The 100-B-20 waste site, located in the 100-BC-1 Operable Unit of the Hanford Site, consisted of an underground oil tank that once serviced the 1716-B Maintenance Garage. The selected action for the 100-B-20 waste site involved removal of the oil tanks and their contents and demonstrating through confirmatory sampling that all cleanup goals have been met. In accordance with this evaluation, a reclassification status of interim closed out has been determined. The results demonstrate that the site will support future unrestricted land uses that can be represented by a rural-residential scenario. These results also show that residual concentrations support unrestricted future use of shallow zone soil and that contaminant levels remaining in the soil are protective of groundwater and the Columbia River.

The reprocessing of commercial spent nuclear fuel (SNF) generates a Zircaloy cladding hull waste which requires disposal as a high level waste in the geologic repository. The hulls are primarily contaminated with fission products and actinides from the fuel. During fuel irradiation, these contaminants are deposited in a thin layer of zirconium oxide (ZrO{sub 2}) which forms on the cladding surface at the elevated temperatures present in a nuclear reactor. Therefore, if the hulls are treated to remove the ZrO{sub 2} layer, a majority of the contamination will be removed and the hulls could potentially meet acceptance criteria for disposal as a low level waste (LLW). Discard of the hulls as a LLW would result in significant savings due to the high costs associated with geologic disposal. To assess the feasibility of decontaminating spent fuel cladding hulls, two treatment processes developed for dissolving fuels containing zirconium (Zr) metal or alloys were evaluated. Small-scale dissolution experiments were performed using the ZIRFLEX process which employs a boiling ammonium fluoride (NH{sub 4}F)/ammonium nitrate (NH{sub 4}NO{sub 3}) solution to dissolve Zr or Zircaloy cladding and a hydrofluoric acid (HF) process developed for complete dissolution of Zr-containing fuels. The feasibility experiments were performed using Zircaloy-4 …

We describe an asymptotic analysis of the coupled nonlinear system of equations describing time-dependent three-dimensional monoenergetic neutron transport and isotopic depletion and radioactive decay. The classic asymptotic diffusion scaling of Larsen and Keller [1], along with a consistent small scaling of the terms describing the radioactive decay of isotopes, is applied to this coupled nonlinear system of equations in a medium of specified initial isotopic composition. The analysis demonstrates that to leading order the neutron transport equation limits to the standard time-dependent neutron diffusion equation with macroscopic cross sections whose number densities are determined by the standard system of ordinary differential equations, the so-called Bateman equations, describing the temporal evolution of the nuclide number densities.

The objective of this report is to determine the allowed inventory of chemicals stored in the same bay, building or magazine, i.e., in close proximity, with high explosives (HE) that would, in the event of an accident, result in acceptable risks to colocated workers and the public.

The galaxy cluster 1E0657-56 (z = 0.296) is remarkably well-suited for addressing outstanding issues in both galaxy evolution and fundamental physics. We present a reconstruction of the mass distribution from both strong and weak gravitational lensing data. Multi-color, high-resolution HST ACS images allow detection of many more arc candidates than were previously known, especially around the subcluster. Using the known redshift of one of the multiply imaged systems, we determine the remaining source redshifts using the predictive power of the strong lens model. Combining this information with shape measurements of ''weakly'' lensed sources, we derive a high-resolution, absolutely-calibrated mass map, using no assumptions regarding the physical properties of the underlying cluster potential. This map provides the best available quantification of the total mass of the central part of the cluster. We also confirm the result from Clowe et al. (2004, 2006a) that the total mass does not trace the baryonic mass.

Provides an overview of plug-in hybrid electric vehicle (PHEV) design options and expectations.

Several active interrogation techniques are being developed to detect shielded special nuclear materials (SNM) hidden in cargo containers loaded on container ships arriving at US ports. It raises the questions of the types of cargos in which SNM could be hidden, and their impact on detected signatures. Since the definition of a set of ''typical'' or standard cargos has proven to be difficult, we analyzed shipping manifests for US imports shipped through North American ports collected on 14 days distributed over 12 months. From these data, we generated several distribution functions such as commodity categories, average densities, and packaging types that could be of interest to the cargo scanning community. One of the cargo scanning techniques currently under development at LLNL is based on neutron active interrogation, and relies on the unique signature of beta-delayed gammas emitted by fission products in the 3 to 7 MeV energy range. {sup 19}F(n,a){sup 16}N, has been identified as the main potential interference for 7 and 9 MeV neutron beams. Estimates of cargo compositions based on manifests identified as containing fluorine are presented.

