During recent years most of the successful developments in pyrethroids have been primarily concerned with structural or compositional variations. As a part of our continuing interest in pyrethroid insecticides, nitrogen-containing compounds having pyrethroid-like structures were synthesized. Seven prolinate compounds, N-(substituted)-phenyl-prolinates and N-carbobenzoxy-prolinates were coupled with known pyrethroid alcohols. These structural variations which "locked in" a specific conformation between the nitrogen and chiral a-carbon in the acid moiety of fluvalinate were studied to determine the influence of certain conformations on insecticidal toxicity. The toxicity data for the prolinate compounds showed intermediate mortality against nonresistant cockroaches. It was concluded that the conformation imposed by the proline ring portion of the esters was probably close to the favored conformation for interaction of fluvalinate-like pyrethroids with the insect receptor site. A second series of nitrogen-containing compounds, twenty-five carbamate esters resulting from the condensation of N-isopropyl-(substituted)-anilines and N-alkyl-(substituted)-benzylamines with appropriate pyrethroid alcohols were studied for insecticidal activity. These studies were conducted on pyrethroid-susceptible houseflies. Some of the carbamate esters exhibited high toxicity when synergized by piperonyl butoxide. For example, the toxicity ( LD 50 ) of O-a-cyano-3-phenoxyfaenzyl-N-a,a-dimethyl-4-bromo-benzyl carbamate was 0.012 ug/g, which is significantly greater than that reported for the potent pyrethroid, fenvalerate. Correlations of …

One objective of this study was to explore the intramolecular [2+2] cycloadditions of phenoxyketenes to carbonyl groups with isoflavones and benzofurans as target compounds. The other objective was to investigate the eyeloaddition reactions of rarely studied aminoketenes. The conversion of 2-(carboxyalkoxy)benzils to the corresponding phenoxyketenes leads to an intramolecular [2+2] cycloaddition to ultimately yield isoflavones and/or 3-aroylbenzofurans. The product distributions are dependent upon the substitution pattern in the original benzil acids. The initial cycloaddition products, β-lactones, are isolated in some instances while some β-lactones spontaneously underwent decarboxylation and could not be isolated. The ketene intermediate was demonstrated in the intramolecular reaction of benzil acids or ketoacids with sodium acetate and acetic anhydride. It is suggested that sodium acetate and acetic anhydride could serve as a source for the generation of ketenes directly from certain organic acids. The treatment of ketoacids with acetic anhydride and sodium acetate provides a simpler procedure to prepare benzofurans than going through the acid chloride with subsequent triethylamine dehydrochlorination to give the ketenes. N-Ary1-N-alkylaminoketenes were prepared for the first time from the corresponding glycine derivatives by using p-toluenesulfonyl chloride and triethylamine. These aminoketenes underwent in situ cycloadditions with cyclopentadiene, cycloheptene and cyclooctenes to yield only the …

Dimethylsilene, generated from the thermal gas phase reaction of 1,1-dimethyl-1-silacyclobutane, reacts with alkynes to produce silacyclobutenes or acyclic silanes. The temperature dependence of the product ratios have been determined and the relative reactivities of three different alkynes toward the 1,1-dimethylsilene has been determined. 1-Hydrido-1-methylsilene has been generated by gas phase thermal decomposition from three different precursors. Trapping studies with butadiene and trimethylsilane lead to products expected from dimethylsilylene. The most plausible explanation for these observations is that hydridomethylsilenes undergo a facile isomerization to divalent dimethylsilylene. Cycloaddition of 1,1-dimethylsilene to allene at 600°C in a flow vacuum pyrolysis system affords the first synthesis of 2-methylene-1,1-dimethylsilacyclobutane and smaller amounts of six other products. For static pyrolysis at 421°C, the 2-methylene-1,1-dimethyIsilacyclobutane isomerizes to 1,1-dimethylsilacyclopentenes. The kinetics of gas phase thermal decomposition of cyclopropyltrimethylsilane has been studied over the temperature range, 689.6-751.1 K at pressures near 14 torr. The Arrhenius parameters for formation of allyltrimethylsilane are k_1(sec^-1)=10^14.3 ± 0.1 exp(-56.5 ± 0.2 kcal mol^-1/RT) and those for the formation of E- and Z-1-propenyltrimethyIsilane are k_2(sec^-1)=10^14.9 ± 0.3 exp(-61.9 ± 0.8 kcal mol^-1/RT). The difference between activation energies has been interpreted in terms of anchimeric assistance or the β effect of the silicon atom. The …

