From foreword: This report presents the preliminary design of a gamma irradiator intended for use as an experimental hospital sterilizer.

Abstract: The removal of both SM-1 Core I high burnup elements from SM-1 Core II and the insertion of the PM-1-M-2 element and the SM-1 Core I spare element in SM-1 Core II is discussed. Nuclear and thermal characteristics of Core II with these changes are presented and conclusions related to the changes in the hazard potential are made. If the core change indicated by this report is made, local peaking factors will be decreased and burnout ratios will be increased. This, of course, in itself leads to a more conservative estimate of core safety. There is no conceivable reason why the perturbation may not be safely made in the SM-1 Core II.

Abstract: A control system to provide digital printing and to plot an analog trace on an electric operated IBM model 11C Output Writer is described. The Digital mode of operation translates multidigit numbers through a set of commands to print each digit serially, then presents them to the output writer in a time sequence. The Analog mode of operation converts a d.c. input voltage to a digital number and by tab and space bar commands translates the carriage horizontally a distance proportional to this number.

Abstract: A stainless steel clad 9-rod assembly fabricated by The Babcock & Wilcox Company was irradiated in a boiling water loop of the General Electric Test Reactor. A post-irradiation examination revealed no significant dimensional changes on the fuel rods. the results of mass spectrometric analysis made of the pelletized UO2 fuel indicated a maximum burnup of 11,500 MWD/tonne was attained by Rod B-4 during the exposure.An x-ray diffraction examination of an unirradiated fuel sample revealed the presence of UN2 and U2N3 phases. Metallographic examination of the irradiated microstructures revealed similar second-phase particles.

Quarterly progress report discussing activities related to the Vallecitos Boiling Water Reactor (VBWR) and related facilities

From abstract: "The adsorption of ethane, ethylene and acetylene on clean iridium in a field emission microscope has been found to cause characteristic changes in the work function of the iridium surface. Further changes, which are time and temperature dependent, result when such surfaces are heated. Flash filament experiments have shown that the changes in work function upon heating are due to desorption reactions and that the desorbed product consists principally of hydrogen. By assuming a linear relationship between surface coverage and work function, it has been possible to determine the desorption kinetics from the observed rates of work function change at various temperatures. The results are consistent with a mechanism involving stepwise surface dehydrogenation in which a pair of hydrogen atoms is removed from the hydrocarbon molecule in each step, followed by desoption of the adsorbed hydrogen. At very high temperatures the remaining carbon atoms are removed, presumably by evaporation."

This technical report outlines the results and characteristics of the reactions of gallium (I) salts in aqueous bases. This report also details experimental results.

From introduction: "This article describes a training aid that was at the Ames Laboratory in order to give the plant protection group of the Laboratory an opportunity to practice closed chest cardiac massage on a simulated model. Details of the model are given so that professional or semi-professional people who may be faced with a sudden emergency requiring immediate action may duplicate this training aid."

The fabrication, irradiation and evaluation of the first two superheat fuel assemblies is described in detail. Experimental data indicate that, in general, the nuclear superheat fuel elements have performed satisfactorily under the testing conditions used. Certain problem areas which will influence future fuel element designs have been defined.