Solid state experiments at extreme pressures (10-100 GPa) and strain rates ({approx}10{sup 6}-10{sup 8}s{sup -1}) are being developed on high-energy laser facilities, and offer the possibility for exploring new regimes of materials science. [Re 2004] These extreme solid-state conditions can be accessed with either shock loading or with quasi-isentropic ramped pressure pulses being developed on the Omega laser. [Ed 2004] Velocity interferometer measurements establish the high strain rates. Constitutive models for solid-state strength under these conditions are tested by comparing 2D continuum simulations with experiments measuring perturbation growth due to the Rayleigh-Taylor instability in solid-state samples. Lattice compression, phase, and temperature are deduced from extended x-ray absorption fine structure (EXAFS) measurements, from which the shock-induced a-w phase transition in Ti is inferred to occur on sub-nanosecond time scales. [Ya 2004] Time resolved lattice response and phase can be inferred from dynamic x-ray diffraction measurements, where the elastic-plastic (1D-3D) lattice relaxation in shocked Cu is shown to occur promptly (< 1 ns). [Lo 2003] Subsequent large-scale MD simulations have elucidated the microscopic dynamics that underlie the 3D lattice relaxation. Deformation mechanisms are identified by examining the residual microstructure in recovered samples. [Re 2004] For example, the slip-twinning threshold in single-crystal Cu …

A gamma ray burst detector of x-ray photons 2 to 10 keV is designed to maximize area, 100 m/sup 2/, and sensitivity, 10/sup -10/ ergs cm/sup -2/ s/sup 1/2/ modest directionality, 2 x 10/sup -4/ sr, and minimize thickness, 3 mg cm/sup -2/, as a plastic space balloon ion chamber. If the log N - log S curve for gamma bursts extends as the -3/2 power, the sensitivity is limited by gamma-burst peak overlap in time so that the question of the size spectrum and isotropy is maximally tested. Supernova type I prompt x-ray bursts of congruent to 3-ms duration should be detected at a rate of several per day from supernova at a distance greater than 100 Mpc.

The performance of the new combustor was tested. Experiments showed that this combustor has superior insulating quality than the previous one. Measured radial concentrations indicated uniform distribution of the primary fuel (coal) inside the fire tube resulting in reasonably flat concentration profiles. However, measured radial concentrations after the addition of the reburn fuel showed uneven distribution of the fuel resulting in parabolic concentration profiles, an indication of insufficient mixing in the reburn zone. In order to study mechanisms of nitrogenous species destruction in the reburn zone, it is necessary to achieve adequate mixing if the assumption of one dimensional plug flow behavior is to be valid. Thus, it became necessary to modify the injector design and the injection mode of the reburn fuel to achieve an adequate level of mixing which is the focus of this report. The results show that a minimum reburn fuel jet velocity of 15 m/s (standard conditions) was required which is about 80 times the velocity of the primary effluent. The use of nitrogen gas as a transport medium for the reburn fuel was necessary to achieve the desired jet velocities.

This study covers the use of dc generators for meeting the Experimental Power Reactor Ohmic Heating Energy Storage Requirements. The dc generators satisfy these requirements which are the same as defined in WFPS-TME-038 which covered the use of ac generators and homopolar generators. The costs of the latter two systems have been revised to eliminate first-of-a-kind factors. The cost figures for dc generators indicate a need to develop larger machines in order to take advantage of the economy-of-scale that the large ac machines have. Each of the systems has its own favorable salient features on which to base a system selection.

The build-up of tritium in a liquid lithium breeding blanket for an ICF chamber has been examined. The break-even time is found to decrease both the increasing tritium breeding ratio and increasing values of ..cap alpha.., the fraction of unburned tritium absorbed in lithium. The break-even inventory also decreased with increasing breeding ratio but increases with increasing values ..cap alpha... For a molten-salt extraction process, the steady-state tritium inventory in lithium is inversely proportional to lithium flow rate through the extraction system. The lithium flow rate through the tritium extraction system required to maintain a given tritium concentration increases with increasing values of ..cap alpha...

