Report issued by the Bureau of Mines regarding studies conducted on lead-zinc mines in Stevens County, Washington. As stated in the introduction, "this report presents the factual data obtained from the trenching and sampling operations" (p. 1). This report includes tables, maps, and illustrations.

Report issued by the Bureau of Mines over studies conducted on the zinc-lead deposits in Cherokee County, Kansas. As stated in the introduction, "the purpose of this report is to present the factual data derived from both the preliminary examination and the subsequent field work." (p. 3). This report includes tables, and maps.

Report issued by the Bureau of Mines regarding studies conducted on iron deposits located in Meagher County, Montana. As noted in the introduction, "details of geology, sampling, and beneficiation tests are presented in this report" (p. 1). This report includes tables, maps, and illustrations.

Report issued by the Bureau of Mines on the motor-fuels sold during the summer months of 1947. The types of fuels sold, and characteristics of the fuel samples obtained are listed. This report includes tables, and graphs.

Report issued by the Bureau of Mines over exploration of iron ore deposits in four counties in Georgia. The physical features, geology, and analysis of ore samples are presented. This report includes tables, and maps.

Report issued by the Bureau of Mines over exploration of iron ore deposits in four counties in Georgia. The work accomplished during the summer of 1945 in these deposits is presented. The report describes physical features, geology, and characteristics of the ore samples collected. This report includes tables, maps, and illustrations.

Report issued by the U.S. Bureau of Mines on energy consumption in the western United States. A focus on coal as the primary energy source is presented. This report includes tables, graphs, maps, and illustrations.

Report issued by the U.S. Bureau of Mines on the motor fuels sold in the summer of 1945. Analysis of the properties of fuel samples collected is presented. This report includes tables, graphs, and a map.

Abstract: "This report describes work done to improve the casting characteristics of methyl methacrylete resin under CMR-6-18 authorization. The experimental program was initiated with the objectives of decreasing casting time, bubble formation and shrinkage. It has been found that by use of a common solvent for monomer and polymer concentration in monomer can be attained greater than any previously reported in preparation of a methacrylate casting resign. Incorporation of this greater amount of polymer has produced the desired effects. A bibliography of relevant literature is included to which reference is made in the text."

The following report describes two rapid, micro methods for the determination of UNH in Redox waste samples that had been developed fir the concentration range 0.2 to 100 g/l.

Abstract. thorium can be precipitated as a salt of p-dimethylaminoazophenylarsonic acid at a pH of about 1.5. the precipitate, collected on a sintered glass filter is washed with dilute ammonium hydroxide to dissolve the dye. the amount of thorium is determined by measuring the concentration of the dye spectrophotometrically at a wavelength of 450 millimicrons. Zirconium, which interferes, can be separated and determined using the same reagent in strong hydrochloric. the behavior of thorium metal upon treatment with various acids and upon fusion withKHSO4 is described. three satisfactory procedures are given for dissolving the metal with sulfuric acid, phosphoric acid, and by a potassium hydrogen sulfate fusion. The laboratory was presented with the problem of analyzing for a large number of elements in O2 metal. the results of a systematic study of methods for effecting solution of the metal are offered here since they may be of some interest and use to other laboratories. The four methods which effected complete solution of the metal are (1) Sulfuric acid method; (2) Fusion method; (3) Phosphoric acid method; and (4) Nitric acid-hydrofluoric acid method.

Abstract. Experimental work was carried out to improve material conversion efficiency and to reduce handling costs inherent in the present process for production of high purity calcium. Charges up to 54 pounds were handled successfully in the equipment available. Material losses were reduced and more complete removal of alkali and alkaline earth metals was effected by controlled pressures of inert gas and by melting under positive pressure of Argon.

Technical report. Numerous application of various column adsorption techniques to inorganic analytical chemistry have appear in the literature. The comparatively recent introduction of ion exchange resins has resulted in the development of efficient, simple, and rapid column adsorption methods. the principal service of column adsorption methods to analytical chemistry is that of providing a relatively simple means of separating an element in a sufficiently pure state so that a direct precipitation, ignition, and weighting, for example, will suffice to complete the quantitative analysis. Systems involving uranyl nitrate will naturally be emphasized in this report but information will be included concerning the separation of the individual members of a series from one another, such as in the alkaline earths and the rare earths.

The critical mass of 94-239 and the corresponding critical dimensions of homogeneous mixtures of 94-239 with various moderating media been calculated as a function of the concentration of 94. A simple transformation makes the figures applicated to92-235. the results are in essential agreement with the preliminary estimated made independently by Oppenheimer and Serber. The problem of the stability of a chain reaction in solution and questions of protection are discussed.

Abstract. Some rather idealized considerations are given regarding the depth a warped rod presses into the ribs at the places of contact. It appears that this distance may, under some conditions, be of the order of 70 times greater than for a straight rod resting uniformly on the ribs.

Abstract. the Laplacian of a beryllium metal lattice with 3.3 kg of uranium metal per cell and a volume ratio of 17.2 was measured in the removable region of the CP-2 machine. the sandwich effect with different moderators made interpretation of the observations very uncertain. The best result found was Be = 407 x 10(-6) cm(-2).

Historical: This process is based on experimental work done in Jackson Laboratory, Send Works, Blue Products, and East Area. It supersedes the Tentative Chambers Works Process for the Manufacture of Fluorine Using Carbon Anode Units, dated December 2, 1943.

Map of the United States and surrounding areas with time zones marked and labeled in red. Bodies of water are marked, with depth marked by hatchures, as well as state lines and major cities..

This report discusses two methods used for experimental determination of the interfacial tension of an immisible aqueous-organic system where the density of the organic phase is less than that of the aqueous phase. The methods discussed are the falling drop method and the Donnan modification/rising drop method.

From introduction: "The purpose of this report is to summarize some of the information obtained to date on the distribution of the uranium in the mineral phases of the phosphate rocks and shale."

The following report discusses an investigation that was made to determine the tensile and the compressive properties of a large number of 24ST extruded shapes selected at random from commercial production in order to investigate the interrelation of these properties.

From Summary: "A theoretical analysis is presented that permits estimation of the changes in piston-temperature distribution induced by variations in the crown thickness, the ring-groove-pad thickness, and the undercrown surface heat-transfer coefficient. The analysis consists of the calculation of operating temperatures at various points in the piston body on the basis of the experimentally determined surface heat-transfer coefficients and boundary-region temperatures, as well as arbitrarily selected surface coefficients."

Abstract: This discussion concerns the operation, construction, and servicing of an alpha rate meter of medium sensitivity (30,000 alpha particles full scale per minute) and good stability. The instrument is equipped with an oscillator which increases both in frequency and loudness as the alpha activity is increased. The oscillator circuit includes an anticipator which causes a change in frequency depending directly upon the rate of change of alpha activity. Maximum sensitivity is approximately 100 millivolts full scale. Grid current varies from 1 to 5 x 10^-14 amperes. A general discussion of time constants and accuracy is included. Tables of stopping power, ionization and alpha activity are appended.

The following report analyzes and calculates the accuracy of a procedure that processes independent source neutron cards in the Monte Carlo method.