N/A

The Sequencer Controller boards are 9U by 340mm circuit boards that will reside in slot 1 of each of eight Sequencer crates in the D0 detector platform. The primary purpose is to control the Sequencers during data acquisition based on trigger information from the D0 Trigger Framework. Functions and features are as follows: (1) Receives the Serial Command Link (SCL) from the D0 Trigger System and controls the operation of the Sequencers by forming a custom serial control link (NRZ/Clock) which is distributed individually to each Sequencer via the 11 Backplane; (2) Controllable delays adjust NRZ control link phasing to compensate for the various cable-length delays between the Sequencers and SVX chips, delay control is common for slots 2-11, and for slots 12-21 of the crate; (3) Each NRZ control link is phase controlled so that commands reach each Sequencer in a given half-crate simultaneously, i.e., the link is compensated for backplane propagation delays; (4) External communication via MIL-STD-1553; (5) Stand-alone operation via 1553 trigger commands in absence of an SCL link; (6) 1553-writeable register for triggering a laser, etc. followed by an acquisition cycle; (7) TTL front panel input to trigger an acquisition cycle, e.g. from a scintillator; (8) …

The human breast comprises three lineages: the luminal epithelial lineage, the myoepithelial lineage, and the mesenchymal lineage. It has been widely accepted that human breast neoplasia pertains only to the luminal epithelial lineage. In recent years, however, evidence has accumulated that neoplastic breast epithelial cells may be substantially more plastic in their differentiation repertoire than previously anticipated. Thus, along with an increasing availability of markers for the myoepithelial lineage, at least a partial differentiation towards this lineage is being revealed frequently. It has also become clear that conversions towards the mesenchymal lineage actually occur, referred to as epithelial to mesenchymal transitions. Indeed, some of the so-called myofibroblasts surrounding the tumor may indeed have an epithelial origin rather than a mesenchymal origin. Because myoepithelial cells, epithelial to mesenchymal transition-derived cells, genuine stromal cells and myofibroblasts share common markers, we now need to define a more ambitious set of markers to distinguish these cell types in the microenvironment of the tumors. This is necessary because the different microenvironments may confer different clinical outcomes. The aim of this commentary is to describe some of the inherent complexities in defining cellular phenotypes in the microenvironment of breast cancer and to expand wherever possible on …

The objective of this study was to develop, monitor, analyze, and report on an integrated resource-conservation program highlighting efficient residential appliances and fixtures. The sites of study were 50 homes in two water-constrained communities located in Oregon. The program was designed to maximize water savings to these communities and to serve as a model for other communities seeking an integrated approach to energy and water resource efficiency. The program included the installation and in-place evaluation of energy- and water-efficient devices including the following: horizontal axis clothes washers (and the matching clothes dryers), resource-efficient dishwashers, an innovative dual flush low-flow toilet, low-flow showerheads, and faucet aerators. The significance of this activity lies in its integrated approach and unique metering evaluation of individual end-use, aggregated residential total use, and system-wide energy and water benefits.

During calendar year 2000, the Pacific Northwest National Laboratory performed its customary radiological protection support services in support of the U.S. Department of Energy Richland Operations Office and the Hanford contractors. These services included: 1) external dosimetry, 2) internal dosimetry, 3) in vivo monitoring, 4) radiological records, 5) instrument calibration and evaluation, and 6) calibration of radiation sources traceable to the National Institute of Standards and Technology. Each program summary describes the routine operations, program changes and improvements, program assessments, supporting technical studies, and professional activities.

