Correlations in the production of charged particles and photons can be examined in detail in the central and forward rapidity range using high multiplicity ({ge}100 charged tracks) events from JACEE emulsion chambers. Results are presented on several forms of correlations studies. 9 refs., 2 figs.

The objective of the subscale test program were designed to provide sorbent and additive selection guidance, and, in so doing, supply answers to the questions posed in the preceding section. The objectives are: Identify the best commercial hydrate sorbent and the best enhanced hydrate sorbent from a list of nine types, based upon S0{sub 2} removal at Ca/S=2. Determine the relative effectiveness of sodium sesquicarbonate versus sodium bicarbonate for S0{sub 2} and NO{sub x} control over the temperature range of 200{degrees}F--400{degrees}F. Identify the best NO{sub 2} suppressing additive among the group of ammonia, urea, and activated carbon.

Previous results have shown that the yeast extract concentration and the medium pH significantly affect the ratio of ethanol to acetate in the product stream when fermenting CO, CO{sub 2} and H{sub 2} in synthesis gas to products by Clostridium ljungdahlii. Further experimentation has demonstrated the impact of eliminating yeast extract from the medium (except for the slight quantity transferred with the inoculm), especially when coupled with low pH. An ethanol to acetate product ratio of 4.0 was obtained at pH 4.5 without yeast extract present in the medium when using culture previously exposed to growth-limiting H{sub 2}S. The product ratio was 2.0 at pH 4.0 (nearly three times the value of pH 4.5 and nine times the value of pH 5.0) without yeast extract present in the media when using the standard (unexposed) culture.

This report describes the analysis of carbonxyl-terminated butadiene (CTB), carboxyl-terminated butadiene/acrylonitrile (CTBN), and a CTBN adduct prepared by reaction with Epon 828. Data from gel permeation chromatography, nuclear magnetic resonance spectroscopy, high performance liquid chromatography, and ion chromatography are presented and discussed. Quantitative methods based on carbon-13 and proton NMR for analyzing CTBN are described. Proton NMR was found to be useful in identifying lots that have an abnormal amount of CTBN protons. One such lot exhibited a phase separation of a polybutadiene impurity. Carbon-13 NMR was found to be capable of determining nitrile content directly. Carbon-13 NMR had a relative standard deviation of 8.3% and a proton NMR of 3.9%. Proton NMR was found to be useful in identifying lots that have 5% more CTBN protons than other lots. 3 refs., 11 figs., 4 tabs.

Neoclassical transport of energetic minority tail ions, which are generated by high powered electromagnetic waves of the Ion Cyclotron Range of Frequencies (ICRF) at the fundamental harmonic resonance, is studied analytically in tokamak geometry. The effect of Coulomb collisions on the tail ion transport is investigated in the present work. The total tail ion transport will be the sum of the present collision-driven transport and the wave-driven transport, which is due to the ICRF-wave scattering of the tail particles as reported in the literature. The transport coefficients have been calculated kinetically, and it is found that the large tail ion viscosity, driven by the localized ICRF-heating and Coulomb slowing-down collisions, induces purely convective particle transport of the tail species, while the energy transport is both convective and diffusive. The rate of radial particle transport is shown to be usually small, but the rate of radial energy transport is larger and may not be negligible compared to the Coulomb slowing-down rate. 18 refs., 2 figs.

DEPOT has been developed to provide tracking for the Stanford Linear Collider (SLC) control system equipment. For each piece of equipment entered in the database, a complete service, maintenance, modification, certification, location history, and, optionally, a radiation exposure history, can be maintained. To facilitate data entry accuracy, efficiency, and consistency, barcoding technology has been used extensively. DEPOT has been an important tool in improving the reliability of the microsystems controlling SLC. It is now being adopted by other systems at SLAC. 6 refs., 6 figs.