Pure, MgO doped and B2C3 doped monocalcium, dicalcium, and tricalcium silicates were prepared with different glass contents. Characterization of the anhydrous materials was carried out using optical microscopy, infrared absorption spectroscopy, and X-ray powder diffraction. The hydration of these compounds was studied as a function of the glass contents. The hydration studies were conducted at 25°C. Water/solid ratios of 0.5, 1, 10, and 16 were used for the various experiments. The hydration behavior was monitored through calorimetry, conductometry, pH measurements, morphological developments by scanning electron microscopy, phase development by X-ray powder diffraction, and percent combined water by thermogravimetry. A highly sensitive ten cell pseudo-adiabatic microcalorimeter was designed and constructed for early hydration studies. Conductometry was found to be of great utility in monitoring the hydration of monocalcium silicate and the borate doped dicalcium silicates.

When E- or Z-l-methyl-l-phenyl-2-neopentylsilene was generated by the retro-Diels-Alder vacuum-sealed tube thermolysis of its corresponding anthracene adduct, in the presence of various alkoxysilanes, only one diastereomeric adduct was formed in each case, showing that the reactions are stereospecific. An x-ray crystal structure of the methoxytriphenylsilane adduct of the E-silene confirmed its relative configuration as (R,S) or (S,R). This demonstrated that the addition of alkoxysilanes to silenes is stereospecific and syn. The relative configurations of similar alkoxysilane and alkoxystannane adducts to E- and Z-l-methyl-l-phenyl-2-neopentylsilene were assigned based on a combination of xray structures and *3C NMR data. A strong, nonbonded oxygen-metal interaction is apparent in all of those compounds studied. Treatment of the alkoxystannane adducts with alkyl lithium reagents results in tin-lithium exchange in some cases. The results indicate that the resulting <x-lithio alkoxysilanes are not configurationally stable in either THF or hydrocarbon solvents. The reaction of tert butyl lithium with a-trimethylsilylvinylmethylphenylchlorosilane in hydrocarbon solvents yields E- and Z-l-methyl-l-phenyl-2-neopentyl-2-trimethylsilylsilene. In the absence of any traps these silenes undergo a novel tert butyl lithium catalyzed rearrangement to 2-phenyl-3-trimethylsilyl-5,5-dimethyl-2-silahex-3-ene. These silenes were also trapped as their [4+2] cycloadducts with anthracene. The Z-isomer of the anthracene adduct was separated and its stereochemistry confirmed by …

The preparation of layered double hydroxides via co-precipitation of a divalent/trivalent metal solution against a base results in 1 mm LDH particles with a disorganized metal lattice. Research was performed to address these morphological issues using techniques such as Ostwald ripening and precipitation via aluminate. Another interesting issue in layered double hydroxide materials is the uptake and orientation of anions into the interlayer. Questions about iron cyanide interlayer anions have been posed. Fourier transform infared spectroscopy and powder x-ray diffraction have been used to investigate these topics. It was found that factors such as orientation, anion charge, and anion structure depended on the divalent/trivalent metal ratio of the hydroxide layer and reactivity time. The cyanide self-addition reaction is an important reaction of classical prebiotic chemistry. This reaction has been shown to give rise to amino acids, purines and pyrimidines. At cyanide concentrations similar to that expected on the early earth, hydrolysis to formamide rather than self-addition occurs. One theory to alleviate this side reaction is the use of minerals or clays that are thought to concentrate and catalyze prebiotics of interest. Layered double hydroxides have been studied as a catalyst for this reaction.

Gas phase kinetics of the reactions involving hydroxyl radical and hydrogen atom were studied using experimental and ab initio theoretical techniques. The rate constant for the H + H2S reaction has been measured from 298 to 598 K by the laser photolysis/resonance fluorescence (LP-RF) technique. The transition state theory (TST) analysis coupled with the measurements support the suggestion that the reaction shows significant curvature in the Arrhenius plot. The LP-RF technique was also used to measure the rate constant of the H + CH3Br reaction over the temperature range 400-813 K. TST and density functional theory (DFT) calculations show that the dominant reaction channel is Br-abstraction. The reaction H + CF2=CF-CF=CF2 was first studied by flash photolysis/resonance fluorescence (FP-RF) method. The experiments of this work revealed distinctly non-Arrhenius behavior, which was interpreted in terms of a change in mechanism. DFT calculations suggest that the adduct is CF2H-CF•-CF=CF2. At lower temperatures a mixture of this molecule and CF2•-CFH-CF=CF2 is likely. The theoretical calculations show that H atom migrates in the fluoroethyl radicals through a bridging intermediate, and the barrier height for this process is lower in the less fluorinated ethyl radical. High level computations were also employed in studies of the …

