Resource Type

Language

Concept for high-charge-state ion induction accelerators (open access)

Concept for high-charge-state ion induction accelerators

This work describes a particular concept for ion induction linac accelerators using high-charge-state ions produced by an intense, short pulse laser, and compares the costs of a modular driver system producing 6.5 MJ for a variety of ion masses and charge states using a simple but consistent cost model.
Date: November 15, 1996
Creator: Logan, B. G.; Perry, M. D. & Caporaso, G. J.
System: The UNT Digital Library
Decontamination and size reduction of plutonium contaminated process exhaust ductwork and glove boxes (open access)

Decontamination and size reduction of plutonium contaminated process exhaust ductwork and glove boxes

The Los Alamos National Laboratory (LANL) Decommissioning Program has decontaminated and demolished two filter plenum buildings at Technical Area 21 (TA-21). During the project a former hot cell was retrofitted to perform decontamination and size reduction of highly Pu contaminated process exhaust (1,100 ft) and gloveboxes. Pu-238/239 concentrations were as high a 1 Ci per linear foot and averaged approximately 1 mCi/ft. The Project decontamination objective was to reduce the plutonium contamination on surfaces below transuranic levels. If possible, metal surfaces were decontaminated further to meet Science and Ecology Group (SEG) waste classification guidelines to enable the metal to be recycled at their facility in oak Ridge, Tennessee. Project surface contamination acceptance criteria for low-level radioactive waste (LLRW), transuranic waste, and SEG waste acceptance criteria will be presented. Ninety percent of all radioactive waste for the project was characterized as LLRW. Twenty percent of this material was shipped to SEG. Process exhaust and glove boxes were brought to the project decontamination area, an old hot cell in Building 4 North. This paper focuses on process exhaust and glovebox decontamination methodology, size reduction techniques, waste characterization, airborne contamination monitoring, engineering controls, worker protection, lessons learned, and waste minimization. Decontamination objectives are …
Date: November 15, 1996
Creator: LaFrate, P.; Elliott, J. & Valasquez, M.
System: The UNT Digital Library
Fiber amplifiers and lasers in Yb:silica (open access)

Fiber amplifiers and lasers in Yb:silica

We have measured gain and saturation in sing;e mode Yb:silica fiber, and developed fiber lasers and amplifiers at 1053 nm. The lasers are tunable over 10`s of nanometers, with amplifier gain flattened by fiber gratings or dielectric filters.
Date: November 15, 1996
Creator: Wilcox, R. B.; Browning, D. F.; Feit, M. D. & Nyman, B.
System: The UNT Digital Library