Terminological requirements in information management was but one of the principal themes of the 2nd Congress on Terminology and Knowledge Engineering. The traveler represented the American Society for Testing and Materials' Committee on Terminology, of which he is the Chair. The traveler's invited workshop emphasized terminology standardization requirements in databases of material properties as well as practical terminology standardizing methods. The congress included six workshops in addition to approximately 82 lectures and papers from terminologists, artificial intelligence practitioners, and subject specialists from 18 countries. There were approximately 292 registrants from 33 countries who participated in the congress. The congress topics were broad. Examples were the increasing use of International Standards Organization (ISO) Standards in legislated systems such as the USSR Automated Data Bank of Standardized Terminology, the enhanced Physics Training Program based on terminology standardization in Physics in the Chinese province of Inner Mongolia, and the technical concept dictionary being developed at the Japan Electronic Dictionary Research Institute, which is considered to be the key to advanced artificial intelligence applications. The more usual roles of terminology work in the areas of machine translation. indexing protocols, knowledge theory, and data transfer in several subject specialties were also addressed, along with numerous …

Tantalum experiences severe intergranular attack (IGA) when in contact with molten plutonium. This IGA of tantalum has produced part failures in crucibles used during Trident and molten salt extraction (MSE) runs and in two stirring rods used in MSE runs. These parts were used at temperatures ranging from 750{degrees}C to 900{degrees}C for a minimum time of 12 hours to a maximum time of 20 hours. 5 refs., 22 figs.

This report discusses the following topics: US Nuclear Data Network Meeting; TUNL A=3--20 Data Project Activity Report 1993; INEL Mass-chain Evaluation Project Activity Report for 1993; 1993 Isotopes; Nuclear Data Project Activity Report; The NNDC Activity Report Parts A and B; Minutes of the Formats and Procedures Subcommittee; Evaluation of High-spin Nuclear Data for ENSDF and Table of Superdeformed Nuclear Bands; Proposal for Support of a Experimental High-spin; Data File/Data-Network Coordinator; Radioactive Decay and Applications; A Plan for a Horizontal Evaluation of Decay Data; ENSDF On-line System; The MacNuclide Project Expanding the Scope of the Nuclear Structure Reference File; ENSDAT: Evaluated Nuclear Structure Drawings and Tables; Cross Section Evaluation Working Group (CSEWG) and CSEWG Strategy Session; A Draft Proposal for a USNDN Program Advisory Council; Recommendations of Focus Group 1; Recommendations of Focus Group 2; Recommendations of Focus Group 3; Recommendations of Focus Group 4; The Table of Isotopes; The Isotopes CD-ROM; Electronic Table of Isotopes (ETOI); and Electronic Access to Nuclear Data.

This study identifies possible flammable gas monitoring and ventilation system alternatives to ensure adequate removal of flammable gases from the Double-Contained Receiver Tank (DCRT) primary tanks during temporary storage of small amounts of waste. The study evaluates and compares these alternatives to support closure of the Flammable Gas Unreviewed Safety Question (USQ TF-96-04330).

We have begun building the ''Mercury'' laser system as the first in a series of new generation diode-pumped solid-state lasers for inertial fusion research. Mercury will integrate three key technologies: diodes, crystals, and gas cooling, within a unique laser architecture that is scalable to kilojoule energy levels for fusion energy applications. The primary performance goals include 10% electrical efficiencies at 10 Hz and 100 J with a 2-10 ns pulse length at 1.047 pm wavelength. When completed, Mercury will allow rep-rated target experiments with multiple target chambers for high energy density physics research.

This paper describes a work in progress on using multiple sets of input features for robust real-time object tracking in image sequences. Traditional approaches to tracking relied mostly on segmentation of the intensity data using motion or appearance data. Recent availability of real-time range data allows us to use it as an additional unrivaled source of information. We propose a combination of intensity- and range-based input features. Range data enables localized search for' specific features which improves tracking reliability and speed. Proposed approach was successfully tested for the face and gesture tracking application.

An experimental modal analysis was performed on PATHFINDER, a 450-lb, 100-ft wing span, flying-wing-design aircraft powered by solar/electric motors. The aircraft was softly suspended and then excited using random input from a long-stroke shaker. Modal data was taken from 92 measurement locations on the aircraft using newly designed, lightweight, tri-axial accelerometers. A conventional PC-based data acquisition system provided data handling. Modal parameters were calculated, and animated mode shapes were produced using SMS STARStruct{trademark} Modal Analysis System software. The modal parameters will be used for validation of finite element models, optimum placement of onboard accelerometers during flight testing, and vibration isolation design of sensor platforms.

