The Lawrence Berkeley National Laboratory has developed a device that measures the water content of wood chips, pulp and brown stock for the paper industry. This device employs a permanent magnet as the central part of a NMR measurement system. This report describes the magnet and the NMR measurement system. The results of water content measurements in wood chips in a magnetic field of 0.47 T are presented.

RSP Tooling{trademark} is a spray forming technology tailored for producing molds and dies. The approach combines rapid solidification processing and net-shape materials processing in a single step. The general concept involves converting a mold design described by a CAD file to a tooling master using a suitable rapid prototyping (RP) technology such as stereolithography. A pattern transfer is made to a castable ceramic, typically alumina or fused silica (Figure 1). This is followed by spray forming a thick deposit of a tooling alloy on the pattern to capture the desired shape, surface texture, and detail. The resultant metal block is cooled to room temperature and separated from the pattern. The deposit's exterior walls are machined square, allowing it to be used as an insert in a standard mold base. The overall turnaround time for tooling is about 3 to 5 days, starting with a master. Molds and dies produced in this way have been used in high volume production runs in plastic injection molding and die casting. A Cooperative Research and Development Agreement (CRADA) between the Idaho National Engineering and Environmental Laboratory (INEEL) and Grupo Vitro has been established to evaluate the feasibility of using RSP Tooling technology for producing …

Adaptive management consists in patterning human sustenancewithin the constraints of Earth and biological systems whose behavior isinherently uncertain and difficult to control. For successful adaptivemanagement, a mind-set recognizing the limitations of science isneeded.

First-order reliability methodology (FORM) is used to develop reliability-based design factors for deterministic analyses of stress corrosion cracking. The basic elements of FORM as applied to structural reliability problems are reviewed and then employed specifically to stress corrosion cracking evaluations. Failure due to stress corrosion cracking is defined as crack initiation followed by crack growth to a critical depth. The stress corrosion cracking process is thus represented in terms of a crack initiation time model and a crack growth rate model, with the crack growth rate integrated from the initiation time to the time at which the crack grows to its critical depth. Both models are described by log-normal statistical distribution functions. A procedure is developed to evaluate design factors that are applied to the mean values of the crack initiation time and the crack growth rate for specified temperature and stress conditions. The design factors, which depend on the standard deviations of the statistical distributions, are related to a target reliability, which is inversely related to an acceptable probability of failure. The design factors are not fixed, but are evaluated on a case-to-case basis for each application. The use of these design factors in a deterministic analysis assures that …

The purpose of this calculation report is to document the thermohydrologic (TH) model calculations performed for the Supplemental Science and Performance Analysis (SSPA), Volume 1, Section 5 and Volume 2 (BSC 2001d [DIRS 155950], BSC 2001e [DIRS 154659]). The calculations are documented here in accordance with AP-3.12Q REV0 ICN4 [DIRS 154418]. The Technical Working Plan (Twp) for this document is TWP-NGRM-MD-000015 Real. These TH calculations were primarily conducted using three model types: (1) the Multiscale Thermohydrologic (MSTH) model, (2) the line-averaged-heat-source, drift-scale thermohydrologic (LDTH) model, and (3) the discrete-heat-source, drift-scale thermal (DDT) model. These TH-model calculations were conducted to improve the implementation of the scientific conceptual model, quantify previously unquantified uncertainties, and evaluate how a lower-temperature operating mode (LTOM) would affect the in-drift TH environment. Simulations for the higher-temperature operating mode (HTOM), which is similar to the base case analyzed for the Total System Performance Assessment for the Site Recommendation (TSPA-SR) (CRWMS M&O 2000j [DIRS 153246]), were also conducted for comparison with the LTOM. This Calculation Report describes (1) the improvements to the MSTH model that were implemented to reduce model uncertainty and to facilitate model validation, and (2) the sensitivity analyses conducted to better understand the influence of parameter …

This is the final report for the LDRD strategic initiative entitled ''Dislocation Dynamic: Simulation of Plastic Flow of bcc Metals'' (tracking code: 00-SI-011). This report is comprised of 6 individual sections. The first is an executive summary of the project and describes the overall project goal, which is to establish an experimentally validated 3D dislocation dynamics simulation. This first section also gives some information of LLNL's multi-scale modeling efforts associated with the plasticity of bcc metals, and the role of this LDRD project in the multiscale modeling program. The last five sections of this report are journal articles that were produced during the course of the FY-2000 efforts.

