Results are presented of research and development work performed in conjunction with the 70-Mw design of a sodium-to- sodium intermediate heat exchanger and a sodium-to-water steam generator. Kanigen plating was substituted for Inconel overlays. A program to evaluate this plating was undertaken. Elimination of tube end ferrules, mechanical behavior of sine wave tubes, tube-to- tube sheet welded connections, metallurgical examination of bimetallic tubes, transition weld test, bayonet tube test, and bayonet tube weld cap test are discussed. (M.C.G.)

The study approach explored the hypothesis that regional banks can play an important role in disseminating energy conservation information to their commercial/industrial customers. The four phases of the study are described in detail. (MCW)

The development and fabrication of Pb-Te pellets, contacted to Fe end caps, for use as elements in thermoelectric converters for the SNAP 10A program, is described. The method adopted consists of contacting, by hot pressing in a controlled atmosphere, 24 pellets simultaneously, using q-layer, 8-cavity graphite dies. The optimum hot pressing parameters were found to be 5000 psi at 1550 deg F for 30 min. Several thousand elements were produced by this relatively high-volume process, modifying the normally slow and expensive hot pressing by the use of multilayer, multicavity dies and automatic controls. (auth)

Materials recovery and energy recovery from municipal solid waste, offering at least a partial solution to a city's solid waste management and disposal problem, are discussed. The most important barriers and issues which relate to energy and materials recovery from waste in urban areas are discussed. Energy recovery practices and processes, environmental issues, and municipal market economics are considered. (MCW)

Activities during the period were directed primarily toward determination of the engineering properties of hydrided materials. The tensile strength and elongation, thermal expansion, thermal conductivity, and heat capacity of ZrH were determined as functions of temperature and H content. Preliminary results of Ti-base material studies indicate that these materials can be used for shielding and structural materials with the incorporation of rare earth hydrides. A summary of the work from Oct. l958 to Sept. 1959 is included. (J.R.D.)

The measurements, data reduction, and analysis contained herein are for the most part preliminary. The instrumentation system for dynamic measurements was not completed and so the measurements taken were in the static mode and a limited amount of instruments was used. Most of these preliminary measurements were made to characterize the losses in the roadway and the pickup of the dynamic RPEV system. By analysis of power, voltage, current and impedance-bridge measurements (at 100 Hz and 1000 Hz), the equivalent series resistance (ESR) and equivalent parallel resistance (EPR) of the roadway and pickup inductances and capacitances were derived. Separation of the inductive and capacitive losses was difficult because of the large ratio of stored energy to power loss, that is, the Q of each of these system elements, and the separation was accomplished by modeling the system losses and making a least-squares fit to the model with the test data. The bridge data was used primarily for capacitance and inductance values and the ESR or EPR data were not analyzed.

The summaries in this bulletin cover both secondary and tertiary recovery of petroleum and the following topics under Oil Shales and Tar Sands: reserves and exploration; site geology and hydrology; drilling, fracturing, and mining; oil production, recovery, and refining; properties and composition; direct uses and by-products; health and safety; marketing and economics; waste research and management; environmental aspects; and regulations. These summaries and older citations to information on petroleum, oil shales, and tar sands back to the 1960's are available for on-line searching and retrieval on the Energy Data Base using the DOE/RECON system or commercial on-line retrieval systems. Retrospective searches can be made on any aspect of petroleum, oil shales, or tar sands, or customized profiles can be developed to provide current information for each user's needs.

We consider here the nebular phase spectra of supernovae whose late time luminosity is provided by the radioactive decay of /sup 56/Ni and /sup 56/Co synthesized in the explosion. A broad variety of supernovae are known or suspected to fall in this category. This includes all SNIa and SNIb, and at least some SNII, in particular SN1987a. At sufficiently late times the expanding supernova becomes basically nebular in character due to its decreasing optical depth. The spectra produced during this stage contain information on the density and abundance structure of the entire supernova, as opposed to spectra near maximum light which are affected only by the outermost layers. A numerical model for nebular spectrum formation is therefore potentially very valuable for answering currently outstanding questions about the post-explosion supernova structure. As an example, we can hope to determine the degree of mixing which occurs between the layers of the ''onion-skin'' abundance structure predicted by current one dimensional explosion calculations. In the sections which follow, such a numerical model is briefly described and then applied to SN1972e, a typical SNIa, SN1985f, an SNIb, and finally to SN1987a. In the case of SN1987a predicted spectra are presented for the wavelength range from …

The Infrared Thermometer (IRT) is a ground-based radiation pyrometer that provides measurements of the equivalent blackbody brightness temperature of the scene in its field of view. The downwelling version has a narrow field of view for measuring sky temperature and for detecting clouds. The upwelling version has a wide field of view for measuring the narrowband radiating temperature of the ground surface.