Central features of a mirror plasma are strong departures from Maxwellian distribution functions, ambipolar potentials and densities which vary along a field line, end losses, and the mirror field itself. To examine these features, mirror theorists have developed analytical and numerical techniques to solve the Fokker-Planck equation, evaluate the potentials consistent with the resulting distribution functions, and assess the microstability of these distributions. Various combinations of mirror-plasma features are present and important in toroidal plasmas as well, particularly in the edge region and in plasmas with strong rf heating. In this paper we survey problems in toroidal plasmas where mirror theory and computational techniques are applicable, and discuss in more detail three specific examples: calculation of the toroidal generalization of the Spitzer-Haerm distribution function (from which trapped-particle effects on current drive can be calculated), evaluation of the nonuniform potential and density set up by pulsed electron-cyclotron heating, and calculation of steady-state distribution functions in the presence of strong rf heating and collisions. 37 refs.

Purpose of this document is to compare and contrast the overall burial costs of the glass and ceramic waste forms, including processing, storage, transportation, packaging, and emplacement in a repository. Amount of waste will require approximately 10,300 standard (24 in. i.d. x 9-5/6 ft length) canisters of waste glass, each containing about 3260 lb of waste at 28% waste loading. The ceramic waste form requires about one-third the above number of standard canisters. Approximately $2.5 billion is required to process and dispose of this waste, and the total cost is independent of waste form (glass or ceramic). The major cost items (about 80% of the total cost) for all cases are capital and operating expenses. The capital and 20-year operating costs for the processing facility are the same order of magnitude, and their sum ranges from about one-half of the total for the reference glass case to two-thirds of the total for the ceramic cases.

The Mark 22 assemblies previously charged to the P Reactor as the P-11 charge, but never irradiated, are stored in borated racks in Building 105-K Assembly Area. The assemblies are stored inside aluminum cans into which they are placed and subsequently dried upon removal from the P-Reactor. This report discusses non-destructive examinations supplemented by destructive examination of a small number of these assemblies made to establish the acceptability of these assemblies for use as the K-15 charge.

Much has been written about ceramic superconductors since their discovery in 1986. Most of this writing reports and describes scientific research. However, some authors have sought to put this research in context: to assess where the field stands, what might be technically feasible, what might be economically feasible, and what potential impacts ceramic superconductors will bring to the electric power sector. This report's purpose is to make the results of already published assessments readily available. To that end, this report lists and provides abstracts for various technical and economic assessments related to applications of High-Temperature Superconductors (HTS) to the electric power sector. Those studies deemed most important are identified and summarized. These assessments were identified by two means. First, members of the Executive Committee identified some reports as worthy of consideration and forwarded them to Argonne National Laboratory. Twelve assessments were selected. Each of these is listed and summarized in the following section. Second, a bibliographic search was performed on five databases: INSPEC, NTIS, COMPENDEX, Energy Science Technology, and Electric Power Database. The search consisted of first selecting all papers related to High Temperature Superconductors. Then papers related to SMES, cables, generators, motors, fault current limiters, or electric utilities were …

The subject of this review is intense ion beam propagation and the possibilities of measuring time dependent ion energy in the beam. Propagation effects discussed include charge separation, charge and current autoneutralization, electron thermalization and current neutralization decay. The interaction of a plasma beam with material obstacles, like collimators, and with transverse magnetic fields is also described. Depending on beam energy, density and pulse length, these interactions can include material ablation with plasmadynamic flow and undeflected propagation across transverse magnetic fields by a polarization drift. On the basis of this review I conclude that three diagnostics: a single floating potential probe, net current probes (Faraday cups) and a Rutherford scattering spectrometer appear capable of giving prompt, time dependent ion energy measurements.

Fragments of radioactive materials were deposited in the Redox area during August, 1953. By radiation monitoring, the location, physical properties, and dosage were determined. The cause was assumed to be the buildup of ammonium nitrate containing ruthenium on the filters of the Redox stack. The amount of occupational exposure, and the reasons why this incident happened were also discussed.

