A letter report issued by the Government Accountability Office with an abstract that begins "In accordance with 36 U.S.C. 2103, GAO is responsible for conducting audits of the agencywide financial statements of the American Battle Monuments Commission (the Commission). GAO audited the financial statements of the Commission for the fiscal years ended September 30, 2006, and 2005. The audits were done to determine whether, in all material respects, (1) the Commission's financial statements were presented fairly, and (2) Commission management maintained effective internal control over financial reporting and compliance with laws and regulations. Also, GAO tested Commission management's compliance with selected laws and regulations. The Commission was created in 1923 to commemorate the sacrifices and achievements of U.S. Armed Forces where they have served overseas since April 6, 1917, and locations within the United States as directed by Congress. The Commission designs, administers, operates, and maintains 24 American military cemeteries on foreign soil and 25 federal memorials, monuments, and markers, 22 of which are on foreign soil. The Commission was also responsible for designing and constructing the national World War II Memorial on the Capitol Mall in Washington, D.C., and for maintaining six nonfederal memorials with funds provided by those …

A letter report issued by the Government Accountability Office with an abstract that begins "In response to Hurricane Katrina, the Departments of Homeland Security (DHS) and Defense (DOD), the General Services Administration (GSA), and the U.S. Army Corps of Engineers (Corps) were responsible for 94 percent of the federal funds awarded for relief efforts via contracting as of May 2006. This report, which GAO conducted under the Comptroller General's Authority, describes (1) the amounts that small businesses received from prime contracts with these agencies, (2) the extent of subcontracting, (3) and the extent to which Disadvantaged Business Enterprises (DBEs) received Department of Transportation funds for Katrina-related projects. In conducting this study, GAO analyzed agency contract data, reviewed federal acquisition regulations, and interviewed agency procurement officials."

Correspondence issued by the Government Accountability Office with an abstract that begins "In 2003, the National Aeronautics and Space Administration (NASA) was authorized to demonstrate enhanced use leasing (EUL) at two centers, allowing the agency to retain the proceeds from leasing out underutilized real property and to accept in-kind consideration in lieu of cash for rent. NASA selected Ames Research Center and Kennedy Space Center for the demonstration program. The agency had requested that Congress extend this authority to additional NASA centers during formulation of the NASA Authorization Act of 2005. NASA's request was not granted. Instead, Section 710 of the NASA Authorization Act of 2005 (Public Law 109-155) directed GAO to review NASA's EUL program. We examined (1) the financial impact of the EUL authority on NASA and whether EUL revenue and other financial benefits would have been realized without the authority, (2) NASA's use of the authority and whether the arrangements made under the authority would have been made in the absence of the authority, and (3) what controls are in place to ensure accountability and transparency and to protect the government. The act also directed GAO to report back to the Congress by December 30, 2006. We …

Testimony issued by the Government Accountability Office with an abstract that begins "The foundation laid by the Chief Financial Officers Act of 1990 and other management reform legislation provided a much needed statutory basis to improve the accountability of government programs and operations. Such reforms were intended to produce reliable, timely, and useful financial information to help manage day-to- day operations and exercise oversight and promote fiscal stewardship. This testimony, based on GAO's prior work, addresses (1) the progress made and challenges remaining to improve federal financial management practices, and (2) the serious challenges posed by the government's deteriorating long-range fiscal condition and the Comptroller General's views on a possible way forward."

Testimony issued by the Government Accountability Office with an abstract that begins "In August 1997, Congress created the State Children's Health Insurance Program (SCHIP) with the goal of significantly reducing the number of low-income uninsured children, especially those who lived in families with incomes exceeding Medicaid eligibility requirements. Unlike Medicaid, SCHIP is not an entitlement to services for beneficiaries but a capped allotment to states. Congress provided a fixed amount--approximately $40 billion from fiscal years 1998 through 2007--to states with approved SCHIP plans. Funds are allocated to states annually. Subject to certain exceptions, states have 3 years to use each year's allocation, after which unspent funds may be redistributed to states that have already spent all of that year's allocation. GAO's testimony addresses trends in SCHIP enrollment and the current composition of SCHIP programs across the states, states' spending experiences under SCHIP, and considerations GAO has identified for SCHIP reauthorization. GAO's testimony is based on its prior work, particularly testimony before the Senate Finance Committee on February 1, 2007 (see GAO-07-447T). GAO updated this work with the Centers for Medicare & Medicaid Services' (CMS) January 2007 approval of Tennessee's SCHIP program."