Authentication is how we establish trust in monitoring systems and measurements to verify compliance with, for example, the storage of nuclear weapons material. Authentication helps assure the monitoring party that accurate and reliable information is provided by any measurement system and that any irregularities are detected. The U.S. is developing its point of view on the procedures for authentication of monitoring systems now planned or contemplated for arms reduction and control applications. The authentication of a system utilizes a set of approaches, including: functional testing using trusted calibration sources, evaluation of documentation, evaluation of software, evaluation of hardware, random selection of hardware and software, tamper-indicating devices, and operational procedures. Authentication of measurement systems should occur throughout their lifecycles, starting with the elements of design, and moving to off-site authentication, on-siste authentication, and continuing with authentication following repair. The most important of these is the initial design of systems. Hardware and software design criteria and procurement decisions can make future authentication relatively straightforward or conversely very difficult. Facility decisions can likewise ease the procedures for authentication since reliable and effective monitoring systems and tampering indicating devices can help provide the assurance needed in the integrity of such items as measurement systems, …

This report provides the resluts of detailed hydrologic characterization tests conducted within eleven Hanford Site wells during fiscal year 2000. Detailed characterization tests performed included groundwater-flow characterization; barometric response evaluation; slug tests; single-well tracer tests; constant-rate pumping tests; and in-well, vertical flow tests. Hydraulic property estimates obtained from the detailed hydrologic tests include transmissivity; hydraulic conductivity; specific yield; effective porosity; in-well, lateral flow velocity; aquifer-flow velocity; vertical distribution of hydraulic conductivity (within the well-screen section); and in-well, verticla flow velocity. In addition, local groundwater-flow characteristics (i.e., hydraulic gradient and flow direction) were determined for four sites where detailed well testing was performed.

Effects of oceanographic conditions, as well as effects of release-timing and release-size, on first ocean-year survival of subyearling fall chinook salmon were investigated by analyzing CWT release and recovery data from Oregon and Washington coastal hatcheries. Age-class strength was estimated using a multinomial probability likelihood which estimated first-year survival as a proportional hazards regression against ocean and release covariates. Weight-at-release and release-month were found to significantly effect first year survival (p < 0.05) and ocean effects were therefore estimated after adjusting for weight-at-release. Negative survival trend was modeled for sea surface temperature (SST) during 11 months of the year over the study period (1970-1992). Statistically significant negative survival trends (p < 0.05) were found for SST during April, June, November and December. Strong pairwise correlations (r > 0.6) between SST in April/June, April/November and April/December suggest the significant relationships were due to one underlying process. At higher latitudes (45{sup o} and 48{sup o}N), summer upwelling (June-August) showed positive survival trend with survival and fall (September-November) downwelling showed positive trend with survival, indicating early fall transition improved survival. At 45{sup o} and 48{sup o}, during spring, alternating survival trends with upwelling were observed between March and May, with negative trend occurring …

This report describes a new initiative to strengthen the technical defensibility of predictions made with the Hanford site-wide groundwater flow and transport model. The focus is on characterizing major uncertainties in the current model. PNNL will develop and implement a calibration approach and methodology that can be used to evaluate alternative conceptual models of the Hanford aquifer system. The calibration process will involve a three-dimensional transient inverse calibration of each numerical model to historical observations of hydraulic and water quality impacts to the unconfined aquifer system from Hanford operations since the mid-1940s.

Using the pre-2000 reach survival probabilities reported in the 2000 FCRPS Biological Opinion (BO) for three selected stocks: yearling and sub-yearling chinook and steelhead, power curves were constructed for each of the two statistical hypothesis tests suggested in the BO. These power calculation results were interpreted in terms of the ability of the statistical tests to correctly identify the true states of recovery (i.e., fail or succeed in fulfilling RPA expectations). The proposed one-sided tests have a moderate to low probability of correctly assessing the true status of the recovery by the years 2005 and 2008. The relatively poor odds of making the correct decision with the BO proposed Tests 1 and 2 suggest alternative decision rules need to be investigated and developed for assessing RPA compliance. Therefore, we propose to immediately examine alternative decision rules that might maximize the likelihood of correct decisions while minimizing the prospect of incorrect decisions. The Bayesian analysis will incorporate scientific/biological knowledge/expertise.

This document presents the climatological data measured at the U.S. Department of Energy's Hanford Site for calendar year 2000.