The Semiconductor Industry Association (SIA) has identified the integration of copper (Cu) with low-dielectric-constant (low-k) materials as a critical goal for future interconnect architectures. A fundamental understanding of the chemical interaction of Cu with various substrates, including diffusion barriers and adhesion promoters, is essential to achieve this goal. The objective of this research is to develop novel organic polymers as Cu/low-k interfacial layers and to investigate popular barrier candidates, such as clean and modified tantalum (Ta) substrates. Carbon-silicon (C-Si) polymeric films have been formed by electron beam bombardment or ultraviolet (UV) radiation of molecularly adsorbed vinyl silane precursors on metal substrates under ultra-high vacuum (UHV) conditions. Temperature programmed desorption (TPD) studies show that polymerization is via the vinyl groups, while Auger electron spectroscopy (AES) results show that the polymerized films have compositions similar to the precursors. Films derived from vinyltrimethyl silane (VTMS) are adherent and stable on Ta substrates until 1100 K. Diffusion of deposited Cu overlayers is not observed below 800 K, with dewetting occurred only above 400 K. Hexafluorobenzene moieties can also be incorporated into the growing film with good thermal stability. Studies on the Ta substrates demonstrate that even sub-monolayer coverages of oxygen or carbide on polycrystalline …

A variety of novel cage-functionalized pyridyl containing crown ethers have been prepared for use in selective alkali metal complexation studies. A highly preorganized, cage-functionalized cryptand also has been designed and has been synthesized for use as a selective Li+ complexant. The alkali metal picrate extraction profiles of these cage-functionalized crown ethers also have been studied. Novel cage-functionalized diazacrown ethers have been prepared for selective alkali metal complexation studies. Alkali metal picrate extraction experiments have been performed by using this new class of synthetic ionophores to investigate the effects of cage-annulation and the influence of N-pivot lariat sidearms upon their resulting complexation properties. Novel pyridyl containing calix[4]arene receptors were prepared. Analysis of their respective 1H NMR and 13C NMR spectra suggests that calix[4]arene moieties in the ligand occupy the cone conformation. The complexation properties of these host molecules were estimated by performing a series of alkali metal picrate extraction experiments. An optically active cage-functionalized crown ether which contains a binaphthyl moiety as the chiral unit was prepared. The ability of the resulting optically active crown ether to distinguish between enantiomers of guest ammonium ions (i.e., phenylethylamonium and phenylglycinate salts) in transport experiments was investigated. Hexacyclo[11.2.1.02,12.05,10.05,15.010,14]hexadeca-6,8-diene-4,11-dione was prepared from hexacyclo[7.4.2.01,9.03,7.04,14.06,15] pentadeca-10,12-diene-2,8-dione. Unanticipated …

The focus of this research is to study the interaction between copper and the diffusion barrier/adhesion promoter. The behavior of copper sputter-deposited onto sputter-cleaned tantalum nitride is investigated. The data show that copper growth on tantalum nitride proceeds with the formation of 3-D islands, indicating poor adhesion characteristics between copper and Ta0.4N. Post-annealing experiments indicate that copper will diffuse into Ta0.4N at 800 K. Although the data suggests that Ta0.4N is effective in preventing copper diffusion, copper's inability to wet Ta0.4N will render this barrier ineffective. The interaction of copper with oxidized tantalum silicon nitride (O/TaSiN) is characterized. The data indicate that initial copper depositions result in the formation a conformal ionic layer followed by Cu(0) formation in subsequent depositions. Post-deposition annealing experiments performed indicate that although diffusion does not occur for temperatures less than 800 K, copper "de-wetting" occurs for temperatures above 500 K. These results indicate that in conditions where the substrate has been oxidized facile de-wetting of copper may occur. The behavior of a sputter-deposited Cu0.6Al0.4 film with SiO2 (Cu0.6Al0.4/SiO2) is investigated. The data indicate that aluminum segregates to the SiO2 interface and becomes oxidized. For copper coverages less than ~ 0.31 ML (based on a Cu/O …