China has developed a comprehensive program of energy efficiency standards and labels for household appliances. In 1989, China first launched its minimum energy performance standards (MEPS), which are now applied to an extensive list of products. In 1998, China launched a voluntary energy endorsement label, which has grown to cover both energy-saving and water-saving products. And, in 2005, China launched a mandatory energy information label that initially covered two products. CLASP has assisted China in developing 11 minimum energy performance standards (MEPS) for 9 products and endorsement labels for 11 products including: refrigerators; air conditioners; televisions; printers; computers; monitors; fax machines; copiers; DVD/VCD players; external power supplies; and set-top boxes. CLASP has also assisted China in the development of the mandatory energy information label. Increasingly, attention is being placed on maximum energy savings from China's standards and labeling (S&L) efforts in order to meet the recently announced goal of reducing China's energy intensity by 20 percent by 2010 with an interim objective of 4 percent in 2006. China's mandatory standards system is heavily focused on the technical requirements for efficiency performance, but historically, it has lacked administrative and personnel capacity to undertake monitoring and enforcement of these legally binding standards. …

Using a standard vibratory horn apparatus, the relative cavitation-erosion resistance of a number of cast alloys in mercury was evaluated to facilitate material selection decisions for Hg pumps. The performance of nine different alloys - in the as-cast condition as well as following a case-hardening treatment intended to increase surface hardness - was compared in terms of weight loss and surface profile development as a function of sonication time in Hg at ambient temperature. The results indicated that among several potentially suitable alloys, CD3MWCuN perhaps exhibited the best overall resistance to cavitation in both the as-cast and surface treated conditions while the cast irons examined were found unsuitable for service of this type. However, other factors, including cost, availability, and vendor schedules may influence a material selection among the suitable alloys for Hg pumps.

Low Temperature Cofired Ceramic (LTCC) has proven to be an enabling medium for microsystem technologies, because of its desirable electrical, physical, and chemical properties coupled with its capability for rapid prototyping and scalable manufacturing of components. LTCC is viewed as an extension of hybrid microcircuits, and in that function it enables development, testing, and deployment of silicon microsystems. However, its versatility has allowed it to succeed as a microsystem medium in its own right, with applications in non-microelectronic meso-scale devices and in a range of sensor devices. Applications include silicon microfluidic ''chip-and-wire'' systems and fluid grid array (FGA)/microfluidic multichip modules using embedded channels in LTCC, and cofired electro-mechanical systems with moving parts. Both the microfluidic and mechanical system applications are enabled by sacrificial volume materials (SVM), which serve to create and maintain cavities and separation gaps during the lamination and cofiring process. SVMs consisting of thermally fugitive or partially inert materials are easily incorporated. Recognizing the premium on devices that are cofired rather than assembled, we report on functional-as-released and functional-as-fired moving parts. Additional applications for cofired transparent windows, some as small as an optical fiber, are also described. The applications described help pave the way for widespread application of …

The once-through fuel cycle strategy in the United States for the past six decades has resulted in an accumulation of Light Water Reactor (LWR) Spent Nuclear Fuel (SNF). This SNF contains considerable amounts of transuranic (TRU) elements that limit the volumetric capacity of the current planned repository strategy. A possible way of maximizing the volumetric utilization of the repository is to separate the TRU from the LWR SNF through a process such as UREX+1a, and convert it into fuel for a fast-spectrum Advanced Burner Reactor (ABR). The key advantage in this scenario is the assumption that recycling of TRU in the ABR (through pyroprocessing or some other approach), along with a low capture-to-fission probability in the fast reactor’s high-energy neutron spectrum, can effectively decrease the decay heat and toxicity of the waste being sent to the repository. The decay heat and toxicity reduction can thus minimize the need for multiple repositories. This report summarizes the work performed by the fuel cycle analysis group at the Idaho National Laboratory (INL) to establish the specific technical capability for performing fast reactor fuel cycle analysis and its application to a high-priority ABR concept. The high-priority ABR conceptual design selected is a metallic-fueled, 1000 …