This project was a collaborative effort between Dr Teresa Burns and Dr John Larese to study the physisorption of polar molecules on ionic substrates. The work will be completed at both Coastal Carolina University and Brookhaven National Laboratory. The goals of the research are: 1) to provide detailed thermodynamic information about dipolar molecules adsorbed on ionic substrates, critical to accurately modeling the systems of interest using a spin-1 Ising model; 2) to study the structure of the adsorbed layer from the gas phase, experimentally verifying the application of the model to these systems; 3) to extend the modeling studies and structural measurements to systems adsorbed from the liquid phase. The systems will be studied using thermodynamic techniques, e.g., adsorption isotherm both from the gas and liquid phase, and x-ray structural measurements. This project will strengthen the physical science research efforts at CCU, and hence in South Carolina.

Previous Bechtel National, Incorporated (BNI)-sponsored studies have targeted optimizing sodium permanganate for the selective oxidation of chromium from washed Hanford tank sludges (Rapko et al. 2004; Rapko et al. 2005). The recommendation from previous work was that contact with sodium permanganate in a minimally caustic solution, i.e., 0.1 to 0.25 M [OH-] initially, provided maximum Cr dissolution while minimizing concomitant Pu dissolution. At the request of BNI, further work on oxidative alkaline leaching was performed.

It is well known that U-6wt.% Nb (U-14at.% Nb) alloy has a microstructure containing martensitic phases supersaturated with Nb that can be obtained by rapid quenching the alloy from {gamma} (bcc)-field solid solution to room temperature. The high cooling rate forces the {gamma}-phase solid solution to transform to variants of the low-temperature {alpha} (orthorhombic) phase in which Nb is forced to retain in the supersaturated solid solution. However, the crystal lattice of supersaturated solution formed by rapid quenching is in unstable conditions and is severely distorted since the solubility of Nb in the {alpha} phase at room temperature is nearly zero under an equilibrium condition. Two variant phases, a monoclinic distortion of {alpha} phase that is designated as {alpha}{double_prime} martensite and a tetragonal distortion of {gamma} phase that is designated as {gamma}{sup o} phase, can form in the as-quenched alloy, as shown in Fig. 1. We have learned from our previous TEM studies on the low-temperature aging of a water-quenched U6Nb (WQ-U6Nb) alloy that there are two possible transformation pathways for phase decomposition of the alloy supersaturated with 14 at.% of Nb upon aging at temperatures below 200 C, i.e., (1) supersaturated solid solution {alpha}{double_prime} {yields} spinodal decomposition {yields} {alpha}{sub …

A subcritical facility driven by an electron accelerator is planned at the Kharkov Institute of Physics and Technology (KIPT) in Ukraine for medical isotope production, materials research, training, and education. The conceptual design of the facility is being pursued through collaborations between ANL and KIPT. As part of the design effort, the high-fidelity analyses of various target options are performed with formulations to reflect the realistic configuration and the three dimensional geometry of each design. This report summarizes the results of target design optimization studies for electron beams with two different beam profiles. The target design optimization is performed via the sequential neutronic, thermal-hydraulic, and structural analyses for a comprehensive assessment of each configuration. First, a target CAD model is developed with proper emphasis on manufacturability to provide a basis for separate but consistent models for subsequent neutronic, thermal-hydraulic, and structural analyses. The optimizations are pursued for maximizing the neutron yield, streamlining the flow field to avoid hotspots, and minimizing the thermal stresses to increase the durability. In addition to general geometric modifications, the inlet/outlet channel configurations, target plate partitioning schemes, flow manipulations and rates, electron beam diameter/width options, and cladding material choices are included in the design optimizations. The …

The factors affecting the optimal water chemistry of the Savannah River Site spent fuel storage basin must be determines in order to optimize facility efficiency, minimize fuel corrosion, and reduce overall environmental impact from long term spent nuclear fuel storage at the Savannah River Site. The Savannah River National Laboratory is using statistically designed experiments to study the effects of NO{sub 3}{sup -}, SO{sub 4}{sup 2-}, and Cl{sup -} concentrations on alloys commonly used not only as fuel cladding, but also as rack construction materials The results of cyclic polarization pitting and corrosion experiments on samples of Al 6061 and 1100 alloys will be used to construct a predictive model of the basin corrosion and its dependence on the species in the basin. The basin chemistry model and corrosion will be discussed in terms of optimized water chemistry envelope and minimization of cladding corrosion.

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement (ARM) Climate Research Facility (ACRF) instrumentation status. The report is divided into the following four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) SBIR instrument development.

None

We present a second-order accurate algorithm for solving thefree-space Poisson's equation on a locally-refined nested grid hierarchyin three dimensions. Our approach is based on linear superposition oflocal convolutions of localized charge distributions, with the nonlocalcoupling represented on coarser grids. There presentation of the nonlocalcoupling on the local solutions is based on Anderson's Method of LocalCorrections and does not require iteration between different resolutions.A distributed-memory parallel implementation of this method is observedto have a computational cost per grid point less than three times that ofa standard FFT-based method on a uniform grid of the same resolution, andscales well up to 1024 processors.