The large strain deformation response of 6061-T6 and Ti-6Al-4V has been evaluated over a range in strain rates from 10{sup -4} s{sup -1} to over 10{sup 4} s{sup -1}. The results have been used to critically evaluate the strength and damage components of the Johnson-Cook (JC) material model. A new model that addresses the shortcomings of the JC model was then developed and evaluated. The model is derived from the rate equations that represent deformation mechanisms active during moderate and high rate loading. Another model that accounts for the influence of void formation on yield and flow behavior of a ductile metal (the Gurson model) was also evaluated. The characteristics and predictive capabilities of these models are reviewed.

Minimally invasive surgery (MIS) is an approach whereby procedures conventionally performed with large and potentially traumatic incisions are replaced by several tiny incisions through which specialized instruments are inserted. Early MIS, often called laparoscopic surgery, used video cameras and laparoscopes to visualize and control the medical devices, which were typically cutting or stapling tools. More recently, catheter-based procedures have become a fast growing sector of all surgeries. In these procedures, small incisions are made into one of the main arteries (e.g. femoral artery in the thigh), and a long thin hollow tube is inserted and positioned near the target area. The key advantage of this technique is that recovery time can be reduced from months to a matter of days. In the United States, over 700,000 catheter procedures are performed annually representing a market of over $350 million. Further growth in this area will require significant improvements in the current catheter technology. In order to effectively navigate a catheter through the tortuous vessels of the body, two capabilities must exist: imaging and positioning. In most cases, catheter procedures rely on radiography for visualization and manual manipulation for positioning of the device. Radiography provides two-dimensional, global images of the vasculature and …

The United States has signed but not ratified the US/IAEA Safeguards Additional Protocol. If ratified, the Additional Protocol will require the US to report to the IAEA certain nuclear-related exports and imports to the IAEA. This document identifies and assesses the issues associated with the US making those reports. For example, some regulatory changes appear to be necessary. The document also attempts to predict the impact on the DOE Complex by assessing the historical flow of exports and imports that would be reportable if the Additional Protocol were in force.

Experiments have been on-going for about two years to determine the effects that radiation damage have on the physical and chemical properties of candidate titanate ceramics for the immobilization of plutonium. We summarize the results of these experiments in this document.

The licensing of spent fuel storage casks is generally based on conservative analyses that assume a storage system being uniformly loaded with design basis fuel. The design basis fuel typically assumes a maximum assembly enrichment, maximum burn up, and minimum cooling time. These conditions set the maximum decay heat loads and radioactive source terms for the design. Recognizing that reactor spent fuel pools hold spent fuel with an array of initial enrichments, burners, and cooling times, this study was performed to evaluate the effect of load pattern on peak cladding temperature and cask surface dose rate. Based on the analysis, the authors concluded that load patterns could be used to reduce peak cladding temperatures in a cask without adversely impacting the surface dose rates.

This report is fourth in a series of annual reports describing the results of biomonitoring following remediation of the United Heckathorn Superfund Site.

The Bonneville Project is one of four US Army Corps of Engineers operated dams along the Lower Columbia River. Each year thousands of smelt pass through this Project on their way to the Pacific Ocean. High flow outfalls, if specifically designed for fish passage, are thought to have as good or better smelt survival rates as spillways. To better understand the hydrodynamic flow field around an operating outfall, the Corps of Engineers commissioned measurement of water velocities in the tailrace of the Second Powerhouse. These data also are necessary for proper calibration and verification of three-dimensional numerical models currently under development at PNNL. Hydrodynamic characterization of the tailrace with and without the outfall operating was accomplished through use of a surface drogue and acoustic Doppler current profiler (ADCP). Both the ADCP and drogue were linked to a GPS (global positioning system); locating the data in both space and time. Measurements focused on the area nearest to the high flow outfall, however several ADCP transects and drogue releases were performed away from the outfall to document ambient flow field conditions when the outfall was not operating.