This report investigates the feasibility of using computational fluid dynamics (CFD) tools to investigate hydrodynamic flow fields surrounding the tailrace zone below large hydraulic structures. Previous and ongoing studies using CFD tools to simulate gradually varied flow with multiple constituents and forebay/intake hydrodynamics have shown that CFD tools can provide valuable information for hydraulic and biological evaluation of fish passage near hydraulic structures. These studies however are incapable of simulating the rapidly varying flow fields that involving breakup of the free-surface, such as those through and below high flow outfalls and spillways. Although the use of CFD tools for these types of flow are still an active area of research, initial applications discussed in this report show that these tools are capable of simulating the primary features of these highly transient flow fields.

PNNL conducted a walk-through audit of Marine Corps Air Station at Camp Pendleton. The audit inspected a significant portion of the site and identified a large number of similar energy saving opportunities across all building types.

This report describes tests conducted at Bonneville Dam on the Columbia River in the spring of 2000 using three-dimensional acoustic telemetry and computational fluid dynamics hydraulic modeling to observe the response of outmigrating juvenile steelhead and yearling chinook to a prototype surface collector installed at the Powerhouse. The study described in this report was one of several conducted for the U.S. Army Corps of Engineers to prepare a decision document on which of two bypass methods: surface flow bypass or extended-length submersible bar screens to use to help smolts pass around Bonneville dams without going through the turbines.

We conduct a comparative experimental analysis of three well known media access protocols: 802.11, CSMA, and MACA for wireless radio networks. Both fixed and ad-hoc networks are considered. The experimental analysis was carried out using GloMoSim: a tool for simulating wireless networks. The main focus of experiments was to study how (i) the size of the network, (ii) number of open connections, (iii) the spatial location of individual connections, (iv) speed with which individual nodes move and (v) protocols higher up in the protocol stack (e,g. routing layer) affect the performance of the media access sublayer protocols. The performance of the protocols was measured w.r.t. three important parameters: (1) number of received packets, (2) average latency of each packet, and (3) throughput. The following general qualitative conclusions were obtained; some of the conclusions reinforce the earlier claims by other researchers. (1) Although 802.11 performs better than the other two protocols with respect to fairness of transmission, packets dropped, and latency, its performance is found to (i) show a lot of variance with changing input parameters and (ii) the overall performance still leaves a lot of room for improvement. (2) CSMA does not perform too well under the fairness criteria, however, …

The U.S. Department of Energy's Idaho National Engineering and Environmental Laboratory is storing large amounts of radioactive and mixed wastes. Most of the sodium-bearing wastes have been calcined, but about a million gallons remain uncalcined, and this waste does not meet current regulatory requirements for long-term storage and/or disposal. As a part of the Settlement Agreement between DOE and the State of Idaho, the tanks currently containing SBW are to be taken out of service by December 31, 2012, which requires removing and treatment the remaining SBW. Vitrification is the option for waste disposal that received the highest weighted score against the criteria used. Beginning in FY 2000, the INEEL high-level waste program embarked on a program for technology demonstration and development that would lead to conceptual design of a vitrification facility in the event that vitrification is the preferred alternative for SBW disposal. The Pacific Northwest National Laborator's Research-Scale Melter was used to conduct these initial melter-flowsheet evaluations. Efforts are underway to reduce the volume of waste vitrified, and during the current test, an overall SBW waste volume-reduction factor of 7.6 was achieved.

N/A

None

The Lawrence Berkeley National Laboratory (LBNL) has been developing sensors for the pulp and paper industry that uses a magnetic field. The applications for magnetic sensors that have studied include (1) sensors for the measurement of the water and ice content of wood chips entering the pulping mill, (2) sensors for measuring the water content and other constituents of the black liquor leaving the paper digester, and (3) sensors for measuring paper thickness and water content as the paper is being processed. These tasks can be done using nuclear magnetic resonance (NMR). The magnetic field used for doing the NMR can come from either permanent magnets or superconducting magnets. The choice of the magnet is dependent on a number of factors, which include the size of the sample and field strength needed to do the sensing task at hand. This paper describes some superconducting magnet options that can be used in the pulp and paper industry.