We report on a recent search for {bar {nu}}{sub e} appearance from stopped {pi}{sup +} {yields} {mu}{sup +}{nu}{sub {mu}} and {mu}{sup +} {yields} e{sup +}{nu}{sub e}{bar {nu}}{sub {mu}} decay made by the LAMPF experiment E645. The appearance of {bar {nu}}{sub e} may occur from {bar {nu}}{sub {mu}} {yields} {bar {nu}}{sub e}, {nu}{sub e} {yields} {bar {nu}}{sub eL}, or {nu}{sub {mu}} {yields} {bar {nu}}{sub eL} oscillations. Appearance may also occur from rare {mu}{sup +} {yields} e{sup +}{bar {nu}}{sub e}{nu}{sub {mu}} decay, which is allowed by a multiplicative lepton charge conservation law. The neutrino energies range from E{sub {nu}} = 0 to 52.8MeV. The neutrino detector, which is located 26.1 meters from the neutrino source, consists of a segmented liquid scintillator and proportional drift tube central detector surrounded by both active and passive shielding. The central detector detects {bar {nu}}{sub e} through the {bar {nu}}{sub e}p {yields} ne{sup +} Charge Current (CC) reaction, which is signaled by the direct detection of the final state positron and neutron. The hydrogen-rich liquid scintillators act as free proton targets for the {bar {nu}}{sub e}p CC reaction. The neutrons are detected through radiative neutron capture on gadolinium. We find no evidence for {bar {nu}}{sub e} appearance …

Previous results have shown that the medium pH, the composition of the medium and concentration of medium constituents significantly affect the ratio of ethanol to acetate in the product stream when fermenting CO, CO{sub 2} and H{sub 2} in synthesis gas to products by Clostridium ljungdahlii. An additional batch study was carried out varying the agitation rate at pH 4, 4.5 and 5.0. It was speculated that increased agitation rates in combination with low pH might result in increased ethanol production while, at the same time, yielding higher cell concentrations which could eventually result in higher ethanol concentrations.

This report discusses research on the titan-1 fusion power core. The major topics covered are: titan-1 fusion-power-core engineering; titan-1 divertor engineering; titan-1 tritium systems; titan-1 safety design and radioactive-waste disposal; and titan-1 maintenance procedures.

Mixed low-level radioactive and chemically hazardous process treatment wastes from the Portsmouth Gaseous Diffusion Plant are stabilized by solidification in cement-based grouts. Conventional portland cement and fly ash grouts have been shown to be effective for retention of hydrolyzable metals (e.g., lead, cadmium, uranium and nickel) but are marginally acceptable for retention of radioactive Tc-99, which is present in the waste as the highly mobile pertechnate anion. Addition of ground blast furnace slag to the grout is shown to reduce the leachability of technetium by several orders of magnitude. The selective effect of slag is believed to be due to its ability to reduce Tc(VII) to the less soluble Tc(IV) species. 12 refs., 4 tabs.

This report discusses the following topics: overview of titan-2 design; titan-2 fusion-power-core engineering; titan-2 divertor engineering; titan-2 tritium systems; titan-2 safety design and radioactive-waste disposal; and titan-2 maintenance procedures.

A bench-scale reactor is being used to conduct studies of the conversion of synthesis gas to methanol by a novel process. During the last quarter, the effect of operating parameters such as temperature, pressure, feed H{sub 2}/CO ratio and feed flow rate on the MeOH synthesis rate were investigated. The specific rate of MeOH synthesis was found to vary with gas feed rate -- an unexpected result. It is proposed that this is due to the presence of small amounts of an inhibiting agent which accumulates in the liquid at low flow rates. Work also continued on the modification of the experimental equipment to permit on-line monitoring of liquid and gas compositions.

During 1990, we have continued our meteorological and hydrologic data collection in support of our process-oriented research. The six years of data collected to data is unique in its scope and continuity in a North Hemisphere Arctic setting. This valuable data base has allowed us to further our understanding of the interconnections and interactions between the atmosphere/hydrosphere/biosphere/lithosphere. The increased understanding of the heat and mass transfer processes has allowed us to increase our model-oriented research efforts.

