint U.S.-Euratom effort. The over-all development program is designed to obtain the test data and operating experience necessary to eventually realize a 50 percent increase in the output of the Garigliano Nuclear Power Station located at Sessa Aurunca (Campania, Italy). Two tasks are in progress: Task III-F involves the preparation of test specimens of reactor vessel material for irradiation; Task IV consists of the formulation of specification for a complete data logging and computer system.

From introduction: "Development of nuclear reactor cores having high power density, long fuel life, and low fabrication costs is the objective of this program sponsored by the AEC."

From abstract: "A description is given of a simple circuit used to produce negative voltage pulses up to 60 kilovolts with a portion rising with constant slope up to 10 kilovolts per microsecond."

From introduction: "In this paper the adaptation of the wax lab surface vibratory polisher is described. The wax lap requires little maintenance during the life of the lap. It is not necessary to remove any of the holding devices on the bowl to clean and recondition the lap. The bowl is merely washed out, recharged and placed in operation. The wax lap will not wrinkle or tear, nor is it necessary to change it each day such as the silk or nylon cloths."

From abstract: "The mass spectra of the α-amino acids have been obtained in a mass spectrometer equipped with a heated crucible ion source. Correlations of these data have been made with the molecular formulae of the ion fragments, and mechanisms leading to these fragments are proposed. Comparisons of these data have been made with the mass spectra of the ethyl esters of the amino acids and with other carboxylic acids and their esters."

From abstract: "The formation constants of the RChOH- species, formed by interaction of individual rare-earth nitrilotriacetate species and KOH at 25°C and an ionic strength of 0.1, have been determined by the potentiometric method, i.e., computed from the pH values of equilibrium mixtures containing varying proportions of rare-earth complex and base. The relationship of these constants to the ion-exchange separation of rare earths at high pH has been discussed."

From abstract: "Sintering is broadly defined as all aspects of the adhesion, densification, shrinkage, and consolidation which accompanies the reduction in surface energy of a powder compact which occurs upon application of heat and/or pressure. The process of sintering is then further divided into the initiation, material transport, and grain growth-recrystallization stages. A general review is made of each of these stages, noting typical work which has contributed to progress in each area involved."

From abstract: "The adsorption of ethane, ethylene and acetylene on clean iridium in a field emission microscope has been found to cause characteristic changes in the work function of the iridium surface. Further changes, which are time and temperature dependent, result when such surfaces are heated. Flash filament experiments have shown that the changes in work function upon heating are due to desorption reactions and that the desorbed product consists principally of hydrogen. By assuming a linear relationship between surface coverage and work function, it has been possible to determine the desorption kinetics from the observed rates of work function change at various temperatures. The results are consistent with a mechanism involving stepwise surface dehydrogenation in which a pair of hydrogen atoms is removed from the hydrocarbon molecule in each step, followed by desoption of the adsorbed hydrogen. At very high temperatures the remaining carbon atoms are removed, presumably by evaporation."

Summary: Prototype testing of the safety and control rod drives indicated that both units functioned properly. No major problems were encountered during testing. Seal leakage data collected indicated that the seal units were performing satisfactorily. Scram times during both cold and hot testing were excellent and actually better than expected.

Abstract: This technical report summarizes the data obtained in a recent literature survey conducted to determine the effects of neutron irradiation on the impact and other mechanical properties of both ferritic steels and austenitic stainless steels. The survey was primarily aimed at obtaining sufficient data on the behavior of pressure vessel steels at high integrated neutron flux levels in order that a reference material of construction could be selected for the SM-2 (APPR-1B) reactor vessel. Materials studied in this literature survey included carbon and low alloy steels such as: ASTM A-212B, ASTM A-201, ASTM A-301B (CR-Mo), ASTM A-106 (coarse and fine grained), ASTM A-285, ASTM A-302B (Mn-Mo), ASTM A-353, ASTM A-203 Grade D, E-7016 carbon steel weld metal, USS Carilloy T-1, HY-65 and HY-80. In addition, Types 304 and 347 stainless steels were also investigated as representative austenitic materials which might be used in pressure vessel construction. A careful evaluation was made of the irradiation induced changes in the mechanical properties of the above materials. The ferritic steels were evaluated primarily on the basis of increases in transition temperature due to irradiation and decreases in the amount of maximum energy absorbed prior to ductile failure. Factors such as industrial experience, …

A geometrical treatment has been used to outline the theoretical properties of optical fibers which are imperfect as well as geometrically and optically perfect. Experiments have been performed to measure some to the optical properties of individual fibers and fiber bundles.