A letter report issued by the Government Accountability Office with an abstract that begins "Department of Defense (DOD) officials currently estimate that the department will spend approximately $34 billion through 2011 to develop the core network of the Global Information Grid (GIG), a large and complex undertaking intended to provide on-demand and real-time data and information to the warfighter. DOD views the GIG as the cornerstone of information superiority, a key enabler of network-centric warfare, and a pillar of defense transformation. A high degree of coordination and cooperation is needed to make the GIG a reality. In prior work GAO found that enforcing investment decisions across the military services and assuring management attention and oversight of the GIG effort were key management challenges facing DOD. This report assesses (1) the management approach that DOD is using to develop the GIG and (2) whether DOD's three major decision-making processes support the development of a crosscutting, departmentwide investment, such as the GIG."

The Surface and Tower Meteorological Instrumentation at Atqasuk (METTWR2H) uses mainly conventional in situ sensors to measure wind speed, wind direction, air temperature, dew point and humidity mounted on a 10-m tower. It also obtains barometric pressure, visibility, and precipitation data from sensors at or near the base of the tower. In addition, a Chilled Mirror Hygrometer is located at 1 m for comparison purposes. Temperature and relative humidity probes are mounted at 2 m and 5 m on the tower. For more information, see the Surface and Tower Meteorological Instrumentation at Atqasuk Handbook.

Carbonaceous aerosols affect air quality and climate, but measurements of black (BC) and organic (OC) carbon concentrations are very uncertain. Many variants of the thermal-optical analysis (TOA) method exist, and more than a decade of research has not resolved the differences in their estimates of OC and BC (i.e., the OC/BC split). This is largely due to the lack of a BC standard. Without a BC standard, the accuracy of TOA measurements of OC and BC cannot be determined. The research goal is to develop a method of producing BC standards that can be used to determine the accuracy in TOA measurements of OC and BC. The uncertainty in TOA measurements is due to the presence of both OC and BC in particulate matter. Whereas measuring total carbon (TC) is straightforward, OC pyrolysis and charring and premature evolution of BC render determination of the OC/BC split uncertain (and method dependent) (1,2,3). If a particulate matter sample containing only OC or BC was analyzed by TOA, there would be little uncertainty in the measurement. Our approach to developing a standard for TOA, therefore, is to (1) generate particulate matter composed only of BC and fully characterize the physical and optical properties …

None

An evaluation has been made for using the Oxide Washer to wash water-soluble materials out of impure Pu oxide. It is found that multiple washes are needed to reduce the water-soluble materials to very low levels in the impure Pu oxides. The removal of the wash water from the Oxide Washer is accompanied by particulates of the impure Pu oxide, which subsequently need to be filtered out. In spite of the additional filtration needed, the overall level of manpower required for processing is still only about one third of that for an all-manual operation.

Acoustic Doppler current profilers (ADCPs) were used to measure water velocities in the tailrace at John Day Dam over a two-week period in February 2005. Data were collected by the Pacific Northwest National Laboratory for the Hydraulic Design Section, Portland District, U.S. Army Corps of Engineers (USACE). The objective of this project was therefore to collect field measurements of water velocities in the near-field draft tube exit zone as well as the far-field tailrace to be used for improving these models. Field data were collected during the project using five separate ADCPs. Mobile ADCP data were collected using two ADCPs mounted on two separate boats. Data were collected by either holding the boat on-station at pre-defined locations for approximately 10 minutes or in moving transect mode when the boat would move over large distances during the data collection. Results from the mobile ADCP survey indicated a complex hydrodynamic flow field in the tailrace downstream of John Day Dam. A large gyre was noted between the skeleton section of the powerhouse and non-spilling portion of the spillway. Downstream of the spillway, the spillway flow is constrained against the navigation lock guide wall, and large velocities were noted in this region. Downstream …

The objective of this document is to explore the realm of enhancements to natural attenuation processes for cVOCs and review examples that have been proposed, modeled, and implemented. We will identify lessons learned from these case studies to confirm that enhancements are technically feasible and have the potential to achieve a favorable, cost-effective contaminant mass balance. Furthermore, we hope to determine if opportunities for further improvement of the enhancements exist and suggest areas where new and innovative types of enhancements might be possible.

