Photograph of case containing items from the shooting of Officer Buddy Evans. There are two frames. The largest frame holds the bullet with a placard describing the events: "Bullet that struck Officer Buddy Evans 2-26-1988. Evans observed a car not moving through the signal light at Abram and Collins Street. When he approached the woman driver, she shot him. She had been waiting for an officer to come by so she could kill him. The bullet lodged in Officer Evans vest, only injuring him." The smaller frame holds a picture of Officer Evans and his name.

Photograph of Commander Charles Laughlin and Vice Commander George Gennin at a desk. Loflin is seated, and holds a pen over a paper in front of him. Gennin stand to the right.

Photograph of a schematic for a studio camera control. There is a title at the bottom right corner of the page that reads "Figure 12. Schematic Diagram, Studio Camera Control". In the bottom center of the page is text that reads "Notes 1. Unless Otherwise Specified All resistance values in ohms - 1 watt. All capacitance values in microfarads. 2. Tube numbers refer to numbers stamped on chassis near tubes with tube designation. 3. Clockwise rotation. 4. Coaxial cable RG 62U". There are three rows on the schematic and there is a circle on the lower right side of the page that is labeled a "camera receptacle". The sections of the rows are labeled with the letter "V" which is followed by a number and a phrase that describes the function of the section.

Photograph of schematics for a switchlock. At the bottom right corner of the schematics is a title that reads "Figure 48- Switchlock Functional Block Diagram (Including Capstan Servo Modifications)". There are two separate blocks on the diagram, the top block is labeled "Capstan Servo Chassis (Unit 404)" while the bottom block is labeled "Switchlock Chassis". Both of the chassis have smaller rectangles in them that are labeled with their functions. The bottom chassis is broken up into five sections that are labeled "Tape Sync Processor Module" "Switchlock Module" "Frame" "Power 1 Module" and "Power 2 Module".

Photograph of a schematic for a power supply. There is a title at the bottom right corner of the page that reads "Figure 63. Schematic Diagram Field Power Supply (T-618700 - Sub 13)". There is text above this that reads "1 Indicate Terminal Board Numbers for T1 All resistance values in ohms & 1 watt rating and all capacitance values in MFD, unless otherwise specified. Voltages shown are at normal operating conditions at full load. CW clockwise rotation tube number refer to corresponding numbers stamped on chassis near tubes with tube designation." There are three main blocks of the schematic that are connected by lines. The different sections of these blocks are labeled by the letter "V" with a number after it and the components in these sections are labeled with a combination of letters and numbers.

Photograph of schematics for a clamper amplifier. In the title box in the corner is text that reads "Telemet Company Amityville, N.Y. Clamper Amplifier Schematic Model 3203A1 Drawn By T.D. Date 5/20/63".

Photograph of schematics for a sync lock. In the title box in the bottom right corner of the image is text that reads "Sync Lock Schematic Diagram Model 3513-A1 D1202499 Rev. 3 Sheet 2 of 2". There are three rows of circuits in the diagram, and the individual circuits in each row are labelled with a combination of letters and numbers. Above the top row and below the middle and bottom rows are words such as "Emitter Follower" "Pulse Amplifier" "Inverter" and "Integrator", among others, to label the function of each section.

Photograph of a schematic for a field switching system. There is a title in the bottom right corner that reads "Figure 62. Schematic Diagram, Field Switching System (T-617838 - Sub 4)". Above this is text that reads "Unless otherwise specified: all resistance values in ohms - 1 watt. All capacitance values in microfarads. Tube number refer to corresponding numbers stamped on chassis near tubes with tube designation. Clockwise rotation of variable". There are three rows on the schematic and the sections in the rows are labeled with the letter "V" followed by a number and a word or phrase that describes the function of the section.

Photograph of a schematic for a film camera. There is a title in the bottom right corner that reads "Figure 26. Schematic Diagram, Field Camera (W-305926 - Sub 7). The schematic has four rows of circuits and other components, and the sections of each row are labeled with the letter "V" and a number and a word that describes the section's function.

Photograph of schematics for circuits. The title box in the bottom right corner of the schematics reads "Sync Lock Schematic Diagram Model 3513-A1 D1202499 ..." and the box is surrounded by white paint. At the bottom of the middle of the sheet is a section of notes which reads "1. All resistors in ohms rated at 1/4 watt unless otherwise noted 2. All capacitors 1.0 or above in μμf unless otherwise noted and all capacitors below 1.0 in μf". There are two rows of circuits on the diagram and each of the individual components of the rows are labelled with a combination of numbers and letters. Above the top circuit and below the bottom circuit are words such as "Sawtooth Generator" "Phase Detector" "Power Supply" and "Sync Indicator" that label the functions of the sections. There are circles in the middle of the circuits at triangular shaped points.