Schwertmannite is a poorly crystallized iron oxyhydroxidewith essential structural sulfate that can be a major component in acidmine drainage environments. Original characterization work concluded thatthe sulfate was largely contained within tunnels of an orderedakaganeite-like structure based on powder XRD, analysis of IR spectra,and sulfate extraction procedures [1]. Since the original description,problems have emerged with the nature of the tunnel sulfate, and with theinterpretation of the IR spectra. Other related work has shown that it isnow possible to determine sulfate-iron oxide inner sphere bindingunambiguously from the S K-edge XANES spectrum. Hence a reassessment ofthe evidence for the original schwertmannite structure was deemednecessary and timely.

Bimonthly newsletter from DOE's Office of Industrial Technologies to promote the use of energy-efficient industrial systems.

The objective of this calculation was to determine the structural response of a 12-Pressurized Water Reactor (PWR) Long, a 24-Boiling Water Reactor (BWR) and a 5-Defense High Level Waste/Department of Energy (DHLW/DOE)--Long spent nuclear fuel waste packages lifted in a horizontal position. The scope of this calculation was limited to reporting the calculation results in terms of maximum stress intensities in the trunnion collar sleeves. In addition, the maximum stress intensities in the inner and outer shells of the waste packages were presented for illustrative purposes. The information provided by the sketches (Attachments I, II and III) is that of the potential design of the types of waste packages considered in this calculation, and all obtained results are valid for these designs only. This calculation is associated with the waste package design and was performed by the Waste Package Design Section in accordance with the ''Technical work plan for: Waste Package Design Description for LA'' (Ref. 7). AP-3.12Q, Calculations (Ref. 13), was used to perform the calculation and develop the document.

This report documents experiments and analyses that have been done at the Idaho National Engineering and Environmental Laboratory (INEEL) to measure the steam chemical reactivity of two types of carbon fiber composites, NS31 and NB31, proposed for use at the divertor strike points in an ITER-like tokamak. These materials are 3D CFCs constituted by a NOVOLTEX preform and densified by pyrocarbon infiltration and heat treatment. NS31 differs from NB31 in that the final infiltration was done with liquid silicon to reduce the porosity and enhance the thermal conductivity of the CFC. Our approach in this work was twofold: (1) physical characterization measurements of the specimens and (2) measurements of the chemical reactivity of specimens exposed to steam.

The qualification is being completed in accordance with the Data Qualification Plan DQP-NBS-GS-000006, Rev. 00 (CRWMS M&O 2001). The purpose of this data qualification activity is to evaluate for qualification the unqualified developed input and porosity output included in Data Tracking Number (DTN) M09910POROCALC.000. The main output of the analyses documented in DTN M09910POROCALC.000 is the calculated total porosity and effective porosity for 40 Yucca Mountain Project boreholes. The porosity data are used as input to Analysis Model Report (AMR) 10040, ''Rock Properties Model'' (MDL-NBS-GS-000004, Rev. 00), Interim Change Notice [ICN] 02 (CRWMS M&O 2000b). The output from the rock properties model is used as input to numerical physical-process modeling within the context of a relationship developed in the AMR between hydraulic conductivity, bound water and zeolitic zones for use in the unsaturated zone model. In accordance with procedure AP-3.15Q, the porosity output is not used in the direct calculation of Principal Factors for post-closure safety or disruptive events. The original source for DTN M09910POROCALC.000 is a Civilian Radioactive Waste Management System (CRWMS) Management and Operating Contractor (M&O) report, ''Combined Porosity from Geophysical Logs'' (CRWMS M&O 1999a and hereafter referred to as Rael 1999). That report recalculated porosity results for …