The growth of Cu Layers deposited on Ru(0001) substrates at temperatures between 500 K and 850 K was studied using surface x-ray diffraction. Results are consistent with a Stransky-Krastanov growth mode with a two layer critical thickness.

The U.S. Department of Energy (DOE) launched the Contract Reform Initiative in 1994 in order to improve the effectiveness and effkiency of managing major projects and programs. The intent of this initiative is to help DOE harness both technical and market forces to reduce the overall cost of accomplishing DOE's program goals. The new approach transfers greater risk to private contractors in order to develop incentives that align contractor performance with DOE's objectives. In some cases, this goal can be achieved through public-private partnerships wherein the govermhent and the contractor share risks associated with a project in a way that optimizes its economics. Generally, this requires that project risks are allocated to the party best equipped to manage and/or underwrite them. While the merits of privatization are well documented, the question of how privatized services should be financed is often debated. Given the cost of private sector equity and debt, it is difficult to ignore the lure of the government's "risk free" cost of capital. However, the source of financing for a project is an integral part of its overall risk allocation, and therefore, participation by the government as a financing source could alter the allocation of risks in the …

Phonon drag on dislocations is the dominant process which determines the flow stress of metals at elevated temperatures and at very high plastic deformation rates. The dependence of the phonon drag on pressure or density is derived using a Mie-Grueneisen equation of state. The phonon drag is shown to increase nearly linearly with temperature but to decrease with density or pressure. Numerical results are presented for its variation for shock-loaded copper and aluminum. In these cases, density and temperature increase simultaneously, resulting in a more modest net increase in the dislocation drag coefficient. Nevertheless, phonon drag increases by more than an order of magnitude during shock deformations which approach melting. Since the dependencies of elastic moduli and of the phonon drag coefficient on pressure and temperature are fundamentally different, the effect of pressure on the constitutive law for plastic deformation can not simply be accounted for by its effect on the elastic shear modulus.

Normal form analysis and tracking results show that both normal and skew resonances are driven strongly by the nonlinear fields of the IR quadrupoles. We report here on the possibility of improving the dynamic aperture by compensating these resonances with the use of correctors placed in the IRs. The effectiveness of local correction schemes in the presence of beam-beam interactions is also studied.

Silicon Vertex tracks are of fundamental importance for reconstructing B meson decays at a hadron collider. The upgraded CDF detector will deploy an online Silicon Vertex Tracker in the level 2 trigger. We have studied how this new device exploits the Tevatron large B meson production to select hadronic B decays fundamental for measuring CP violation and B{sub s} mixing.

Grain growth experiments and simulations exhibit self-similar grain size distributions quite different from that derived via a mean field approach by Hillert [ 1]. To test whether this discrepancy is due to insufficient anneal times, two different two-dimensional grain structures with realistic topologies and Hillert grain size distributions are generated and subjected to grain growth via the Monte Carlo Potts Model (MCPM). In both cases, the observed self-similar grain size distributions deviate from the initial Hillert form and conform instead to that observed in MCPM grain growth simulations that start from a random microstructure. This suggests that the Hillert grain size distribution is not an attractor.

Uranium alloys are candidates for the fuel phase in aluminum matrix dispersion fuels requiring high uranium loading. Certain uranium alloys have been shown to have good irradiation performance at intermediate burnup. Previous studies have shown that acceptable fission gas swelling behavior and fuel-aluminum interaction is possible only if the fuel alloy can be maintained in the high temperature body-centered-cubic {gamma}-phase during fabrication and irradiation, i.e., at temperatures at which {alpha}-U is the equilibrium phase. Transition metals in Groups V through VIII are known to allow metastable retention of the gamma phase below the equilibrium isotherm. These metals have varying degrees of effectiveness in stabilizing the gamma phase. Certain alloys are metastable for very long times at the relatively low fuel temperatures seen in research reactor operation. In this paper, the existing data on the gamma stability of binary and ternary uranium alloys is analyzed. The mechanism and kinetics of decomposition of the gamma phase are assessed with the help of metal alloy theory. Alloys with the highest possible uranium content, good gamma-phase stability, and good neutronic performance are identified for further metallurgical studies and irradiation tests. Results from theory will be compared with experimentally generated data.