Photograph of schematics for a field pulse former. In the bottom right corner of the schematic is a title that reads "Figure 47 Schematic Diagram, Field Pulse Former (T-618734 - Sub 10)". There are three rows of circuits on the schematic and each individual circuit is labeled with a combination of letters and numbers. Each section is labeled with a "V" and a number and there are words under these labels to describe the function of the section.

Photograph of schematics for a sync generator. In the bottom right corner of the image is a title box with the words "EIA Sync Generator" along with a model number that is illegible. Next to the title is a box that says "Telechrone Mfg. Corp". There are five rows of circuit on the schematic and the individual circuits in each row are labelled with a combination of letters and numbers.

Photograph of a schematic for a view finder. In the bottom right corner of the schematic is a title that reads "Figure 27. Schematic Diagram, View Finder (T-619256 - Sub 5)". To the left of this in the center of the bottom of the page is text that reads "Notes All resistance values in ohms & 1 watt. All capacitance value in MFD; unless otherwise specified." There are three rows of circuits on the page and the sections on the rows are labeled with the letter "V" and a number. The individual circuits and components are labeled with a combination of letters and numbers. On the right of the circuits is a funnel shape that is labeled "12 5FP4A Kine".

Photograph of a schematic for a field pulse shaper. There is a title in the bottom right corner of the schematic that reads "Figure 48. Schematic Diagram, Field Pulse Shaper (W-308120 - Sub 5)". In the bottom left corner of the schematic is more text that reads "Notes- All resistance values in ohms - 1 watt & capacitance values in micro-farads unless indicated otherwise. Tube numbers refer to corresponding numbers stamped on chassis near tubes with tube designation. Clockwise rotation of variable resistors." There are four rows on the schematic and the sections of the rows are labeled with the letter "V" and a number and a word that describes the function of the section.

Photograph of a schematic for a field camera control. There is a title at the bottom right corner of the page that reads "Figure 28. Schematic Diagram, Field Camera Control (W-302986 - Sub 10)". There are four rows on the schematic and the sections on these rows are labeled with a "V" and a number and have a word or phrase that describes the section's function.

Photograph of a diagram of a linelock. There is a title in the bottom right corner of the diagram that reads "Figure 49 - Linelock Functional Block Diagram". The diagram features six blocks that are each labeled and the labels are "Linelock", "Frame", "Modulator", "Tone Wheel Phase", "Tone Wheel Velocity", and "Pulse Processor". Inside these blocks are smaller rectangles that are labeled with their functions.

Photograph of schematics for a circuit board. There is no title on the page and there are four rows of circuits that are labeled "Relay", "Cam. Control 1", "Cam. Control 2", "Cam. Control 3", "Cam Control 4", and "Prod". There are two vertical rows of circuits on the right side of the board and then there is a rectangular component under these.

Two photographs of a freight station building in Eastland County, Texas. The first photograph shows the north and east sides of the building, which is a narrow, single-story building with a tall gabled roof and extended eaves with brackets. The second image shows the same angle from farther east, at the corner of W. 3rd Street and Conrad Hilton Ave.; part of another building and parked cars are visible in front of the station. Handwritten text below the images says, "T&P Eastland Texas Freight Station at Eastland, Texas Apr 26th 1982."

Photograph of a train station in Ranger, Texas, viewed from the train tracks. The station is a long, single-story brick building; a three-story brick building is visible behind the station, to the right. Handwritten text below the image says, "T&P Station at Ranger, Texas Apr 26th 1982 (looking west)."

Photograph of a hill somewhat covered in vegetation, with a set of railroad tracks crossing it, about halfway up. A grassy field is visible in the foreground. Handwritten text below the image says, "T&P tracks climbing Baird Hill - Apr 26th 1982."

Two photographs taken in Ranger, Texas; the top image is of the train station, viewed from the train tracks. The station is a long, single-story brick building; a three-story brick building is visible behind the station, to the right. The lower image shows a main street in Ranger with various buildings and strorefronts lining either side of the street and several cars on the road. Handwritten text below the image says, "Top Photo - T&P Station at Ranger, Texas Apr 26th 1982 (looking west). Bottom Photo - Town of Ranger (looking north from east end of station)."

Photograph of the "Ace-in-the-Hole" insignia of the 111th Observation Squadron, 36th Division of the Texas National Guard.

Photograph of a large group of ostriches on an ostrich farm in Quail, Texas. They are pictured in a field behind a fence.

Photograph of schematics for a circuit board. In the bottom right corner of the image is a title that reads "Figure 22 - Schematic Diagram, TG-2A, TG-12A,Sync Generators (363995, Sub 3)". There are four rows of circuits and in between the rows are words such as "Clipper" "Regulator" "Rectifier" and "Genlock Relay", among others, to label the functions of the sections. The individual circuits are labeled with combinations of letters and numbers.