Studies conducted at the Pacific Northwest National Laboratory in Richland, Washington, have focused on assessing the effectiveness and reliability of novel approaches to nondestructive examination (NDE) for inspecting coarse-grained, cast stainless steel reactor components. The primary objective of this work is to provide information to the U.S. Nuclear Regulatory Commission on the effectiveness and reliability of advanced NDE methods as related to the inservice inspection of safety-related components in pressurized water reactors (PWRs). This report provides progress, recent developments, and results from an assessment of low frequency ultrasonic testing (UT) for detection of inside surface-breaking cracks in cast stainless steel reactor piping weldments as applied from the outside surface of the components. Vintage centrifugally cast stainless steel piping segments were examined to assess the capability of low-frequency UT to adequately penetrate challenging microstructures and determine acoustic propagation limitations or conditions that may interfere with reliable flaw detection. In addition, welded specimens containing mechanical and thermal fatigue cracks were examined. The specimens were fabricated using vintage centrifugally cast and statically cast stainless steel materials, which are typical of configurations installed in PWR primary coolant circuits. Ultrasonic studies on the vintage centrifugally cast stainless steel piping segments were conducted with a 400-kHz …

Understanding microclimate dynamics in tunnels is importantfor designing and maintaining underground facilities. For example, in thegeological disposal of radioactive materials, condensation of vaporshould be minimized as it can accelerate waste package corrosion andradionuclide release. While microclimate dynamics are known to bedominated by the advection of heat and moisture, additional factors mayalso be important, such as the presence of fractures or faults. Wepresent a relatively inexpensive method to assess microclimaticperturbations within a tunnel. By combining standard temperature andrelative humidity sensors with low-cost sensors designed to detectchanges in condensation, we monitored microclimate dynamics along atunnel at the proposed geological repository at Yucca Mountain, Nevada.We observed significant differences in the pattern of condensation in afaulted zone relative to that of a nonfaulted zone, suggesting that themicroclimate dynamics of excavated cavities in fractured, partiallysaturated rocks can be highly complex.

The Indian Bureau of Energy Efficiency (BEE) finalized its first set of efficiency standards and labels for room air conditioners in July of 2006. These regulations followed soon after the publication of levels for frost-free refrigerators in the same year. As in the case of refrigerators, the air conditioner program introduces Minimum Efficiency Performance Standards (MEPS) and comparative labels simultaneously, with levels for one to five stars. Also like the refrigerator program, BEE defined several successive program phases of increasing stringency. In support of BEE's refrigerator program, Lawrence Berkeley National Laboratory (LBNL) produced an analysis of national impacts of standards in collaboration with the Collaborative Labeling and Standards Program (CLASP). That analysis drew on LBNL's experience with standards programs in the United States, as well as many other countries. Subsequently, as part of the process for setting optimal levels for air conditioner regulations, CLASP commissioned LBNL to provide support to BEE in the form of a techno-economic evaluation of air conditioner efficiency technologies. This report describes the methodology and results of this techno-economic evaluation. The analysis consists of three components: (1) Cost effectiveness to consumers of efficiency technologies relative to current baseline. (2) Impacts on the current market from efficiency …