The MIT Lincoln Laboratory is investigating the possibility of building a free electron laser (FEL) operating at an average power of about 7 kW at wavelengths of 500--600 nm. Additional specifications for the FEL include a bandwidth of less than 0.1 cm{sup {minus}1} and a micropulse separation of less than 10 ns. The design study has investigated the basic design parameters of the FEL including an analysis of the electron accelerator, beam line, wiggler and optical cavity. A nonlinear model of the FEL has been used to calculate the FEL gain and efficiency. The required output power appears achievable from an FEL operating at more than 1% efficiency with a conventional RF accelerator. Details of the FEL design are presented in this report which represent the final report for the year from September 1, 1989 to August 31, 1990. 28 refs., 13 figs., 5 tabs.

This report discusses the research and development on the hadron shower counter for the superconducting super collider. (LSP)

We present new developments in nonadiabatic geometric phases along two lines for systems undergoing changes of quantum state in intense fields. We first present a geometric representation of the non-Hermitian Schrodinger equation and introduce the notion of a complex multiphoton Aharonov-Anandan (AA) phase associated with dissipative two-level systems driven by periodic fields. The concept is further extended to include field modulation effects. We then develop the AA phase for spin-j systems in periodic fields and find conditions for cyclic evolution for general multi-level systems. In both cases, generalizations of the Floquet formalism lead to general analytical expressions for geometric phases that can be tested by experiments. 16 refs., 5 figs.

This paper on titan plasma engineering contains papers on the following topics: reversed-field pinch as a fusion reactor; parametric systems studies; magnetics; burning-plasma simulations; plasma transient operations; current drive; and physics issues for compact RFP reactors.

This report presents the washability and comprehensive characterization results of 543 raw coal samples collected from the Eastern Region of the United States. This is the first volume of a three-volume report on the coals of the United States. All the data are presented in six appendices. Statistical techniques and definitions are presented in Appendix A, and a glossary of terms is presented in Appendix B. The complete washability data and an in- depth characterization of each sample are presented alphbetically by state in Appendix C. In Appendix D, a statistical evaluation is given for the composited washability data, selected chemical and physical properties, and washability data interpolated at various levels of Btu recovery. This presentation is shown by state, section, and region where four or more samples were collected. Appendix E presents coalbed codes and names for the Eastern Region coals. Graphical summations are presented by state, section, and region showing the effects of crushing on impurity reductions, and the distribution of raw and clean coal samples meeting various levels of SO{sub 2} emissions. 14 refs., 27 figs., 3 tabs.

With high electron energies a kinematic regime can be reached where it will be possible to separate quasielastic and deep inelastic scattering. We present a short description of these processes which dominate the inclusive spectrum. Using the highest momentum transfer data available to guide our estimates, we give the kinematic requirements and the cross sections expected. These results indicate that inclusive scattering at high q has a yet unfilled potential. 18 refs., 13 figs.

Our nation faces significant challenges as we enter the 1990s: securing a reliable supply of competitively priced energy, improving the quality of our environment, and increasing our share of foreign markets for goods and services. The US Department of Energy's (DOE) Programs in Renewable Energy are working toward meeting these challenges by developing the technologies that make use of our nation's largest energy resource: renewable energy. The sunlight, wind biomass, flowing water, ocean energy, and geothermal energy that make up the renewable energy resource can be found throughout our nation. These resources can provide all the forms of energy our nation needs: liquid fuels, electricity, and heating and cooling. Renewable energy meets about 10% of our need for these forms of energy today, yet the potential contribution is many times greater. DOE's Programs in Renewable Energy are working side-by-side with American industry to develop the technologies that convert renewable energy resources into practical, cost-competitive energy. After a decade of progress in research, several of these technologies are poised to make large contributions during the 1990s and beyond. This booklet provides an overview of the renewable energy programs and their plans for FY 1990. Sources of additional information are listed at …