Fluor Daniel Hanford, Inc. (FDH) is currently adopting streamlined business processes through integrated software solutions. Replacing the legacy software (current/replacement systems, attached) also avoids significant maintenance required to resolve Year 2000 issues. This initiative is being referred to as `HANDI 2000`. The software being implemented in the first phase of this project includes Indus International`s PASSPORT Software, Peoplesoft and Primavera P3 Software. The project, which encompasses all the system replacements that will occur, has been named `HANDI 2000.` The PASSPORT applications being implemented are Inventory Management, Purchasing, Contract Management, Accounts Payable, and MSDS (Material Safety Data Sheets).

The intent of this study is to establish more completely the justifications for constructing a decontamination plant as outlined in Budget Item B 5720, ``Containmented Equipment Renovation Shop,`` FY 1957, Plant and Equipment Projects. In particular, the economic incentives have been explored. The question or idea has been investigated of assigning a dollar value to engineering information which might be obtained from examining contaminated equipment which has failed from unknown causes. Heretofore it has not been possible to examine such equipment because suitable decontamination facilities have not been available. An effort has been made to uncover all possible uses for the proposed facility in order that the estimated capital and operating costs might be evaluated in terms of all the functions which the proposed plant might perform.

Reactor support charge designs and patterns have been numerous and varied over the past few years, the basis for acceptance of a particular support loading being determined from a consideration of fabrication costs and the hydraulic characteristics of the proposed dummy load as it applies to a particular reactor. Since the first three or four dummy pieces downstream of the fuel column (and upstream of the column in a spline tube) are discarded after the irradiation process, it is desirable to use tubular dummies for this portion of the support charge which are less expensive to fabricate and which are easily identified during the charging-discharging process. However, there exists a remote possibility that one or more tubular pieces could be inadvertently placed in a rear nozzle resulting in a flow restriction in the process tube. These arrangements of tubular support pieces in the dummy pattern, i.e., tubulars positioned against the fuel column and/or in the process tube rear nozzles, have been hydraulically tested to determine if there is adequate and unrestricted flow at normal operating header pressures.

The objective of this irradiation is to further verify the corrosion rate of tubular-type fuel elements under conditions of high specific power and central core temperatures. This fuel will be the inner tube only of an NPR fuel assembly. As in previous tests, this inner tube rupture will be used to further substantiate the rupture detection instrumentation that is being used in the development of the NPR. Previously unirradiated fuel will be used in this test. The reactor is to operate at full power during the test. Permission is requested for charging two tubular elements The top element will have attached to it a hydraulic mechanism for opening a defect in the outer surface of the tube. The second or bottom element, will be used as a heater element to maintain loop temperature.

This engineering study looks at the solids/liquids separation unit operations after the acid dissolution of the K Basin sludge treatment. Unit operations considered were centrifugation, filtration (cartridge, cross flow, and high shear filtration) and gravity settling. The recommended unit operations for the solids/liquids separations are based upon the efficiency, complexity, and off-the-shelf availability and adaptability. The unit operations recommended were a Robatel DPC 900 centrifuge followed by a nuclearized 31WM cartridge filter. The Robatel DPC 900 has been successfully employed in the nuclear industry on a world wide scale. The 31WM cartridge filter has been employed for filtration campaigns in both the government and civilian nuclear arenas.

This engineering study evaluates the use of physical separation technologies to separate organic ion exchange resin from KE Basin sludge prior to nitric acid dissolution. This separation is necessitate to prevent nitration of the organics in the acid dissolver. The technologies under consideration are: screening, sedimentation, elutriation. The recommended approach is to first screen the Sludge and resin 300 microns then subject the 300 microns plus material to elutriation.