Pressure-volume relationships were measured for unexpanded Expancel microspheres, epoxy foam and one specimen of crushed foam powder. The specimens were jacketed in tin canisters and compressed at ambient temperature and low strain rates to 3 GPa in a solid medium press. Pressures were corrected for friction, and specimen volumes were calculated relative to a nickel standard. The pressure-volume curves for each material show large volume reductions at pressures below 0.1 GPa. The curves stiffen sharply at or near full density. Relatively little volume reduction is observed above 0.1 GPa, and most is recovered on unloading. The energy expended in compressing the materials to 3 GPa and the energy recovered on unloading were determined by numerically integrating the pressure-volume curves. The net energy, which includes absorbed energy, was found to be small. Compressibilities and bulk moduli were determined from the slopes of the pressure-volume curves. The Expancel bulk modulus above 0.1 GPa was found to be similar to that of isopentane. The pressure-volume data were fit to a model from the ceramics literature (Kawakita and Ludde, 1970). The model fits provided estimates of the initial specimen porosities and room pressure bulk moduli.

The objective of this work is to develop and/or apply advanced diagnostics to the understanding of aging of Pu. Advanced characterization techniques such as photoelectron and x-ray absorption spectroscopy will provide fundamental data on the electronic structure of Pu phases. These data are crucial for the validation of the electronic structure methods. The fundamental goal of this project is to narrow the parameter space for the theoretical modeling of Pu aging. The short-term goal is to perform experiments to validate electronic structure calculations of Pu. The long-term goal is to determine the effects of aging upon the electronic structure of Pu. Many of the input parameters for aging models are not directly measurable. These parameters will need to be calculated or estimated. Thus a First Principles-Approach Theory is needed, but it is unclear what terms are important in the Hamiltonian (H{Psi} = E{Psi}). Therefore, experimental data concerning the 5f electronic structure are needed, to determine which terms in the Hamiltonian are important. The data obtained in this task are crucial for reducing the uncertainty of Task LL-01-developed models and predictions. The data impact the validation of electronic structure methods, the calculation of defect properties, the evaluation of helium diffusion, and …

A number of areas of plasma physics have had outstanding success over the last decade. The author comments on progress in understanding and manipulating particle beams, a variety of non-neutral plasmas. Some of the key manipulations were made possible by immersing a particle beam in neutral plasma in order to greatly reduce space-charge forces on the beam.

During this last quarter of the ''Seismic Evaluation of Hydrocarbon Saturation in Deep-Water Reservoirs'' project (Grant/Cooperative Agreement DE-FC26-02NT15342), our efforts have become focused on technology transfer. To this end, we completing our theoretical developments, generating recommended processing flows, and perfecting our rock and fluid properties interpretation techniques. Some minor additional data analysis and modeling will complete our case studies. During this quarter we have: Presented findings for the year at the DHI/FLUIDS meeting at UH in Houston; Presented and published eight papers to promote technology transfer; Shown how Rock and fluid properties are systematic and can be predicted; Shown Correct values must be used to properly calibrate deep-water seismic data; Quantified and examined the influence of deep water geometries in outcrop; Compared and evaluated hydrocarbon indicators for fluid sensitivity; Identified and documented inappropriate processing procedures; Developed inversion techniques to better distinguish hydrocarbons; Developed new processing work flows for frequency-dependent anomalies; and Evaluated and applied the effects of attenuation as an indicator. We have demonstrated that with careful calibration, direct hydrocarbon indicators can better distinguish between uneconomic ''Fizz'' gas and economic hydrocarbon reservoirs. Some of this progress comes from better characterization of fluid and rock properties. Other aspects include alternative techniques …