This document describes passive decay-heat removal system for a water-cooled nuclear reactor which employs a closed heat transfer loop having heat-exchanging coils inside an open-topped, insulated evaporator located inside the reactor vessel, below its normal water level, in communication with a condenser located outside of containment and exposed to the atmosphere. The heat transfer loop is located such that the evaporator is in a position where, when the water level drops in the reactor, it will become exposed to steam. Vapor produced in the evaporator passes upward to the condenser above the normal water level. In operation, condensation in the condenser removes heat from the system, and the condensed liquid is returned to the evaporator. The system is disposed such that during normal reactor operations where the water level is at its usual position, very little heat will be removed from the system, but during emergency, low water level conditions, substantial amounts of decay heat will be removed.

In the late 1970's, the Department of Energy (DOE) assigned Monsanto Research Corporation, Mound Facility, now operated by EG G Mound Applied Technologies, the responsibility for assembling and testing General Purpose Heat Source (GPHS) radioisotope thermoelectric generators (RTGs). Assembled and tested were five RTGs, which included four flight units and one non-flight qualification unit. Figure 1 shows the RTG, which was designed by General Electric AstroSpace Division (GE/ASD) to produce 285 W of electrical power. A detailed description of the processes for RTG assembly and testing is presented by Amos and Goebel (1989). The RTG performance data are described by Bennett, et al. (1986). The flight units will provide electrical power for the National Aeronautics and Space Administration's (NASA) Galileo mission to Jupiter (two RTGs) and the joint NASA/European Space Agency (ESA) Ulysses mission to study the polar regions of the sun (one RTG). The remaining flight unit will serve as the spare for both missions, and a non-flight qualification unit was assembled and tested to ensure that performance criteria were adequately met. 4 refs., 3 figs.

This report documents the results of the Environmental Monitoring Program at the Lawrence Livermore National Laboratory (LLNL) and presents summary information about environmental compliance for 1990. To evaluate the effect of LLNL operations on the local environment, measurements of direct radiation and a variety of radionuclides and chemical compounds in ambient air, soil, sewage effluent surface water, groundwater, vegetation, and foodstuff were made at both the Livermore site and at Site 300 nearly. LLNL's compliance with all applicable guides, standards, and limits for radiological and nonradiological emissions to the environment was evaluated. Aside from an August 13 observation of silver concentrations slightly above guidelines for discharges to the sanitary sewer, all the monitoring data demonstrated LLNL compliance with environmental laws and regulations governing emission and discharge of materials to the environment. In addition, the monitoring data demonstrated that the environmental impacts of LLNL are minimal and pose no threat to the public to or to the environment. 114 refs., 46 figs., 79 tabs.

The counterrotating beams in collider rings consist of trains of beam bunches with N{sub B} particles per bunch, spaced a distance S{sub B} apart. When the bunches collide, the interaction rate is determined by the luminosity, which is defined as the interaction rate per unit cross section. For head-on collisions between cylindrical Gaussian beams moving at speed {beta}c, the luminosity is given by L = N{sub B}{sup 2}{beta}c/4{pi}{sigma}{sup 2}S{sub B}, where {sigma} is the rms beam size projected onto a transverse plane (the two transverse planes are assumed identical) at the interaction point. This beam size depends on the rms emittance of the beam and the focusing strength, which is a measure of the 2-D phase-space area in each transverse plane, and is defined in terms of the second moments of the beam distribution. Our convention is to use the rms normalized emittance, without factors of 4 or 6 that are sometimes used. The quantity {tilde {beta}} is the Courant-Synder betatron amplitude function at the interaction point, a characteristic of the focusing lattice and {gamma} is the relativistic Lorentz factor. Achieving high luminosity at a given energy, and at practical values of {tilde {beta}} and S{sub B}, requires a large …