None

Fluctuations in the multiplicities and momentum distributions of particles emitted in relativistic heavy-ion collisions have been widely considered as probes of thermalization and the statistical nature of particle production in such reactions. The characteristic behavior of temperature and pion multiplicity fluctuations in the final state has been proposed as a tool for the measurement of the specific heat and, specifically, for the detection of a critical point in the nuclear matter phase diagram.

This Determination of Importance Evaluation (DIE) applies to the Subsurface Exploratory Studies Facility (ESF), encompassing the Topopah Spring (TS) Loop from Station 0+00 meters (m) at the North Portal to breakthrough at the South Portal (approximately 78+77 m), and ancillary test and operation support areas including the Enhanced Characterization of the Repository Block (ECRB) Cross Drift. This evaluation applies specifically to site characterization testing activities ongoing and planned in the Subsurface ESF. ESF site characterization activities are being performed to obtain the information necessary to determine whether the Yucca Mountain Site is suitable as a geologic repository for spent nuclear fuel and high-level radioactive waste. A more detailed description of these testing activities is provided in Section 6 of this DIE. Generally, the construction and operation of excavations associated with these testing activities are evaluated in the DIE for the Subsurface ESF (CRWMS M&O 1999a) and the DIE for the ESF ECRB Cross Drift (CRWMS M&O 2000a). The scope of this DIE also entails the proposed Unsaturated Zone (UZ) Transport Test at Busted Butte. Although, not a part of the TS Loop or ECRB Cross Drift, the associated testing activities are Subsurface testing activities. Busted Butte is located to the …

This report presents the results of the fiscal year 2001 core sampling effort conducted to support the Vadose Zone Transport Field Study.

ARF1 was calibrated and checked on 4/18/01. The technique used was to set the start/stop timers (A:R1LLT1 and A:R1LLT2) for duration of 200 msec. Driving the cavities for longer than 200 msec at full voltage could put some stress on the Hipotronics anode supply. The Camac curve generator card was substituted with a precision DC voltage source. Data for both amplitude and frequency were taken with the DC source. A HP 8563A spectrum analyzer in zero span with resolution bandwidth of 1 MHz at a center frequency of 52.818 MHz was used to take the amplitude data. The dynamic curve was a triangle waveform provided by a triggered HP3213A function generator. Frequency was measured on the Fluke frequency counter mounted in the rack in AP50 (with the high level RF off). The attached data and graph contain the current calibration. ARF1-1 is slightly lower voltage than ARF1-2, but well within spec. The calibration was made with the Anode supply at 9 Kvolts, the bend busses were off due to an access that was in progress. Due to the unregulated Anode supply, the voltage levels observed may be slightly higher than with bend busses on. The dynamic performance with the triangle …

The objective and scope of this calculation is to assist Performance Assessment Operations and the Engineered Barrier System (EBS) Department in modeling the geochemical effects of evaporation on potential seepage waters within a potential repository drift. This work is developed and documented using procedure AP-3.12Q, ''Calculations'', in support of ''Technical Work Plan For Engineered Barrier System Department Modeling and Testing FY 02 Work Activities'' (BSC 2001a). The specific objective of this calculation is to examine the sensitivity and uncertainties of the Precipitates/Salts model. The Precipitates/Salts model is documented in an Analysis/Model Report (AMR), ''In-Drift Precipitates/Salts Analysis'' (BSC 2001b). The calculation in the current document examines the effects of starting water composition, mineral suppressions, and the fugacity of carbon dioxide (CO{sub 2}) on the chemical evolution of water in the drift.