None

Fine particulate matter collected at two urban, four near-urban, and six remote sites throughout the United States were analyzed for total carbon (TC) and radiocarbon ({sup 14}C). Samples were collected at most sites for both a summer and winter season. The radiocarbon was used to partition the TC into fossil and contemporary fractions. On average, contemporary carbon composed about half of the carbon at the urban, {approx}70-97% at near-urban, and 82-100% at remote sites. At Phoenix, Arizona, and Seattle, Washington, one monitor was located within the urban center and one outside to assess the urban excess over background concentrations. During the summer the urban and rural sites had similar contemporary carbon concentrations. However, during the winter the urban sites had more than twice the contemporary carbon measured at the neighboring sites, indicating anthropogenic contributions to the contemporary carbon. The urban fossil carbon was 4-20 times larger than the neighboring rural sites for both seasons. Organic (OC) and elemental carbon (EC) from TOR analysis were available. These and the radiocarbon data were used to estimate characteristic fossil and contemporary EC/TC ratios for the winter and summer seasons. These ratios were applied to carbon data from the Interagency Monitoring of Protected Visual …

We report on an infrared spectroscopy study of mobile holes in the accumulation layer of organic field-effect transistors based on rubrene single crystals. Our data indicate that both transport and infrared properties of these transistors at room temperature are governed by light quasiparticles in molecular orbital bands with the effective masses m[small star, filled]comparable to free electron mass. Furthermore, the m[small star, filled]values inferred from our experiments are in agreement with those determined from band structure calculations. These findings reveal no evidence for prominent polaronic effects, which is at variance with the common beliefs of polaron formation in molecular solids.

This guide describes the R&A process, Common Look and Feel requirements, and preparation and publishing procedures for communication products at Sandia National Laboratories. Samples of forms and examples of published communications products are provided. This guide takes advantage of the wealth of material now available on the Web as a resource. Therefore, it is best viewed as an electronic document. If some of the illustrations are too small to view comfortably, you can enlarge them on the screen as needed. The most significant changes since Version 1 involve the introduction of the electronic Review and Approval application at the Sandia/California (CA) and Sandia/New Mexico (NM) sites. Authors are advised to check the most current material on the application Web site before initiating the R&A process. The format of this document is considerably different than that expected of a SAND Report. It was selected to permit the large number of illustrations and examples to be placed closer to the text that references them. In the case of forms, covers, and other items that are included as examples, a link to the Web is provided so that you can access the items and download them for use.

This is one in a series of tip sheets to help manufacturers optimize their industrial pumping systems.

MINERVA (Modality-Inclusive Environment for Radiotherapeutic Variable Analysis) is a Java-based patient-centric radiation treatment planning system (RTPS) for computational dosimetry and treatment planning in emerging areas of radiotherapy for cancer and other diseases. MINERVA was primarily developed at the Idaho National Laboratory (INL) and Montana State University (MSU). MINERVA allows the radiotherapist to make side-by-side comparison of plans for multiple treatment modalities with a common anatomical basis for the computational geometry, calculate doses for combinations of different radiotherapy modalities, and perform dose analysis and reporting functions. This provides the therapist with a consistent basis for selecting the modality or combination of modalities to use for treatment of the patient. MINERVA employs an integrated, lightweight plug-in architecture to accommodate multi-modal treatment planning using standard interface components. The MINERVA design facilitates integration of improved or emerging treatment planning technologies. MINERVA consists of the basic radiation treatment planning software modules managed by a consistent patient interface for developing multi-modal radiotherapy patient treatment plans. One of MINERVA's main functions is to provide a graphical environment for constructing and displaying uniform volume-element-based solid models derived from medical images. These solid models form the geometric basis of the target areas for the radiation transport model.

This 'Quick Reference Guide' supplements the more complete 'Guide to Preparing SAND Reports and Other Communication Products'. It provides limited guidance on how to prepare SAND Reports at Sandia National Laboratories. Users are directed to the in-depth guide for explanations of processes.

Chemoautotrophic endosymbionts are the metabolic cornerstone of hydrothermal vent communities, providing invertebrate hosts with nearly all of their nutrition. The Calyptogena magnifica (Bivalvia: Vesicomyidae) symbiont, Candidatus Ruthia magnifica, is the first intracellular sulfur-oxidizing endosymbiont to have its genome sequenced, revealing a suite of metabolic capabilities. The genome encodes major chemoautotrophic pathways as well as pathways for biosynthesis of vitamins, cofactors, and all 20 amino acids required by the clam.