The majority of radiation from galaxies containing active galactic nuclei (AGNs) is emitted not by the stars composing the galaxy, but from an active source at the galactic center, most likely a supermassive black hole. Of particular interest are radio galaxies, the active galaxies emitting much of their radiation at radio wavelengths. Within each radio galaxy, an AGN powers a pair of collimated jets of relativistic particles, forming a pair of giant lobes at the end of the jets and thus giving a characteristic double-lobed appearance. A particular class of radio galaxies have an ''X''-shaped morphology: in these, two pairs of lobes appear to originate from the galactic center, producing a distinctive X-shape. Two main mechanisms have been proposed to explain the X-shape morphology: one being through the merger of a binary supermassive black hole system and the second being that the radio jets are expanding into an asymmetric medium. By analyzing radio host galaxy shapes, we probe the distribution of the stellar mass to compare the differing model expectations regarding the distribution of the surrounding gas and stellar material about the AGN.

Edge localized mode (ELM) control is a critical issue for ITER because the impulsive power loading from ELMs is predicted to limit the divertor lifetime to only a few hundred full-length pulses. Consequently, a technique that replaces the ELM-induced transport with more continuous transport while preserving the H-mode pedestal height and core performance would significantly improve the viability of ITER. One approach is to use edge resonant magnetic perturbations (RMPs) to enhance pedestal transport enough to reduce the pedestal pressure gradient {del}p{sub ped} below the stability limit for Type I ELMs. In DIII-D, n = 3 RMPs have been used to eliminate Type I ELMs when the edge safety factor is in the resonant window q95 {approx} 3.5 without degrading confinement in H-modes with ITER-relevant pedestal collisionalities v*{sub e} {approx} 0.2. The RMP reduces {del}p{sub ped} as expected, with {del}p{sub ped} controlled by the RMP amplitude. Linear peeling-ballooning (P-B) stability analysis indicates that the ELMs are suppressed by reducing {del}p{sub ped} below the P-B stability limit. The {del}p{sub ped} reduction results primarily from an increase in particle transport, not electron thermal transport. This result is inconsistent with estimates based on quasi-linear stochastic diffusion theory based on the vacuum field (no …

We present new weak lensing observations of 1E0657-558 (z = 0.296), a unique cluster merger, that enable a direct detection of dark matter, independent of assumptions regarding the nature of the gravitational force law. Due to the collision of two clusters, the dissipationless stellar component and the fluid-like X-ray emitting plasma are spatially segregated. By using both wide-field ground based images and HST/ACS images of the cluster cores, we create gravitational lensing maps which show that the gravitational potential does not trace the plasma distribution, the dominant baryonic mass component, but rather approximately traces the distribution of galaxies. An 8{sigma} significance spatial offset of the center of the total mass from the center of the baryonic mass peaks cannot be explained with an alteration of the gravitational force law, and thus proves that the majority of the matter in the system is unseen.

This document describes a Computed Tomography (CT) reconstruction code called CCG-LCONE. CCG-LCONE is used to reconstruction objects from projections acquired on a cone beam radiographic system. This document will describe in brief the theory behind parts of the code, as well as detail the structure of the code, so it will function as both a ''User's Guide and a Programmer's Guide''. The Introduction will describe CT in general and cone beam systems in particular. It will explain why CCG-LCONE was developed and give an overview of the design and function. This report discusses the various parts of the system, both theory and code structure.