The effect of substituents on the stabilities of cumulenes-ketenes, allenes, diazomethanes and isocyanates and related systems-alkynes, nitriles and nitrile oxides is studied using the density functional theory (B3LYP, SVWN and BP86) and ab initio (HF, MP2) calculations at the 6-31G* basis set level. Using isodesmic reactions, correlation between stabilization energies of cumulenes and substituent group electronegativities (c BE) is established and the results from DFT and MP2 methods are compared with the earlier HF calculations. Calculations revealed that the density functional methods can be used to study the effect of substituents on the stabilities of cumulenes. It is observed that the cumulenes are stabilized by electropositive substituent groups from s -electron donation and p -electron withdrawal and are destabilized by electronegative substituent groups from n-p donation. The calculated geometries of the cumulenes are compared with the available experimental data.High level ab initio and density functional theory calculations have been used to study the energetics of low-barrier hydrogen bond (LBHB) systems. Using substituted formic acid-formate anion complexes as model LBHB systems, hydrogen bond strength is correlated to the pKa mismatch between the hydrogen bond donor and the hydrogen bond acceptor. LBHB model systems are characterized by the 1H-NMR chemical shift calculations. …

The purpose of this investigation is to study the Birch reduction products of [2.2lparacyclophane and of [2.2]paracyclophane- 2-carboxylic acid. The tetrahydro Birch reduction product of [2.2]paracyclophane is shown to be dl stereoisomer, with the olefins of the upper deck only partially overlapping with the olefins of the lower deck. This stereochemical elucidation is accomplished by means of a complete proton nmr analysis of the tetraepoxide derivative. A proposed mechanism supported by VB (valence bond) and MO (molecular orbital) theories for this Birch reduction process is presented.

To gain better understanding of the nature of the carbonmetal bonding in 3-neopentylallyl alkali metal (5,5-dimethyl- 2-hexenyl alkali metal) systems, an investigation is extended to 3-neopentylallylpotassium. In addition, pertinent data on the 3-neopentylallyl systems are re-examined in an attempt to understand the trends in the bonding habits, as affected by the solvent, the cation and the temperature.

Many of the bands in the vapor-phase far-ultraviolet absorption spectra of simple molecules can often be fit to mathematical progressions referred to as molecular Rydberg series. The name Rydberg arises from the similarity between the Rydberg formula for the atomic hydrogen spectrum and the formulae for the progressions found in molecular spectra. The theories of molecular Rydberg transitions and states are discussed in terms of the inferences that have been made in the past from the available spectral data. The dipole moment changes (ca. 0.4 Debye units) from the ground state to all of the Rydberg states studied were found to be smaller than changes typically found in transitions of charge-transfer nature (ca. 1 Debye unit). The implication is that the Rydberg transitions are fairly localized. The changes in polarizability are on the order of 6 x 10⁻²⁴ cm³ and are assumed to be increases over those of the ground state.

Computational chemistry has led to the greater understanding of the molecular world, from the interaction of molecules, to the composition of molecular species and materials. Of the families of computational chemistry approaches available, the main families of electronic structure methods that are capable of accurate and/or reliable predictions of energetic, structural, and spectroscopic properties are ab initio methods and density functional theory (DFT). The focus of this dissertation is to improve the accuracy of predictions and computational efficiency (with respect to memory, disk space, and computer processing time) of some computational chemistry methods, which, in turn, can extend the size of molecule that can be addressed, and, for other methods, DFT, in particular, gain greater insight into which DFT methods are more reliable than others. Much, though not all, of the focus of this dissertation is upon transition metal species – species for which much less method development has been targeted or insight about method performance has been well established. The ab initio approach that has been targeted in this work is the correlation consistent composite approach (ccCA), which has proven to be a robust, ab initio computational method for main group and first row transition metal-containing molecules yielding, on …

Aluminum was deposited onto both Teflon AF and Parylene AF surfaces by chemical vapor deposition of trimethylaluminum. This work shows that similar thin film (100 Angstroms) aluminum oxide adlayers form on both polymers at the low temperature dosing conditions used in the studies. Upon anneal to room temperature and above, defluorination of the polymer surfaces increased and resulted in fluorinated aluminum oxide adlayers; the adlayers were thermally stable to the highest temperatures tested (600 K). Angle-resolved spectra showed higher levels of fluorination toward the polymer/adlayer interface region. Copper films were also deposited at low temperature onto Teflon AF using a copper hexafluoroacetylacetonate-cyclooctadiene precursor. Annealing up to 600 K resulted in the loss of precursor ligands and a shift to metallic copper. As with aluminum adlayers, some polymer defluorination and resulting metal (copper) fluoride was detected. Parylene AF and polystyrene films surfaces were modified by directly dosing with water vapor passed across a hot tungsten filament. Oxygen incorporation into polystyrene occurred exclusively at aromatic carbon sites, whereas oxygen incorporation into parylene occurred in both aromatic and aliphatic sites. Oxygen x-ray photoelectron spectra of the modified polymers were comparable, indicating that similar reactions occurred. The surface oxygenation of parylene allowed enhanced reactivity …

