Report presenting an investigation of the effects of tip-mounted jet-engine nacelles on the aerodynamic characteristics of low-aspect-ratio rectangular and tapered wings using the transonic-bump technique. The effect of the tip-mounted nacelles was generally to increase the lift-curve slopes for wings of aspect ratio 2 or larger with upper or lower mounted nacelles causing larger increases than symmetrically mounted nacelles. Results regarding rectangular wings and tapered wings are provided.

Report presenting tests of the aerodynamic characteristics of two delta wings of the same aspect ratio and airfoil sections at Mach number 4.04. The results indicated that the ratio of the experimental lift-curve slope to the theoretical two-dimensional lift-curve slope from previous testing is valid at this Mach number.

"The relation between the elevator hinge-moment parameters and the control-forces for changes in forward speed and in maneuvers is shown for several values of static stability and elevator mass balance. The stability of the short-period oscillations is shown as a series of boundaries giving the limits of the stable region in terms of the elevator hinge-moment parameters. The effects of static stability, elevator moment of inertia, elevator mass unbalance, and airplane density are also considered" (p. 1).

From Summary: "An investigation of a vortex-generator configuration on the wings of a l/4-scale model of the X-1 airplane having a 10-percent-thick wing was conducted in the Langley 16-foot transonic tunnel. The effect of the vortex generators was determined by comparing the model aerodynamic characteristics, wing-pressure distributions, and wing-wake patterns for model configurations with and without vortex generators on the wings. Results are presented from tests at 0.1 increments in Mach number from about 0.69 to 0.99, at Reynolds numbers of about 4.1 x 10(exp 6) to 4.7 x 10(exp 6), and through an angle-of-attack range up to 1.5 deg at lower speeds and up to 5 deg at the highest speed."

"This report presents the results of tests made on three sizes of roots type aircraft engine superchargers. The impeller contours and diameters of these machines were the same, but the length were 11, 8 1/4, and 4 inches, giving displacements of 0.509, 0.382, and 0.185 cubic foot per impeller revolution. The information obtained serves as a basis for the examination of the individual effects of impeller speed and displacement on performance and of the comparative performance when speed and displacement are altered simultaneously to meet definite service requirements" (p. 3).