This paper presents the results of a series of buckling measurements involving the use of enriched uranium rods (1.007% by weight U²³⁵) in light water. The effect of replacing a water reflector with one of uranyl nitrate solution of two different concentrations, 536 and 188 grams of U per liter of solution was investigated for the 0.925" rods with the 1.74 H₂O/U-volume ratio in the core. Some information was also obtained on the extrapolation length to be used in unreflected cases. The application of theory to these lattices, and others, is given in an appendix under separate title, "Buckling Calculations for One Per Cent Enriched Uranium-Water Rod Lattices."

Among the safety considerations for the Purex plant is the question of flammability limits for the diluent-air system. The present note attempts to delineate the temperature regions of concern by utilizing hydrocarbon flammability data available together with information on the vapor pressures of the systems.

The purpose of this document is to review the stud situation at Purex and make such recommendations as possible for use in any future canyon installations.

This report provides an overview of a gridded ionization chamber, instructions on how to operate the instrument, and then discusses the performance of the instrument so far.

The work of the BNL Waste Processing Development Project has been concerned with developing means to accomplish three main objectives in handling radiochemical wastes. One is to reduce the corrosiveness of the waste. At present some wastes must be stored in SS vessels at high cost, since other tankage would not resist corrosion for any length of time. Hanford has solved a part of this problem by storing a neutralized or alkaline waste which can be contained more cheaply in 1020 steel vessels, although neutralization increases its total volume 50 percent over the original acid solution volume. Another aim in waste disposal is to reduce the mobility of the water. Although equipment is checked and double checked, and corrosion resistance is assured by extra thick-walled vessels, the possibility exists that a leak in such storage tanks may develop. At such times the solution may be carried by ground water into populated areas, whereas a relatively immobile waste would remain a local problem. A third and very important consideration is a desirable reduction in total waste volume. Since costs of waste storage are propositional to the volume stored, any reduction in total volume will reduce the total cost.

The biological evaluation of the thermal neutron capture reaction of boron-10, B10 (n,α)Li7 + 2.786 MeV, has previously been studied, using different particles from the boron-10 thermal neutron capture reaction compared with 250 kvp x-rays has been reported as 1.05 for spleen-thymic weight reduction (1), as 1.5 to 2.0 for skin lesions in pigs (2), and 1.87 for skin lesions of the rabbit's ear (3). The significance of such a calculation is felt to be unreliable for the boron-10 reaction in animals because of the vagaries of dose determination resulting from irregular boron distribution, and by the presence of an adventitious irradiation from fast neutrons and capture gammas that is inadequately determined at present. Our present experiment attempts to circumvent the difficulties attendent to studies of the boron-10 reaction in animals by comparing the effect of this reaction on the proliferative capacity of HeLa cells with those produced with 250 kvp x-ray.

In these lectures we will discuss some examples of information about magnetic properties of solids which can be obtained by neutron scattering. We consider a scattering process in which a neutron with wave vector k and spin σ is incident upon a solid in state q>. (Here q stands for all of the quantum numbers which describe the state of the solid, such as spin and orbital electronic states, phonon numbers, etc.) After interacting with the solid, the neutron goes off with wave-vector k' and spin σ', leaving the solid in state q'>. In performing an experiment of this sort one does not usually observe the initial and final spin states of the neutron or the initial and final states of the solid. We must then sum over all possible final states and average over all initial states.

This article presents data on the effects of gamma radiation on the physical properties of a number of different classes of plastics materials of construction which were screened to determine their capabilities and limitations for service in applications where ionizing radiation exists. The irradiations were carried out in air at ambient temperature at normal atmospheric pressure to various gamma radiation doses up to 1*10^9 r depending upon the stability of the materials to radiation exposure. The different classes of materials and materials within a class are compared.

We consider the kinetic isotope effect in three center reactions of the type of A+BC→AB+C. Such model calculations are a good approximation to primary hydrogen isotope effects. For abstraction or transfer reactions, B becomes H, D, or T. The dynamics of the three storm system are calculated for a general quadratic potential, with the assumption that the potential energy is constant along the reaction coordinate (flat top barrier). This model system can be calculated in detail and serves to illustrate the relationship between kinetic isotope effect and chemical bonding in the transition state. The statistical mechanical part of the calculation can be carried out exactly within the framework transition state theory or in any one of a number of approximations. The γ bar method gives particularly good insight into the chemistry of the problem with a minimum of arithmetic.

