The general expression for the angular correlation between radiations produced in successive cascade transitions is derived by use of Racah algebra. The result is then specialized to the beta - gamma correlation and applied to two cases in which additional properties of the photon are specified, the circular polarization and the plane polarization. The prospect of testing time reversal and determining nuclear matrix element ratios by beta - gamma correlation measurements is explored using the nuclide Tm/sup 170/ as an example. The directional angular correlation between the 2.31-Mev beta and the subsequent 0.605-Mev gamma emitted in the decay of Sb/sup 124/ was measured as a function of the beta energy. The K-conversion coefficient of the 279-kev gamma following beta decay of Hg/sup 203/ was measured by comparing the x-ray and gamma intensities in a scintillation spectrometer. The measured valve of alpha /sub k/ = 0.195 plus or minus 0.014 indicates that the transition is M1 with E2 mixed to the extent of 63%. The angular correlation of the 107-1.24 Mev gamma cascade in Zn/sup 68/ following the decay of 68-min Ga/sup 68/ is shown. The Legendre polynomial expansion coefficients were deter-gular correlation in the decay of Sb/ sup 118/ was …

Work during this report period includes a continuation of the study of the effect of krypton 85 on the polymerization of styrene; an attempt at evaluation of the polymers produced; and the effect of krypton radiation on the electrical properties of gases, such as the rare gases, and nitrogen, and oxygen. the results obtained are summarized in the report.

The overall scope of the program encompasses both research into the physical parameters involved in the collection of airborne radioactive particles and the development, fabrication and calibration of balloon-borne sampling equipment to enable the precise determination of stratospheric particle concentration and particle size distribution.

Lithium fluoride crystals were quenched into silicone oil from near the melting point. The return to an equilibrium structure during annealing was observed by means of mechanical tests and etching techniques. Crystals containing three levels of impurity, zone refined, commercially pure, and doped with 0.05 mole per cent magnesium, were used in order to separate the effects of foreign ions from those of thermal vacancies. The changes of mechanical properties produced by quenching and by subsequent annealing were generally attributable to point defect-dislocation interactions. Precision density determinations indicated that about 10% of the equilibrium concentration of vacancies at the melting point was retained at room temperature by the quench. The density could be restored to its normal value by annealing. Two important annealing stages were observed. At about 200 deg C the precipitation of impurities retained in solution by the quench caused a sharp increase in the hardness as measured at room temperature. Isothermal annealing revealed the hardening process to have an activation energy of about 0.5 ev which is probably the energy for migration of an associated magnesium ion-lithium vacancy pair. Between 300 and 400 deg C the removal of dislocations and probably vacancy clusters resulting from the quench …

SNAP II is the designation for a nuclear auxiliary power unit, designed primarily for utilization in the WS117L satellite vehicle. The SNAP II system consists of a reactor heat source, a mercury Rankine engine, and an alternator. Dynamic analysis of the power conversion system was conducted utilizing a comprehensive analog computer simulation. Feasibility of a parasitic load control for numerous system disturbances was demonstrated. This analysis was performed under a subcontract to to Atomics International as part of the Atomic Energy Commission Contract No. AT(11-1)-GEN-8.

SNAP II is the designation for a 3 KW nuclear auxiliary power unit to be used in a satellite vehicle. The SNAP II system consists of a reactor heat source, a mercury Rankine engine and an alternator. A two stage, full admission, axial flow turbine was chose for the APU application. Design details and test results are presented in this report. This work was performed under a subcontract to to Atomics International as part of the Atomic Energy Commission Contract No. AT(11-1)-GEN-8.

The lubrication equations for an arbitrary Newtonian fluid are derived directly from the general equations for conservation of mass, momentum, and energy. From the lubrication equations an inequality is obtained for the internal film temperature rise, after which the isothermal film equations are derived. Then, for perfectly-aligned self-acting journal bearings, a conservation equation is obtained. For gas bearings this condition gives: [formula] constant along the axis of the bearing. Application of this condition to the infinitely-long gas bearing gives more accurate pressure solutions for this case. The Katto-Soda form of the differential equation for the infinitely-long bearing is solved by a series expansion in the eccentricity ratio, the first terms of which give the original, approximate Katto-Soda solution. In addition, solutions obtained numerically by digital computations are presented in graphical and tabular form for eccentricity ratios from 0 to 0.9 and compressible bearing parameter [formula]. Design charts based on these calculations are provided.