Report discussing the effectiveness of various methods for removing plutonium from contaminated gloves. The cost of decontaminating the gloves using the most effective method was three times the cost of new gloves, and "consumer resistance" was noted among users of treated gloves.

From abstract: This report describes a conceptual design for an Advanced Engineering Test Reactor. The reactor is a large graphite assembly penetrated by parallel Zircaloy tubes through which flow as heavy water solution of uranyl sulfate. Reactor power is 220 megawatts.

"This document contains reproductions of technical papers on some of the most recent research results on aircraft loads, flutter, and structures from the NACA laboratories. These papers were presented by members of the staff of the NACA laboratories at the Conference held at the Langley Aeronautical Laboratory March 5, 6, and 7, 1957. The primary purpose of this Conference was to convey to contractors of the military services and others concerned with the design of aircraft these recent research results and to provide those attending an opportunity to discuss the results" (p. 6).

From abstract: "On the 86-inch cyclotron a 41-kw beam has been calorimetered at a net ion loading efficiency of 40%; the average proton current was 1.85 ma at 22.5 Mev. Practical specific yields have been determined for (p,2n) reactions on zinc and bismuth. The investigation of products of proton-induced fission of uranium has been continued and new techniques are being used in measuring angular distribution of reaction products. The 63-inch heavy particle cyclotron is now in operation; N+++ particles have been accelerated to ~25 Mev. In preliminary tests, induced activities have been detected in carbon, nitrogen, and oxygen targets. A hot-cathode ion source is ready for test operation. The 22-inch cyclotron is being used in an investigation of the problems associated with the use of rf and dc electrodes for the acceleration of protons from the ion source into the dees. Radiation-induced corrosion in Inconel tubing containing #21 eutectic (ANP) has been produced by proton irradiation in the 86-inch cylclotron; it is shown that the corrosion was not due to thermal effects. Approximately 150 grams of highly purified U 238 (< 5 ppm U 235) have been prepared, and two grams of thorium 230 (ionium) has been enriched to 90.6%."

Report that discusses the possibility of testing the T-invariance in μ-meson decay. The author describes a past experiment performed by Lee and Yang, as well as the specifics of the proposed experiment to test the time reversal in μ-meson decay.

From introduction: "The containment of a charged particle in a mirror field has been studied analytically and numerically. Formulas are presented which give the change in the magnetic moment as it passes from one end of the machine to the other."

The following report contains two reports to summarize a thesis: first, a report describing the classical moment techniques of Tchebycheff, Markov, and Stieltjes that have been applied to the problem of diagonalizing the Hamiltonian operator; and the second report describes an investigation of the higher-order corrections to the mesic disintegration of deuterons that is considered.

Report that discusses the possibility of testing the T-invariance in β-meson decay. The author describes a past experiment performed by Lee and Yang, as well as the specifics of the proposed experiment to test the time reversal in β-meson decay.

This report presents the high-temperature plasma research, aimed mainly toward controlled thermonuclear reactions, that have been greatly facilitated by the development of a number of microwave diagnostics, based on previous plasma microwave studies but mostly on ideas generated at UCRL in conjunction with the AEC Project Sherwood.

The following report describes a thermonuclear reactor based on the use of a long layer of rotating relativistic electrons to confine and heat the plasma.

Abstract: "The experimental formation of the dynamic pinch has been an art based upon available electrical condensers, available glass and quartz tubing and an empirically determined gas pressure range. This report attempts to correlate some of this empirical information with the processes of ionization, insulator wall heating, magnetic field penetration, and shock hydrodynamics."

Abstract: Mine mapping of the tyuyamunite-type deposits In the Salt Wash member of the Jurassic Morrison formation of the Lukachukai Mountains, Apache County, Arizona revealed recognizable spatial relationships between ore mineralization and: fractured areas, sedimentary features, and interstitial carbonate.

From introduction: This report details the results of the post-irradiation examination of a test involving one defected rod and one undefected rod.

From abstract: The response of the reactor to forced oscillations has been investigated with the pile oscillator technique and the data are presently being analyzed.

Report describing technical progress on the design and construction of an Organic Moderated Reactor Experiment (OMRE), to be operated at the National Reactor Testing Station in Arco, Idaho. "This is the first report of the series and coves the period from the initiation of the project to July 31, 1956. Also included as an appendix to the report is a detailed description of the OMRE facility" (p. 3).

From abstract: Impact tests on the Mark III Hanford safety element indicate that the design is mechanically adequate and does not constitute a personnel hazard.

"This report contains a summary of construction of procedures and field observations made during and after construction of Benbrook Dam, a brief review of the original design data, and comparisons of design predictions with performance data" (p. 1). It is part of a series to compare field experience and performance of existing structures with design predictions.

Abstract: This report presents a reference design of an organic moderated and cooled reactor for the propulsion of a 38,000-dwt tanker.

"Comparisons are made of experimental and theoretical zero-lift wave drag for several nose shapes, wing-body combinations, and models of current airplanes at Mach numbers up to 1.0. The experimental data were obtained from tests in the Ames 6- by 6-foot supersonic wind tunnel and at the NACA Wallops Island facility. The theoretical drag was found by use of linear theory utilizing model area distributions" (p. 1).

Report presenting results from pitot-static and hot-wire anemometer surveys at low speed of the flow over a thin, sharp-edge airfoil which simulated a flat plate. The primary purpose was to obtain detailed measurements of the flow associated with the so-called thin-airfoil type of stall. Results regarding the preliminary tests, pressure distributions, mean flow measurements, velocity fluctuation measurements, and observations and measurements of the flow in the immediate vicinity of the leading edge are provided.

Report presenting an investigation in the high-speed hydrodynamics facility to determine whether planing lift coefficient of a flat-bottom planing surface remains constant with increasing speed at the high towing speeds obtainable. The generally accepted assumption that there is no effect of speed on the lift coefficient of positive-pressure lifting surfaces is valid at least up to 170 fps.

Report presenting an investigation at Mach number 2.40 to determine the aerodynamic characteristics of plain overhang balances on flap-type controls. Testing was performed on a two-dimensional wing with three trailing-edge flaps with balance lengths of 38, 60, and 82 percent of the flap chord. The effect of wing-flap gap size were investigated for the flap with 38 percent balance.

Report presenting an experimental investigation in the flutter research tunnel on the oscillating forces and moments on a two-dimensional wing equipped with an oscillating circular-arc spoiler.

From Summary: "A simple inelastic collision model of meteor-atmosphere interaction is used and analytic relations for velocity, deceleration, size, and relative luminous magnitude of meteors are derived and expressed in dimensionless parametric form. The analysis is compared with available quantitative observations of meteor behavior and it is indicated that a large fraction of the atmospheric bombardment energy is used in eroding meteor material. The erosion from large, high-speed vehicles as they traverse the high-altitude, free-molecule portion of the atmosphere is calculated, on the assumption that the vaporization process is similar to that which occurs for meteors."