Optical absorption and photoconductivity measurements have been made on single crystals of pure synthetic rutile (TiO2). Reactor irradiations at 70°C totaling 4.8 x 10 18 nvt fast and 1.69 x10 19 nvt slow did not produce any discernible optical absorption bands; however, the transmission decreased 5 percent at all wavelengths. Reactor irradiation induced a [illegible] five photoconduction peaks in the wavelength range 4200 to 14,000 A. In addition the photopeak at 4065 A (3.05 eV) was enhanced and there were drastic changes in the dependence of photocurrent with light intensity. Gamma-ray irradiations as large as 10 9 r do not change the conduction properties. The photocurrent is proportional to a power of the light intensity; the power range from 0.65 to 1.24, for the crystals described in this work. The photocurrent vs. voltage dependence is more complex.

The present core of the Brookhaven Graphite Reactor consists of some 4900 highly enriched uranium fuel loaded in 615 horizontal fuel channels passing through a 25 foot cube of graphite moderator and reflector. The core is divided into two halves (north and south) by an 8 cm. wide vertical gap in the center of the graphite. The cooling air enters the reactor through inlet filters, at the rate of 270,000 CFM, passes into the central gap and flows bi-directionally through the north and south halves of the core. It then enters the collecting plenums and flows into the north and south ducts. The air is first monitored by the north and south exit air monitors located within the pile building. These are moving filter tape monitors with beta scintillation detectors. They are essentially operational monitors and are maintained by reactor operations. They are essentially operational monitors and are maintained by a reactor operations. The air then passes through the exit air filters, heat exchanger, venturi and on to the fan house where the north and south ducts join. After the fan house the air is monitored by Argon-41 by a Kanne ion chamber syste.

Boron-10 has a high thermal neutron capture cross section (3880 barns). Following neutron capture, the subsequent nuclear disintegration produces an alpha particle and a lithium-7 nucleus with the release of an average of 2.34 MeV for the particle irradiation, and in 93% of the reactions there is also the emission of an 0.48 MeV gamma ray: [equation not transcribed]. The kinetic energy is divided between the lithium-7 nucleus and the alpha particle giving the equal and opposite momentums with a range in tissue of about 8-14μ or approximately 1 cell diameter (1). This fact and the reported favorable partition of boron between tumor and the normal brain suggested a possible therapeutic usefulness which has been investigated clinically. The object of our study is to document the biological effects of the B10 (n,α) Li7 reaction on the brain of dogs injected with boron-10 30 minutes prior to irradiation with thermal neutrons. For this, we felt it desirable to estimate a dose for the boron-10 reaction which if exceeded, produces destruction of normal tissue. This dose could then be a reference dose to be utilized as a maximal limit for the irradiation of normal tissue. We have assured that the largest fluence …

"A method for extracting information on Regge trajectories from experimental data in the analysis of highenergy, small-angle elastic scattering is outlined."

There is but little known about the thermal process involving the dynamics and thermodynamics of the cycling liquid H2 in the chamber and those of the H2 fluid flow in the cooling coil as well as the geometrical characteristics of the chamber body. This the physical equations governing this process are involving so many variables that this analysis becomes rather complex even if simplifying assumptions are made. To those difficulties is added the ignorance even of an approximative expression for some physical quantities such as film heat transfer coefficients entering as major parameters the process equation.

The purpose of this report is to determine the amount of refrigeration capacity required to cool down the 80" bubble chamber from ambient temperature to liquid hydrogen temperature.

The undercarriage system is required for translating, rotating, and lifting the 450 ton magnet and bubble chamber assemblies so that it can be accurately positioned in the experimental proton beam of the synchrotron. The system must make provision for the two magnet sections to be separated for the purpose of adjustment and maintenance of internal components.