None

With the BABAR detector at the PEP-II asymmetric B Factory at SLAC, they present the first search for the decays B{sup 0} {yields} {ell}{sup +}{ell}{sup -}{gamma} ({ell} = e, {mu}). Using a data set of 292 fb{sup -1} collected at the {Upsilon}(4S) resonance, they find no significant signal and set the following branching fraction upper limits at 90% confidence level: {Beta}(B{sup 0} {yields} e{sup +}e{sup -}{gamma}) < 0.7 x 10{sup -7} and {Beta}(B{sup 0} {yields} {mu}{sup +}{mu}{sup -}{gamma}) < 3.4 x 10{sup -7}.

The BaBar drift chamber (DCH) is used to measure the properties of charged particles created from e{sup +}e{sup -} collisions in the PEP-II asymmetric-energy storage rings by making precise measurements of position, momentum and ionization energy loss (dE/dx). In October of 2005, the PEP-II storage rings operated with a luminosity of 10 x 10{sup 33} cm{sup -2}s{sup -1}; the goal for 2007 is a luminosity of 20 x 10{sup 33} cm{sup -2}s{sup -1}, which will increase the readout dead time, causing uncertainty in drift chamber measurements to become more significant in physics results. The research described in this paper aims to reduce position and dE/dx uncertainties by improving our understanding of the BaBar drift chamber performance. A simulation program--called GARFIELD--is used to model the behavior of the drift chamber with adjustable parameters such as gas mixture, wire diameter, voltage, and magnetic field. By exploring the simulation options offered in GARFIELD, we successfully produced a simulation model of the BaBar drift chamber. We compared the time-to-distance calibration from BaBar to that calculated by GARFIELD to validate our model as well as check for discrepancies between the simulated and calibrated time-to-distance functions, and found that for a 0{sup o} entrance angle there …

Iron L-edge, iron K-edge, and sulfur K-edge X-ray absorption spectroscopy was performed on a series of compounds [Fe{sup III}H{sub 3}buea(X)]{sup n-} (X = S{sup 2-}, O{sup 2-}, OH{sup -}). The experimentally determined electronic structures were used to correlate to density functional theory calculations. Calculations supported by the data were then used to compare the metal-ligand bonding and to evaluate the effects of H-bonding in Fe{sup III}-O vs Fe{sup III-}S complexes. It was found that the Fe{sup III-}O bond, while less covalent, is stronger than the FeIII-S bond. This dominantly reflects the larger ionic contribution to the Fe{sup III-}O bond. The H-bonding energy (for three H-bonds) was estimated to be -25 kcal/mol for the oxo as compared to -12 kcal/mol for the sulfide ligand. This difference is attributed to the larger charge density on the oxo ligand resulting from the lower covalency of the Fe-O bond. These results were extended to consider an Fe{sup IV-}O complex with the same ligand environment. It was found that hydrogen bonding to Fe{sup IV-}O is less energetically favorable than that to Fe{sup III-}O, which reflects the highly covalent nature of the Fe{sup IV-}O bond.

The paper presents the first attempt to estimates the ILC damping ring impedance and compare thresholds of the classical instabilities for several designs initially proposed for the DR. The work was carried out in the spring of 2006. Since then the choice of the DR is narrowed. Nevertheless, the analysis described may be useful for the next iterations of the beam stability. Overall, the conventional instabilities will have little impact on the ring performance provided the careful design of the ring minimizes the impedance below acceptable level indicated above. The only exception is the transverse CB instability. The longitudinal CB is less demanding. However, even the transverse CB instability would have threshold current above nominal provided the aperture in the wigglers is increased from 8 mm to 16 mm. The microwave instability needs more studies. Nevertheless, we should remember that the ILC DR is different from existing high-current machines at least in two respects: absence of the beam-beam tune spread stabilizing beams in colliders, and unusual strict requirements for low emittance. That may cause new problems such as bunch emittance dilution due to high-frequency wakes (BPMs, grooves), etc. Even if such a possibility exists, it probably universal for all machines …

Theoretical studies and simulations predict that with a very short and very intense coherent X-ray pulse a single diffraction pattern may be recorded from a large macromolecule, a virus, or a cell without the need for crystalline periodicity. Measurement of the over-sampled X-ray diffraction pattern permits phase retrieval and hence structure determination. Although individual samples will be destroyed by the very intense X-ray pulse, a three-dimensional data set could be assembled when copies of a reproducible sample are exposed to the beam one by one. The challenges in carrying out such an experiment requires an interdisciplinary approach, drawing upon structural biology, atomic and plasma physics, mathematics, statistics, and XFEL physics. The potential for breakthrough science in this area is great with impact not only in the biological areas but wherever structural information at or near atomic resolution on the nanoscale is valuable.