The development of the correlation consistent basis sets, cc-pVnZ (where n = D, T, Q, etc.) have allowed for the systematic elucidation of the intrinsic accuracy of ab initio quantum chemical methods. In density functional theory (DFT), where the cc-pVnZ basis sets are not necessarily optimal in their current form, the elucidation of the intrinsic accuracy of DFT methods cannot always be accomplished. This dissertation outlines investigations into the basis set requirements for DFT and how the intrinsic accuracy of DFT methods may be determined with a prescription involving recontraction of the cc-pVnZ basis sets for specific density functionals. Next, the development and benchmarks of a set of cc-pVnZ basis sets designed for the s-block atoms lithium, beryllium, sodium, and magnesium are presented. Computed atomic and molecular properties agree well with reliable experimental data, demonstrating the accuracy of these new s-block basis sets. In addition to the development of cc-pVnZ basis sets, the development of a new, efficient formulism of the correlation consistent Composite Approach (ccCA) using the resolution of the identity (RI) approximation is employed. The new formulism, denoted 'RI-ccCA,' has marked efficiency in terms of computational time and storage, compared with the ccCA formulism, without the introduction of …

Novel carborane (B10C2H12) and aromatic compounds (benzene, pyridine, diaminobenzene) copolymers and composite materials have been fabricated by electron beam induced cross-linking and plasma enhanced chemical vapor deposition (PECVD) respectively. Chemical and electronic structure of these materials were studied using X-ray and ultra-violet photoelectron spectroscopy (XPS and UPS). UPS suggest that the systematic tuning of electronic structure can be achieved by using different aromatic compounds as co-precursors during the deposition. Furthermore, top of valence band is composed of states from the aromatic moieties implying that states near bottom of the conduction band is derived from carborane moieties. Current- voltage (I-V) measurements on the ebeam derived B10C2HX: Diaminobenzene films suggest that these films exhibit enhanced electron hole separation life time. Enhanced electron hole separation and charge transport are critical parameters in designing better neutron voltaic devices. Recently, PECVD composite films of ortho-carborane and pyridine exhibited enhanced neutron detection efficiency even under zero bias compared to the pure ortho-carborane derived films. This enhancement is most likely due to longer electron-hole separation, better charge transport or a combination of both. The studies determining the main factors for the observed enhanced neutron detection are in progress by fabricating composite films of carborane with other aromatic …

The chemistry of transition metal clusters has been a fast developing area of organometallic research in recent years. Compared to mononuclear metal complexes, polynuclear clusters offer more opportunities to study cooperative effects and electron reservoir properties between contiguous metal centers, in addition to functioning as storehouses for the release of catalytically active small fragments capable of exhibiting heterosite subtrate activation. Theoretically, metal clusters are intermediates between mononuclear complexes and metal surfaces, i.e., they serve as a bridge between molecular and solid-state chemistry. Transition metal clusters are ideal candidates to study M-M interactions stretching from the single bond to the collective metallic behavior found in a three-dimensional network of metal atoms. The reaction between the redox-active diphoshpine ligand bpcd and RU(CO) has been examined under a variety of conditions. The disubstituted cluster Ru3(CO)10(bpcd)(2) has been synthesized and shown to contain a chealating bpcd ligand, on the basis of IR and 31P NMR data. The cluster 2 (chelating isomer) undergoes cluster fragmentation at ambient temperatures in the dark to give the binuclear compound 3 and Ru3(CO)12, with no evidence for the formation of 4. Both 3 and 4 have been isolated and fully characterized in solution by IR and NMR spectroscopy, and …