The following general description of the theory and operation of a bubble chamber is presented so that firms who are interested in fabricating components for the Brookhaven 80" chamber will have a better understanding of the design parameters associated with it. This understanding, coupled with the fabricator's knowledge of manufacturing techniques, should enable the fabricators to suggest solutions to manufacturing problems consistent with requirements for chamber operation. In an effort to increase knowledge of fundamental nuclear particles and their interactions at high energies, various types of detecting equipment have been developed. One of these detectors recently developed is the bubble chamber. While there are variations as to liquids used, expansion techniques, means of illumination, etc. the basic concepts upon which all bubble chambers operate are similar. Therefore, it will be sufficient in this report to consider only one specific type, that is a chamber using liquid hydrogen

The decontamination of the present Hanford reactors involves a once-through cleaning operation. Considerable interest has also been shown in determining the feasibility of this once-through technique for cleanup of certain portions of the NPR system. This report contains information on a series of tests performed in the 242-B single pass flow facility. Information concerning the following are presented: (1) Efficiency of decontaminating KER Loop 1 and 2 contaminated specimens. (2) Efficiency of decontaminating present reactor pigtails by different methods. (3) Areas that need further study.

Organic compounds with high boiling points and low corrosion qualities have been considered for use as reactor coolants and moderators. Those being considered, however, have a greater tendency to leak than does water. A program to evaluate mechanical closures to be used for a leak-tight system for organic fluids has been established. Report HW-59446 covered descriptions of the facility used in this study and the primary results of tests covering two liquids, fittings, and instrumentation. This report will cover final results and other pertinent information.

A part of the development activities of the Process Equipment Development Group, Chemical Development, HLO through the year 1959 has consisted of test evaluation of some of the never products of manufacturers, design and refinement of novel units to do certain specialized jobs and development of improved components for existing plant equipment. Modification of present chemical processing methods and investigation of new basic procedures have made it necessary to utilize different and "exotic" materials, titanium, has given rise to another problem-- that of the selection of adequate and compatible bearings where the titanium is used as moving or rotating part.

The design of NPR shows large quantities of carbon steel pipe and fittings in the front and rear face areas. These are also the area where the most work must be done during an outage, and consequently lower radiation levels are needed here than elsewhere in the piping system. A single pass decontamination of the front and rear piping without going through the entire loop is desirable. Because of the quantities of chemicals and available down time, an effective shorty interval process is needed. This report gives some recent laboratory data on this subject.

The analyzer can be operated either internally or externally. The 10 ma germanium discriminator is quiescently biased to 8.5 ma in its low-voltage state. An input signal current of 3.5 ma or more triggers it to its high voltage state. This triggers the oscillator. The oscillator signal is buffered and mixed in the bridge modulator with the reference radiofrequency signal from the cyclotron. The low-frequency beat note from the bridge modulator is squared up and passed to the beat zero univibrator which generates 0.7 mu sec signals each time the beat note passes through zero from positive to negative. The trailing edge of the beat zero univibrator is employed to terminate the time-of-flight measurement and to control the servo measurement. Drawings are included. (M.C.G.)

During the past five years, potentialities of space travel have greatly increased and new knowledge has become available regarding the nature of cosmic radiation. In the present article the knowledge pertinent to dose evaluation is reviewed for conditions of flight in space in the vicinity of the earth but away from the influence of its atmosphere or magnetic field. Certain properties of the heavy nuclei are also discussed as well as some of the available information on their actual biological effects. Development and completion of the new Heavy Ion Linear Accelerator allows extension of quantitative biological work with these particles. Finally, the statistical nature of the hazard from cosmic radiations and the limitations of space flight due to such rays are discussed.

This report is a comparative cost study of radioactive waste disposal for the Lawrence Radiation Laboratory (UCRL). In particular, it compares the costs of sea disposal in depths of 1000 fathoms and of 2000 fathoms off the California coast with land burial of the wastes at the Hanford Atomic Products Operation (HAPO), Richland, Washington, at the National Reactor Testing Station (NRTS), Idaho Falls, Idaho, or at the Nevada Test Site (NTS), Nevada. In the comparison, the cost of utilizing a commercial waste-disposal firm is also shown as well as a tentative cost of using the Military Sea Transport Service (MSTS).