A method for evaluating the room temperature ductility behavior of irradiated Zircaloy-4 nuclear fuel cladding has been developed and applied to evaluate tensile hoop strength of material irradiated to different levels. The test utilizes a polyurethane plug fitted within a tubular cladding specimen. A cylindrical punch is used to compress the plug axially, which generates a radial displacement that acts upon the inner diameter of the specimen. Position sensors track the radial displacement of the specimen outer diameter as the compression proceeds. These measurements coupled with ram force data provide a load-displacement characterization of the cladding response to internal pressurization. The development of this simple, cost-effective, highly reproducible test for evaluating tensile hoop strain as a function of internal pressure for irradiated specimens represents a significant advance in the mechanical characterization of irradiated cladding. In this project, nuclear fuel rod assemblies using Zircaloy-4 cladding and two types of mixed uranium-plutonium oxide (MOX) fuel pellets were irradiated to varying levels of burnup. Fuel pellets were manufactured with and without thermally induced gallium removal (TIGR) processing. Fuel pellets manufactured by both methods were contained in fuel rod assemblies and irradiated to burnup levels of 9, 21, 30, 40, and 50 GWd/MT. These …

This is the final report of the NUMO-LBNL collaborative project: Feature Detection, Characterization and Confirmation Methodology under NUMO-DOE/LBNL collaboration agreement, the task description of which can be found in the Appendix. We examine site characterization projects from several sites in the world. The list includes Yucca Mountain in the USA, Tono and Horonobe in Japan, AECL in Canada, sites in Sweden, and Olkiluoto in Finland. We identify important geologic features and parameters common to most (or all) sites to provide useful information for future repository siting activity. At first glance, one could question whether there was any commonality among the sites, which are in different rock types at different locations. For example, the planned Yucca Mountain site is a dry repository in unsaturated tuff, whereas the Swedish sites are situated in saturated granite. However, the study concludes that indeed there are a number of important common features and parameters among all the sites--namely, (1) fault properties, (2) fracture-matrix interaction (3) groundwater flux, (4) boundary conditions, and (5) the permeability and porosity of the materials. We list the lessons learned from the Yucca Mountain Project and other site characterization programs. Most programs have by and large been quite successful. Nonetheless, there …

The minimum energy efficiency standards program for household appliances in China was initiated in 1989. Since 1996, CLASP and its implementing partner, LBNL, have assisted China in developing 11 minimum energy performance standards (MEPS) for 9 products and endorsement labels for 11 products including: refrigerators; air conditioners; clothes washers; televisions; printers; computers; monitors; fax machines; copiers; DVD/VCD players; external power supplies; and set-top boxes (under development). Before 2003, China's traditional approach to standards development involved small increases in efficiency requirements for implementation within 6 months of a standard's approval. Since 2003, China has adopted a new approach in setting MEPS. This new approach involves the development of two tiers of standards--one for initial implementation and a second tier at a more aggressive level of energy efficiency for implementation three to five years later. The second-tier standard is also referred to as a 'reach standard'. Reach standards have now been developed in China for: color TVs; refrigerators; air conditioners; and external power supplies. This report is presented in five sections. After the introduction in Section 1, Section 2 analyzes the distribution of the efficiency of refrigerators and air-conditioners in China based on data collected by the China Energy Label Center for …

In November 2005, the Energy & Environmental Research Center (EERC), ePowerSynergies, Inc. (ePSI), and Resurfice Corporation teamed to develop, produce, and demonstrate the world's first and only fuel cell-powered ice resurfacer. The goals of this project were: {sm_bullet} To educate the public on the readiness, practicality, and safety of fuel cells powered by hydrogen fuel and {sm_bullet} To establish a commercialization pathway in an early-adopter, niche market. The vehicle was developed and produced in a short 3-month span. The vehicle made its world debut at U.S. Senator Byron Dorgan's (D-ND) 2005 Hydrogen Energy Action Summit. Subsequently, the vehicle toured North America appearing at numerous public events and conferences, receiving much attention from international media outlets.