We report on the lattice design of the Next Linear Collider (NLC) damping rings. The damping rings are required to provide low emittance electron and positron bunch trains to the NLC linacs, at a rate of 120 Hz. We present an optical design, based on a theoretical minimum emittance (TME) lattice, to produce the required normalized extracted beam emittances gex = 3 mm-mrad and gey = 0.02 mm mrad. An assessment of dynamic aperture and non-linear effects is given. The positron pre-damping ring, required to reduce the emittance of the positron beam such that it may be accepted by a main damping ring, is also described.

Our research efforts over the last few years have focused on the development of strategies for the quantitative application of DFWM and PS in flame environments. We have developed, validated, and applied a theoretical methodology based on direct numerical integration (DNI) of the time-dependent density matrix equations for analysis of the physics of the DFWM and PS processes. The incorporation of the Zeeman state structure of the energy levels of the radiative transitions has allowed us to investigate the physics of the PS process and polarization effects in DFWM. Our research effort has focused mainly on the moderate saturation regime, with laser pulse lengths significantly greater than characteristic collisional times, and with the assumption of monochromatic lasers. Recently, we have completed a study of multi-axial-mode laser effects of homogeneously broadened PS.

A new type of p-channel CCD constructed on high-resistivity n-type silicon was exposed to 12 MeV protons at doses up to 1x1011 protons/cm2. The charge transfer efficiency was measured as a function of radiation dose and temperature. We previously reported that these CCDs are significantly more tolerant to radiation damage than conventional n-channel devices. In the work reported here, we used pocket pumping techniques and charge transfer efficiency measurements to determine the identity and concentrations of radiation induced traps present in the damaged devices.

The effect of substrate misorientation on phase separation in Ga{sub 1-x}In{sub x}As{sub y}Sb{sub 1-y} nominally lattice-matched to GaSb is reported. The layers were grown at 575 C by organometallic vapor phase epitaxy on vicinal (001) GaSb substrates, miscut 2{sup o} {yields} (-111)A, (1-11)B, or (101). Ga{sub 1-x}In{sub x}As{sub y}Sb{sub 1-y} (x {approx} 0.1, y {approx} 0.09) layers, which have 300-K photoluminescence (PL) peak emission at {approx}2.1 {micro}m, grow step-bunched and exhibit minimal phase separation. The full width at half maximum of 4-K PL spectra is slightly smaller at 7 meV for layers grown on substrates miscut toward (1-11)B compared to 9 meV for layers grown on substrates miscut toward (-1-11)A and (101). Ga{sub 1-x}In{sub x}As{sub y}Sb{sub 1-y} layers with higher alloy composition (0.16 {le} x {le} 0.19, 0.14 {ge} y {le} 0.17), which have 300-K PL peak emission at {approx}2.4 {micro}m, have significant phase separation. These layers are characterized by increased lattice constant variations and epitaxial tilt, broad PL spectra with significant band tailing, and strong contrast modulation in transmission electron microscopy. The degree of decomposition depends on substrate miscut direction: Ga{sub 1-x}In{sub x}As{sub y}Sb{sub 1-y} layers grown on (001) 2{sup o} {yields} (1-11)B substrates are more homogeneous than those …

This Analysis/Model Report (AMR), ''Characterize Eruptive Processes at Yucca Mountain, Nevada'', presents information about natural volcanic systems and the parameters that can be used to model their behavior. This information is used to develop parameter-value distributions appropriate for analysis of the consequences of volcanic eruptions through a potential repository at Yucca Mountain. Many aspects of this work are aimed at resolution of the Igneous Activity Key Technical Issue (KTI) as identified by the Nuclear Regulatory Commission (NRC 1998, p. 3), Subissues 1 and 2, which address the probability and consequence of igneous activity at the proposed repository site, respectively. Within the framework of the Disruptive Events Process Model Report (PMR), this AMR provides information for the calculations in two other AMRs ; parameters described herein are directly used in calculations in these reports and will be used in Total System Performance Assessment (TSPA). Compilation of this AMR was conducted as defined in the Development Plan, except as noted. The report begins with considerations of the geometry of volcanic feeder systems, which are of primary importance in predicting how much of a potential repository would be affected by an eruption. This discussion is followed by one of the physical and chemical …