Analzying questioned documents in a nondestructive nature has been an issue for the forensic science community. Using nondestructive techniques such as video spectral comparator does not give reliable information due to the variations in gray or color levels that are distinguished differently by analysts. Destructive techniques such as chromatography give dependable, qualitative and quantitative, information but involves altering the evidentiary value of these questioned documents. The paradox of document examination becomes a problem when document evidence is involved, especially when trying to preserve its evidentiary value and critical data is needed. Thus, a nondestructive technique has been developed to solve the loopholes in document examinations. Direct analyte-probed nanoextraction (DAPNe) is a nanomanipulation technique that extracts ink directly off the document for further examination. A watermark is left, at most, post-extraction. DAPNe utilizes a tip emitter, pre-filled with a solvent, which is controlled in x-, y-, and z-coordinates via joystick controller and aspirates/extracts using a pressure injector. The versatility of this technique lies within the solvent chemistry and its capability to be coupled to various types of instrumentation. The extraction solvent can be altered to target specific components in the ink. For example, a chelator may be added to target metal …

We focused on a non-cooling room temperature microbolometer infrared imaging array device which includes a sensing layer of p-type a-Si:H component layers doped with boron. Boron incorporation and bonding configuration were investigated for a-Si:H films grown by plasma enhanced chemical deposition (PECVD) at varying substrate temperatures, hydrogen dilution of the silane precursor, and dopant to silane ratio using multiple internal reflection infrared spectroscopy (MIR-IR). This study was then confirmed from collaborators via Raman spectroscopy. MIR-IR analyses reveal an interesting counter-balance relationship between boron-doping and hydrogen-dilution growth parameters in PECVD-grown a-Si:H. Specifically, an increase in the hydrogen dilution ratio (H2/SiH4) or substrate temperature was found to increase organization of the silicon lattice in the amorphous films. It resulted in the decrease of the most stable SiH bonding configuration and thus decrease the organization of the film. The new chemical bonding information of a-Si:H thin film was correlated with the various boron doping mechanisms proposed by theoretical calculations. The study revealed the corrosion morphology progression on aluminum alloy (Al, 0.5% Cu) under acidic chloride solution. This is due to defects and a higher copper content at the grain boundary. Direct galvanic current measurement, linear sweep voltammetry (LSV), and Tafel plots are used …

The field of direct inject mass spectrometry includes a massive host of ambient ionization techniques that are especially useful for forensic analysts. Whether the sample is trace amounts of drugs or explosives or bulk amounts of synthetic drugs from a clandestine laboratory, the analysis of forensic evidence requires minimal sample preparation, evidence preservation, and high sensitivity. Direct inject mass spectrometry techniques can rarely provide all of these. Direct analyte-probed nanoextraction coupled to nanospray ionization mass spectrometry, however, is certainly capable of achieving these goals. As a multifaceted tool developed in the Verbeck laboratory, many forensic applications have since been investigated (trace drug and explosives analysis). Direct inject mass spectrometry can also be easily coupled to assays to obtain additional information about the analytes in question. By performing a parallel artificial membrane assay or a cell membrane stationary phase extraction prior to direct infusion of the sample, membrane permeability data and receptor activity data can be obtained in addition to the mass spectral data that was already being collected. This is particularly useful for characterizing illicit drugs and their analogues for a biologically relevant way to schedule new psychoactive substances.

In the oil and gas industry, high corrosion resistance and hardness are needed to extend the lifetime of the coatings due to exposure to high stress and salt environments. Electrodeposition has become a favorable technique in synthesizing coatings because of low cost, convenience, and the ability to work at low temperatures. Electrodeposition of metal matrix composites has become popular for enhanced corrosion resistance and hardness in the oil and gas industry because of the major problems that persist with corrosion. Two major alloys of copper-nickel, 90-10 and 70-30, were evaluated for microbial corrosion protection in marine environments on a stainless steel substrate. Copper and copper alloys are commonly used in marine environments to resist biofouling of materials by inhibiting microbial growth. Literature surveying the electrodeposition of Cu-Ni incorporated with nano- to micro- particles to produce metal matrix composites has been reviewed. Also, a novel flow cell design for the enhanced deposition of metal matrix composites was examined to obtain the optimal oriented structure of the layered silicates in the metal matrix. With the addition of montmorillonite into the Ni and Cu-Ni matrix, an increase in strength, adhesion, wear and fracture toughness of the coating occurs, which leads to an increase …

In the exploration of chemical systems through quantum mechanics, accurate treatment of the electron wavefunction, and the related electron density, is fundamental to extracting information concerning properties of a system. This work examines challenges in achieving accurate chemical information through manipulation of the one-electron basis set.