This article reports world averages for measurements on b-hadron properties obtained by the Heavy Flavor Averaging Group (HFAG) using the available results as of at the end of 2005. In the averaging, the input parameters used in the various analyses are adjusted (rescaled) to common values, and all known correlations are taken into account. The averages include lifetimes, neutral meson mixing parameters, parameters of semileptonic decays, branching fractions of B decays to final states with open charm, charmonium and no charm, and measurements related to CP asymmetries.

None

The measurement of the branching fraction of the flavor changing neutral current B {yields} X{sub s}{gamma} transition can be used to expose physics outside the Standard Model. In order to make a precise measurement of this inclusive branching fraction, it is necessary to be able to effectively separate signal and background in the data. In order to achieve better separation, an algorithm based on Boosted Decision Trees (BDTs) is implemented. Using Monte Carlo simulated events, ''forests'' of trees were trained and tested with different sets of parameters. This parameter space was studied with the goal of maximizing the figure of merit, Q, the measure of separation quality used in this analysis. It is found that the use of 1000 trees, with 100 values tested for each variable at each node, and 50 events required for a node to continue separating give the highest figure of merit, Q = 18.37.

A cement based waste form was evaluated to determine the rates at which various organics were released during heating caused by the cementitious heat-of-hydration reaction. Saltstone is a cement-based waste form for the disposal of low-level salt solution. Samples were prepared with either Isopar{reg_sign} L, a long straight chained hydrocarbon, or (Cs,K) tetraphenylborate, a solid that, upon heating, decomposes to benzene and other aromatic compounds. The saltstone samples were heated over a range of temperatures. Periodically, sample headspaces were purged and the organic constituents were captured on carbon beds and analyzed. Isopar{reg_sign} L was released from the saltstone in a direct relationship to temperature. An equation was developed to correlate the release rate of Isopar{reg_sign} L from the saltstone to the temperature at which the samples were cured. The release of benzene was more complex and relied on both the decomposition of the tetraphenylborate as well as the transport of the manufactured benzene through the curing saltstone. Additional testing with saltstone prepared with different surface area/volume also was performed.

This paper reports on a recent benchmark calculation in the four-nucleon system, aimed at investigating the reliability of the no-core shell model (NCSM) approach to the description of inclusive response functions via the Lorentz integral transform (LIT) method.

Complex engineering elastomeric materials are often characterized by a complex network structure obtained by crosslinking network chains with multiple chain lengths. Further, these networks are commonly filled with thixotropic reinforcing agents such as SiO{sub 2} or carbon black. Degradation of such materials often occurs via mechanisms that alter the fundamental network structure. In order to understand the effects of modifications of network structure and filler-polymer interaction on component performance, a series of model compounds have been studied by {sup 1}H multiple quantum NMR analysis and traditional mechanical property assessments. The {sup 1}H NMR data provides insight into the distribution of segmental dynamics that reveals insight into the changes in mechanical properties.

In an effort to develop a magnetic resonance based diagnostic tool to be used for polymer production and surveillance, we have investigated the use of magnetic resonance imaging (MRI) and unilateral relaxometry. MRI provides a spatial map of the polymer, which can be correlated to the structure heterogeneity. Though highly detailed information can be obtained with MRI, the high equipment cost and expertise required to operate the system makes it a poor choice for a production setting. Unilateral relaxometry via the NMR MOUSE provides rapid, inexpensive polymer screening, useful in the development in new polymer parts or to identify potentially defective components. The NMR ProFiler (originally called the NMR MOUSE) was procured by Kansas City originally for production support of the W80 LEP with future applications as a surveillance diagnostic. A robotic autosampler has been designed allowing the detection of several components without the need for any human interaction. A summary of the qualification experiments and results to date from the ProFiler and the robotic unit will be presented.