The surveillance photography of underground nuclear detonations at NTS was engineered by EG&G to furnish the following information on unexpected venting: (1) establish when, with respect to zero time, the venting occurred; (2) record the point or points of emission of the venting gases; (3) show the colors, if any, of the venting gases; (4) the direction of cloud travel; and (5) dimensions and volume of the cloud as a function of time. In addition, the film records provide a color documentary film including a record of gross surface motion and a record of unexpected surface phenomenon (such as in Longshot). Surveillance coverage starts at minus 5 seconds and continues to plus 30 minutes. This report describes the typical photographic program setup, films used, and film processing.

The objective of this test is to measure the emergency reactor flow through the high pressure crosstie line (HPCT) after the removal of the flow limiting orifices in the HPCT. The flow limiting orifices in the HPCT were removed on July 5, 1960, as per Design Change No. 383. The removal of the flow limiting orifice allowed increased emergency flow and brought the crosstie coolant flow more nearly into conformance with the coolant supply reliability criteria. The purpose of this test is to measure emergency flow under certain conditions so that available flow under all conditions may be more precisely determined.

None

Plasma confinement and neutral beam injection heating were investigated on the Oak Ridge Tokamak (ORMAK) plasma with improved plasma parameters due to higher injection power (to 360 kW), discharge current (to 220 kA) and toroidal field (to 26 kG). With increasing injection power up to 360 kW with otherwise constant operational parameters, the central ion temperature increased roughly linearly from 0.7 keV to 1.8 keV. The scaling of ion temperature with injection power and plasma density reasonably agrees with theoretical predictions based on neoclassical ion heat conduction and classical beam energy transport.

A membrane consisting of multiwall carbon nanotubes embedded in a silicon nitride matrix was fabricated for fluid mechanics studies on the nanometer scale. Characterization by tracer diffusion and scanning electron microscopy suggests that the membrane is free of large voids. An upper limit to the diffusive flux of D{sub 2}O of 2.4x10-{sup 8} mole/m{sup 2}-s was determined, indicating extremely slow transport. By contrast, hydrodynamic calculations of water flow across a nanotube membrane of similar specifications predict a much higher molar flux of 1.91 mole/m{sup 2}-s, suggesting that the nanotubes produced possess a 'bamboo' morphology. The carbon nanotube membranes were used to make nanoporous silicon nitride membranes, fabricated by sacrificial removal of the carbon. Nitrogen flow measurements on these structures give a membrane permeance of 4.7x10{sup -4} mole/m{sup 2}-s-Pa at a pore density of 4x10{sup 10} cm{sup -2}. Using a Knudsen diffusion model, the average pore size of this membrane is estimated to be 66 nm, which agrees well with TEM observations of the multiwall carbon nanotube outer diameter. These membranes are a robust platform for the study of confined molecular transport, with applications inseparations and chemical sensing.

LaserFest was the yearlong celebration, during 2010, of the 50th anniversary of the demonstration of the first working laser. The goals of LaserFest were: to highlight the impact of the laser in its manifold commercial, industrial and medical applications, and as a tool for ongoing scientific research; to use the laser as one example that illustrates, more generally, the route from scientific innovation to technological application; to use the laser as a vehicle for outreach, to stimulate interest among students and the public in aspects of physical science; to recognize and honor the pioneers who developed the laser and its many applications; to increase awareness among policymakers of the importance of R&D funding as evidenced by such technology as lasers. One way in which LaserFest sought to meet its goals was to encourage relevant activities at a local level all across the country -- and also abroad -- that would be identified with the larger purposes of the celebration and would carry the LaserFest name. Organizers were encouraged to record and advertise these events through a continually updated web-based calendar. Four projects were explicitly detailed in the proposals: 1) LaserFest on the Road; 2) Videos; 3) Educational material; and 4) …

Tritium containment and removal problems in a fuel-reprocessing plant are identified and conceptual process designs for reducing emissions to the environment to below 1 Ci/day are studied. The conceptual design recommended would allow an air atmosphere in the reprocessing-plant hall and would use a continuous-catalytic-oxidizer/molecular-sieve-adsorber cleanup system to maintain a 40-..mu..Ci/m/sup 3/ tritium level (5 ..mu..Ci/m/sup 3/ HTO) against 180 Ci/day leakage from components and process piping.