The authors present preliminary measurements of time-dependent CP-violation parameters in the decay B{sup 0} {yields} {omega}K{sub S}{sup 0}, B{sup 0} {yields} {eta}{prime}K{sup 0}, B{sup 0} {yields} {pi}{sup 0}K{sub S}{sup 0}, B{sup 0} {yields} {phi}K{sub S}{sup 0}{pi}{sup 0}, and B{sup 0} {yields} K{sup +}K{sup -}K{sub S}{sup 0}, which includes the resonant final states {phi}K{sub S}{sup 0} and f{sub 0}(980)K{sub S}{sup 0}. The data sample corresponds to the full BABAR dataset of 467 x 10{sup 6} B{bar B} pairs produced at the PEP-II asymmetric-energy E{sup +}e{sup -} collider at the Stanford Linear Accelerator Center.

On October 30, 2007, the U.S. Department of Energy’s (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility (ACRF) sponsored an all-day workshop to assess the status of the ACRF Archive. Focus areas included usability of current functions, plans for revised functions, proposals for new functions, and an overarching discussion of new ideas. Although 13 scientists familiar with ACRF and the ARM Program were invited to the workshop, only 10 scientists were available to attend the workshop. ACRF consists of the infrastructure that was developed to support the ARM Program and includes the ACRF Archive (previously called the ARM Archive). The scientists who participated in the meeting ranged from those who used the Archive frequently to those who seldom or never had accessed the Archive. The group was spread across disciplines, i.e. modelers, conservationists, and others from universities and government laboratories. A few of the participants were funded by the ARM Program, but most were not funded currently by ARM. During the past year, several improvements were made to the ACRF Archive to link it with the ARM/ACRF web pages, add a shopping cart feature, and expand on search parameters. Additional modifications have been proposed and prototypes of these proposals were …

The analysis of coherent structures in Rayleigh-Taylor simulations is a challenging task as the lack of a precise definition of these structures is compounded by the massive size of the datasets. In an earlier work, we used techniques from image analysis to count these coherent structures in two high-resolution simulations, one a large-eddy simulation with 30 terabytes of analysis data, and the other a direct numerical simulation with 80 terabytes of analysis data. Our analysis indicated that there were four distinct regimes in the process of the mixing of the two fluids, starting from the initial linear stage, followed by the non-linear stage with weak turbulence, the mixing transition stage, and the final stage of strong turbulence. In this paper, we extend our earlier work to focus on only the rising bubbles and the falling spikes. We first consider different ways in which we can constrain the bubble and spike definitions and then extract various statistics on them. Our results on the rising bubble and falling spike counts again show that there are four regimes in the process of fluid mixing, each characterized by an integer-valued slope. Further, the average bubble heights and spike depths are related to similar results …

We present a modification of the closed-loop state space model for AO control which allows delays that are a non-integer multiple of the system frame rate. We derive the new forms of the Predictive Fourier Control Kalman filters for arbitrary delays and show that they are linear combinations of the whole-frame delay terms. This structure of the controller is independent of the delay. System stability margins and residual error variance both transition gracefully between integer-frame delays.

This document reports the results of electrochemical corrosion tests on AS1S Grade 60 carbon steel coupons exposed to tank 241-AY-102 sludge under conditions similar to those near the bottom of the tank. The tests were performed to evaluate the corrosive behavior of the waste in contact with sludge that does not meet the chemistry control limits of Administrative Control (AC) 5.15, Corrosion Mitigation Program.

The Atmospheric Radiation Measurement (ARM) Program has matured into one of the key programs in the U.S. Climate Change Science Program. The ARM Program has achieved considerable scientific success in a broad range of activities, including site and instrument development, atmospheric radiative transfer, aerosol science, determination of cloud properties, cloud modeling, and cloud parameterization testing and development. The focus of ARM science has naturally shifted during the last few years to an increasing emphasis on modeling and parameterization studies to take advantage of the long time series of data now available. During the next 5 years, the principal focus of the ARM science program will be to: • Maintain the data record at the fixed ARM sites for at least the next five years. • Improve significantly our understanding of and ability to parameterize the 3-D cloud-radiation problem at scales from the local atmospheric column to the global climate model (GCM) grid square. • Continue developing techniques to retrieve the properties of all clouds, with a special focus on ice clouds and mixed-phase clouds. • Develop a focused research effort on the indirect aerosol problem that spans observations, physical models, and climate model parameterizations. • Implement and evaluate an operational …

The primary goal of our research this spring/ summer was to refine techniques and examine scenarios under which a standardized protocol could be applied to assess juvenile coho salmon (O. kisutch) passage through road culverts. Field evaluations focused on capture-mark- recapture methods that allowed analysis of fish movement patterns, estimates of culvert passability, and potential identification of cues inducing these movements. At this stage, 0+ age coho salmon fry 30 mm to 65 mm long (fork length) were the species and age class of interest. Ultimately, the protocol will provide rapid, statistically rigorous methods for trained personnel to perform standardized biological assessments of culvert passability to a number of juvenile salmon species. Questions to be addressed by the research include the following: ? Do hydraulic structures such as culverts restrict habitat for juvenile salmonids? ? How do existing culverts and retrofits perform relative to juvenile salmonid passage? ? Do some culvert characteristics and hydraulic conditions provide better passage than others? ? Does the culvert represent a barrier to certain size classes of fish? Recommendations addressed issues of study site selection, initial capture, marking, recapture/observations, and estimating movement.