Recently proposals for justifiable additions to the Plutonium Recycle Test Reactor Complex were presented to the Atomic Energy Commission at their request. In addition to a critical reactivity measuring facility in the fuel element storage basin, the following in-reactor loops were proposed: 1. A high pressure, H2O cooled fuel test loop. 2. A rupture loop to investigate fuel element failures. 3. One or more materials testing loops.

Females heterozygous for a wildtype X chromosome from a Samarkand stock and an chromosome of the composition [formula] were tested for the frequency of X-chromosomal non-disjunction and segregation of the X's when Y chromosomes of different types were present in the females. The Y chromosomes used were 1) a normal unmarked Y, 2) [formula], 3) [formula] and 4) [formula] (a chromosome which arose in one of our experiments and has not yet been analyzed). Since this was only a preliminary test no attempt was made to isogenize the stocks. Larger scale experiments are planned in which these and other Y's will be used and the genetic background will be strictly controlled.

The effect of temperature on the yield strength of the polycrystalline hexagonal Ag-Al intermetallic phase was investigated over the temperature range 77 to 775 K. It was found that the curve for yield stress vs temperature for both polycrystalline Ag-33 at .% Al specimens that were heavily cold worked prior to deformation and those that were recrystallized prior to deformation was parallel to that for prismatic slip in single crystals.

The recently developed "n" on "p" type silicon solar cell has been evaluated for application as a high-level gamma radiation dose rate meter. The solar cell ionization current was found to be a linear function of dose rate in a range 10 2 to 10 7 rads per hour. A degradation rate of approximately one per cent per megarad was measured after stabilization with twenty megarads of cobalt-60 gamma radiation. The system has proven to be stable over long periods of time. Temperature dependence corrections have been found to be .0 per cent per degree centigrade between 0 and 60 degree centigrade.

Summary. A test rig has been designed to obtain basic two phase forced convection liquid metal heat transfer and pressure drop data for use in the design of liquid metal boilers. This engineering report includes background of the boiling problem, partial summary of work done by other investigators, the object, scope, engineering, and operations of this test rig, and a summary of reproducibility tests conducted in a water back-up rig.

This bibliography contains 20 references on the use of ultrasonic in electrodeposition and electroplating. The bibliography is limited to the period 1955 to 1959, with the references arranged alphabetically by title. Sources used in compiling this bibliography were: Applied Science and Technology Index, ASM Review of Metal Literature, Chemical Abstracts, Industrial Arts, Index, Nuclear Science Abstracts.

Stresses set up by an insulating strip in the bond are estimated and found to be small compared to those normally present without the defect.

Abstract. The thermal conductivity of uranium as a function of temperature is measured by comparing its conductivity with that of a sample of brass. An absolute measurement is then made of the conductivity of the brass sample. The thermal conductivities as a function of temperature of two samples of extruded uranium rod are given.

Abstract. A neutron diffraction crystal spectrometer with a resolution of 13 microseconds per meter and monochromatic beam intensity up to 10(4)n/cm(2)=sec in the range 0.012-0.400 ev has been constructed for study of the activation cross section of Be7 as a function of energy in the thermal region. First preliminary results using ZnS(Ag) as a detector suggest the possibility of a resonance for the Be7(n,p)Li7 reaction in the region of 0.025-0.050 ev.

A two-etchant surface preparation treatment has been found which insures good adhesion between the zirconium and the nickel or copper electroplate. The etching process requires 1 1/2 minutes.

In connection with the development of in-line analytical equipment for monitoring pH, gamma activity and uranium concentration in process streams, experiments and tests were carried out during the past year and a half in the Metal recovery Plant on a pH monitor for the hydrogen ion concentration in neutralized waste, a continuous gamma activity monitor on the RCU, an automatic photometer for uranium in RAF, and an automatic polarograph for uranium in RAW. This letter is written to present up-to-date diagrams of the equipment used, outline briefly the studies conducted and the main conclusions regarding design and operability of the equipment, and present material which will supplement that included in the previous reports on theses instruments.

A metallurgical examination of several resistance thermometers for 105-KW were examined before startup (1). This examination revealed that the silver brazes joining the type 305 stainless steel blades to the type 416 stainless steel nuts were defective. The braze metal did not penetrate into the joint; the brazes were porous and appeared to be inadequately bonded to the type 416 nuts. After startup of KW, many of the thermometers became inoperative, and several were visually examined to determine the integrity of the units. The presence of corrosion products at the junction of the braze and the nut led to further metallurgical examination of the brazed joints. Twenty units from 105-KW, 12 prototype units from 105-H, and two "new model" units were included in this examination. The examination was conducted to determine the cause and nature of the failures observed on units under service conditions.