This report documents a four-year study to assess hydraulic conditions in the lower Snake River. The work was conducted for the Bonneville Power Administration, U.S. Department of Energy, by the Pacific Northwest National Laboratory. Cold water released from the Dworshak Reservoir hypolimnion during mid- to late-summer months cools the Clearwater River far below equilibrium temperature. The volume of released cold water augments the Clearwater River, and the combined total discharge is on the order of the Snake River discharge when the two rivers meet at their confluence near the upstream edge of Lower Granite Reservoir. With typical temperature differences between the Clearwater and Snake rivers of 10°C or more during July and August, the density difference between the two rivers during summer flow augmentation periods is sufficient to stratify Lower Granite Reservoir as well as the other three reservoirs downstream. Because cooling of the river is desirable for migrating juvenile fall Chinook salmon (Oncorhynchus tshawytscha) during this same time period, the amount of mixing and cold water entrained into Lower Granite Reservoir’s epilimnion at the Clearwater/Snake River confluence is of key biological importance to juvenile fall Chinook salmon. Data collected during this project indicates the three reservoirs downstream of Lower …

The goal of the project was to demonstrate that low pressure loop EGR incorporating a diesel oxidation catalyst (DOC) and a diesel particulate filter (DPF) can be applied to an off-highway engine to meet Tier 3 (Task I) and Interim Tier 4 (Task II) off-road emissions standards. Task I data was collected using a John Deere 8.1 liter engine modified with a low pressure loop EGR system. The engine and EGR system was optimized and final data over the ISO 8178 eight mode test indicated the NOx emissions were less than 4 g/kWh and the PM was less than 0.02 g/kWh which means the engine met the Tier 3 off-road standard. Considerable experimental data was collected and used by Michigan Tech University to develop and calibrate the MTU-Filter 1D DPF model. The MTU-Filter 1D DPF code predicts the particulate mass evolution (deposition and oxidation) in the diesel particulate filter (DPF) during simultaneous loading and during thermal and NO{sub 2}-assisted regeneration conditions. It also predicts the pressure drop across the DPF, the flow and temperature fields, the solid filtration efficiency and the particle number distribution downstream of the DPF. A DOC model was also used to predict the NO{sub 2} upstream …

None

None

None

None

This report provides an overview of the competitive sourcing legislation. Until the late 1990's, the the executive branch, namely OMB, almost exclusively, led the competitive sourcing effort, issuing revisions to the circular, overseeing implementation of the policy, and providing guidance to agencies.

None

This report outlines the technical progress achieved for project DE-FC26-03NT41785 (Total Ore Processing Integration and Management) during the period 01 October through 31 December of 2005. Graphical analysis of blast patterns according to drill monitor data is continuing. Multiple linear regression analysis of 16 mine and mill variables (powder factor, two modeled size fractions, liberation index, predicted grind, total crude Fe, Satmagan Fe, sat ratio, DSC, geologic blend, ambient temperature, cobbing hours, feeder plugs, and percent feeder run time-of-mill time) indicates that December variations in plant performance are generally predictable (Figure 1). The outlier on December 28th coincides with low cobbing availability and equipment downtime. Mill productivity appeared to be most influenced, as usual, by ore quality as indicated by the liberation index--the higher the liberation index, the lower the throughput. The upcoming quarter will be concerned with wrapping up the work in progress, such as the detailed statistical analyses, and writing a final report. Hibtac Mine engineers are evaluating neural network software to determine its utility for modeling, and eventually predicting, mill throughput.

None

This report outlines the technical progress achieved for project DE-FC26-03NT41785 (Total Ore Processing Integration and Management) during the period 01 July through 30 September of 2005. This ninth quarterly report discusses the activities of the project team during the period 1 July through 30 September 2005. Richard Gertsch's unexpected death due to natural causes while in Minnesota to work on this project has temporarily slowed progress. Statistical analysis of the Minntac Mine data set for late 2004 is continuing. Preliminary results raised several questions that could be amenable to further study. Detailed geotechnical characterization is being applied to improve the predictability of mill and agglomerator performance at Hibtac Mine.

None

This project was initially targeted to the making of coke for blast furnaces by using proprietary technology of Calderon in a phased approach, and Phase I was successfully completed. The project was then re-directed to the making of iron units. In 2000, U.S. Steel teamed up with Calderon for a joint effort to produce directly reduced iron with the potential of converting it into molten iron or steel consistent with the Roadmap recommendations of 1998 prepared by the Steel Industry in cooperation with the Department of Energy by using iron ore concentrate and coal as raw materials, both materials being appreciably lower in cost than using iron pellets, briquettes, sinter and coke.