The following report provides the design and workings of a heavy-ion accelerator designed to accelerate particles of atomic weight 12 through 20.

This report follows the study of a perturbation in the fringing magnetic field of a synchrocyclotron, using the computed unperturbed orbits of the modified Berkeley 184-inch synchrocyclotron, and introduces the peeler extraction to overcome limitations by using a perturbation that recedes with increasing radial amplitude.

Thesis presenting data taken on experimental nuclear magnetic moments for beta spectra of the mirror nuclei with A-19 to 39.

The following report provides results from investigations on the operation of the power supply for the Bevatron Magnet as well as maintenance problems.

Abstract: "Formulas are derived for the trajectory of a charged particle in a magnetic field which is a linear function of time. Graphs of certain functions are presented, by means of which a trajectory with given initial position and velocity may be plotted."

Abstract: "The free energy (surface tension) of a liquid film can withstand atmospheric pressure across a maximum theoretical gap of 10-(-3) cm between solids if the liquid wets and bridges the sides of the gap continuously. The eutectic alloy of Ga, lm and Sm is used for this purpose. This alloy is molten at room temperature with surface tension > 500 dynes/cm, vapor pressure < 10-(-8) cm at 500 C and excellent wetting properties. This alloy can be utilized in valves, motion seals, flanged joints and for electrical contacts mounted in any position. Using ultrasonic soldering techniques without heat or flux this alloy is readily wetted on W, Mo, Ta, pyrex, quartz and certain ceramics. These materials will withstand the corrosive action of this alloy at at least 400 C. Some de-wetting has been observed with only the nonmetals at high temperatures. This de-wetting may be due to thermal decomposition of gallium oxide. Stainless steel is easily wetted, but is attacked at temperatures above 300 C. Copper and brass are attacked at room temperature."

The following document provides measurements, equations and figures describing the minimum power coil geometries for D.C. magnetic mirrors.

Abstract: "A scheme is discussed in which D+ ions would be accelerated to about 100 kev in a conventional accelerator, then be sent through a gas target frmo which about half the ions would emerge neutral with very little scattering or energy loss; the neutral beam would then cross into a magnetic field and part of the atoms would be ionized and trapped by colliding with the already trapped ions. The smallest mirror machine with a central field of 30-40 kilogauss, 2;1 mirror ratio and β = 01 to 0.5 that would trap most of the neutral beam in the steady state, would be about a meter in diameter and require the order of hundreds of amperes of D+ ions into the neutralizer. The smallest stellerator with a field of 30 kilogauss and β = 0.1 that would trap most of the neutral beam would be about a meter long and require about 10 amperes of D+ ions. A preliminary mirror machine experiment that might be done using the 1/2-ampere, 100-kev D+ beam from the UCRL spare MTA injector is discussed. A method of starting these machine is discussed."

"High energy injection into Table Top is discussed for the case in which the ion sources are to be located inside the mirrors in the mirror region. Two typical ion source geometries are considered. maximum time intervals available for injection indicated are on the order of 7 to 25 microseconds."

Abstract: "The cross section for the production of 2.61-Mev gamma rays from the Pb-208(n, n')Pb-208* reaction has been measured for five different angles from 50 to 130 degrees. The angular distribution appears to be isotropic within the precision of the experiments, and leads to an integrated cross section of 25.5 +/- 4.6 millibarns."

Abstract: "Design problems peculiar to fusion research are discussed. Particular emphasis is placed on the development of large energy storage systems, transfer of and utilization of this energy. In addition, design criteria for delay systems, data reduction systems, and other problems related to our fusion research program are discussed."

Abstract: "This paper describes an electrical readout, decade counter employing the magnetron beam switching tube with transistor drive. Double pulse resolution is one microsecond. The unit will accept a variety of transistor types and will tolerate supply voltage variations of +/- 20% at ambient temperatures up to 60 C. A "Pixie" neon indicator is driven without the use of additional transistors. A readout circuit for printer on punched paper tape is presented."

The following document describes the usage and purpose of the neutron diffusion theory reactor program 9-Zoom, a memory-contained program that takes advantage of 709 features such as, for example, preferential order of multiply by zero, and for small problems approaches input-output limitations with excellent convergence properties.

Abstract: "The hydromagnetic energy principle is applied to the derivation of necessary and sufficient conditions for the hydromagnetic stability of a linear pinch with distributed plasma current (a diffuse linear pinch). The results are quite general in that the axial and azimuthal components of the magnetic field, which determines the structure of the pinch completely, are treated as arbitrary functions of distance from the axis. For purpose of illustration, the general results are applied to the limiting case of a pinch with the plasma current confined to an infinity thin layer (a sharp pinch)."

The following report is based on work performed under the auspices of the U.S. Atomic Energy Commission. The purpose of this report is to describe an air-core strong focusing synchrotron and its functions.

This report describes the development and design of a large bakeable valve that is based on a unique seat arrangement and a novel motion seal.

Progress report on programs in target research and in accelerator research.

The purpose of this report is to describe a method of obtaining deuterons from the 184-inch cyclotron of higher energy than can be achieved from direct acceleration.

This report was written from the notes used by Dr. York in delivering his three lectures on considerations pertinent to the problem of utilizing controlled thermonuclear reactions for the production of power. The first lecture discussed fundamental properties of the DD and DT reactions and the reacting substances. The second lecture described the stellarator, a proposed machine for the controlled production of power from the above reactions. The third lecture described the pinch effect and considered its possible application to the thermonuclear power problem.

Quarterly report on projects - special M.T.A. distribution

Let F be the flux of radiation going from a sample of radius R2 to a counter of radius B1 then the emitted intensity of radiation per unit solid angle. Then the flux between two elements of area do1 and do2 will be given by [equation] since [equation] and [equation]. Calculations and equations follow.

Sparking: The most obvious conclusion about 200 m.c. sparking is that it follows strictly surface gradient and does not depend upon total voltage. In order to arrive at this conclusion, a quantitative means for measuring the probability of sparking had to be constructed, since it was clearly evident that the d.c. notion of sparking was inadequate.

American Mining Congress 9/24/58. Summary. Results of a recent underground test by the Atomic Energy Commission indicate possible applications of nuclear energy in mining and allied industries. The safety, feasibility and economy of nuclear detonations have been demonstrated and further considerations reveal a number of interesting situations which might lend themselves to the use of this new type of explosive. Possible applications include stripping, crushing, quarrying, and the exploitation of petroleum products, water resources, and low-grade ore deposits. The heat reservoir created by the explosion might be used to produce steam (and power) to promote the recovery of oil or tar. The mining industry can supply know-how and test sites for future tests.

The present studies are carried out in order to elucidate the effect on enzyme activity of different kinds of radiation. Beams of protons and alpha particles from the Berkeley 60-inch cyclotron and beams of accelerated nuclei of helium, carbon 12, oxygen 16, and neon 20 from the Berkeley Heavy Ion Linear Accelerator (HILAC) have been used. With this variety of particles it has been possible to cover a range of LET 10 times greater than previously utilized in similar studies. The unattenuated energy of the different particles is exactly 10 MeV per nucleon for the HILAC radiation and approximately this value for the cyclotron radiation.