Most existing electron synchrotrons use betatron start for initial acceleration of the particles. The subsequent synchrotron acceleration is then performed with a nearly constant radio-frequency. Investigation of the effect of turn-on rate and initial energy spread is made mathematically. Several advantages are seen for such a technique. (D.C.W.)

Experience in handling and purifying rubidium metal, prior to high-temperature corrosion testing, has been obtained. Some of the physical and chemical properties of this metal are listed. Distillation and filtration experiences are described, and the analysis of samples following such purification procedures are given. Stripping procedures following corrosion testing are discussed briefly. Results of preliminary corrosion experiments indicate that Inconel in a satisfactory container material for boiling rubidium at temperatures up to 1520°F.

Technical report covering the Homogeneous Reactor Experiment (HRE) reactor physics and engineering, out-of-pile corrosion, in-pile studies, recombination of hydrogen and oxygen, HRE chemical studies, experimental programs for the HRE, and long-range studies. [From Summary]

The descriptive parameters of a waveguide with smooth or periodic structure are most easily measured in a waveguide section of suitable length which is transformed into a resonant cavity by placing short circuits at both ends. Measurements of dispersion diagram, phase velocity, group velocity, voltage attenuation coefficient, shunt impedance, field configuration, etc. all involve some form of perturbation technique. The introduction of a perturbing object in a resonant cavity changes the stored electric energy We and magnetic energy Wm by Δwe and ΔWm' resulting in a frequency shift Δf of the resonant frequency f, which is given by the perturbation formula of J. Muller.

The Brookhaven Bubble Chamber Group is developing a Hough-Powell fast analysis system (HPD)1 for bubble chamber photographs. High precision measurements are made with a computer controlled flying spot digitizer. We are currently testing the track selection programs for the system. We have just completed a study of a method for automatic bubble density measurements.

Report of progress on the metabolic properties of various materials, biological studies of radiation effects, health chemistry and physics.

The field of mathematics which deals with the construction of charts representing mathematical laws is known as Nomography. Often it is necessary to repeatedly solve mathematical formulae, but with different values for the symbols involved. The manipulation of the formulae, or repeated constructions of graphs, may require considerable work, as well as carry with it the possibility of errors invalidating the results. In such a situation, the construction of a single chart which would serve for all the solutions would obviously be of considerable value.

At high excitation energies, competition of proton and c-particle emission with neutron emission becomes important. For low excitation, the competition between Y-emission, neutron emission, and fission should be taken into account. To aid in the evaluation of this competition an experiment has been performed to measure the number and energy spectrum of the protons and c-particles emitted in the high energy bombardment of uranium with protons, deuterons, and c-particles.

The radiolysis of several polyaromatic compounds which might be used as coolant material in a reactor was investigated using both gamma and reactor radiation. The compounds selected were naphthalene, anthracene, naphthacene, pyrene, phenanthrene, 1, 2 benzanthracene, chrysene, triphenylene, 9, 10 dihydrophenanthrene, phenazine, 7, 8, benzoquinoline and m-phenanthroline, in addition to the uncondensed ring compounds, biphenyl, ortho, meta and para terphenyl and bibenzyl. Gas yields, percentage decomposition, percentage "high boiler" and number average molecular weights were determined. A correlation was found between radiation stability and electron affinity and singlet triplet excitation energies. The most stable compounds were the condensed ring compounds, naphthalene, pyrene, chrysene, phenanthrene and triphenylene.

A series of experiments has been conducted during the past eighteen months with the objective of degerming the accuracy with which precision parts can be duplicated using a castable tooling plastic as a test shape to be reproduced. A precision ground ground 1/4 inch-thick, 90° steel sector of 4'' radius was chosen. The plastics used in the experiments were the die surfacer mixes of the Devon Cooperation and Ren Plastics, Inc. These were selected for use in the test because of their dimensional stability and wear resistance. Ordinary paste type floor wax was used as a mold release. The first series of tests were primarily intended to gain facility in handling this material. After achieving some familiarity with the use of these castable plastics a technique was devised which seemed to hold promise of precision duplication.

Zircaloy-2 tubing was successfully joined to austenetic and ferritic stainless steel tubing by fusion bonding. Tungsten inert gas welding was employed to join a flange to a pressure tube. This work was performed to help determine the design of pressure tubes of a pressure tube reactor.

The decontamination of the present Hanford reactors involves a once-through cleaning operation. Considerable interest has been shown in determining the feasibility of this once-through technique for cleanup of certain portions of the NPR system. This is the second interim report of a series that covers tests performed in the 242-B Single Pass Flow Facility. The first was distributed in January, 1960.