This paper describes the progress achieved by the Reduced Enrichment for Research and Test Reactors (RERTR) Program in collaboration with its many international partners since its inception in 1978. A brief summary of the results that the program had attained by the end of 1997 is followed by a detailed review of the major events, findings, and activities that took place in 1998. The past year was characterized by exceptionally important accomplishments and events for the RERTR program. Four additional shipments of spent fuel from foreign research reactors were accepted by the U.S. Altogether, 2,231 spent fuel assemblies from foreign research reactors have been received by the U.S. under the acceptance policy. Fuel development activities began to yield solid results. Irradiations of the first two batches of microplates were completed. Preliminary postirradiation examinations of these microplates indicate excellent irradiation behavior of some of the fuel materials that were tested. These materials hold the promise of achieving the pro am goal of developing LEU research reactor fuels with uranium density in the 8-9 g /cm{sup 3} range. Progress was made in the Russian RERTR program, which aims to develop and demonstrate the technical means needed to convert Russian-supplied research reactors to …

Treatment of [Fe(OEP)]20 with trichloroacetic acid results in ruffled formation of (octaethylporphinato trichloroacetato)iron(HI). Various crystalline solvates can be isolated, depending on the crystallization solvent. Initial crystallization with CHC13/hexanes resulted in the isolation of an unsolvated form. [Fe(OEP)(02C2C13 )]. This form contains distinct porphyrin core conformations at the same site: one is domed and the other is ruffled. Crystal data for [Fe(OEP)(02C2C13 )]: Q = 14.734(4) .4. b = 13.674(1) .\. c = 17..541 [,.5] .~. 3 = 90.67(1)0, V = 35-!5.8(14) .\3. monoclinic. space group R1/ n. Z = 4. Subsequent crystallization with CHC13/hexanes resulted in a new crystalline form, [Fe(OEP)(OzC2C13 )~.- CHC13; the porphyrin core is slightly ruffled. Crystal data for [Fe(OEP)(OoC2C13 )]. CHC13: a =12.323(1) .~, 6 = 13.062(3) .\. C = 14.327(2) .$, Q = 89.32(1)", .3 = 113.36(2)0. :~ = 105.26(1)'. V = `2031.3(6) .\3. triclinic. space group Pi. Z = 2. Crystallization with CH2C12/hexanes resulted in the isolation of yet another form, [Fe(OEP) (02 C2C13)]. H02C2C13. which contains two independent molecules in the unit cell: molecule is slightly saddled and molecule B is modestly ruffled. Crystal data for [Fe(OEP)(02ClC13 )]. H02C2C13: a = 13.148(3) .\, b = 13.45.5(3) A, c = Q3.761(5) -& ~ = …

Control of criticality in spent nuclear fuel is necessary during all phases of fuel management during storage, transportation, and permanent disposal. Work completed to date is described. Tasks in the original proposal include: seek coverage by an approved quality control program, review documents related to criticality, attend criticality meetings and workshops, and maintain an expertise in criticality. Current work is covered by Univ. of Nevada QA plan, however, coverage under a more thorough plan will be sought in order that the results can be used during NRC licensing.

The Electric Power Monthly (EPM) presents monthly electricity statistics for a wide audience including Congress, Federal and State agencies, the electric utility industry, and the general public. The purpose of this publication is to provide energy decisionmakers with accurate and timely information that may be used in forming various perspectives on electric issues that lie ahead. The Coal and Electric Data and Renewables Division; Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), Department of Energy prepares the EPM. This publication provides monthly statistics at the State, Census division, and US levels for net generation, fossil fuel consumption and stocks, quantity and quality of fossil fuels, cost of fossil fuels, electricity sales, revenue, and average revenue per kilowatthour of electricity sold. Data on net generation, fuel consumption, fuel stocks, quantity and cost of fossil fuels are also displayed for the North American Electric Reliability Council (NERC) regions. The EIA publishes statistics in the EPM on net generation by energy source; consumption, stocks, quantity, quality, and cost of fossil fuels; and capability of new generating units by company and plant.

The traveler spent the year at CERN primarily to test, calibrate, and prepare a BGO photon detector system for use in the August 1990 run of WA80 with sulfur beams and for use in future planned runs with an expanded BGO detector. The BGO was used in test-beam runs in December 1989 and April--May 1990 and in the August data-taking run. The Midrapidity Calorimeters (MIRAC) were also prepared in a new geometry for the August run with a new transverse energy trigger. The traveler also continued to refine and carry out simulations of photon detector systems in present and future planned photon detection experiments. The traveler participated in several WA80 collaboration meetings, which were held at CERN throughout the period of stay. Invited talks were presented at the Workshop on High Resolution Electromagnetic Calorimetry in Stockholm, Sweden, November 9--11, 1989, and at the International Workshop on Software Engineering, Artificial Intelligence, and Expert Systems for High-Energy and Nuclear Physics at Lyon, France, March 19--24, 1990. The traveler participated in an experiment to measure particle--particle correlations at 30-MeV/nucleon incident energies at the SARA facility in Grenoble from November 11--24, 1989.

Efforts were concentrated on numerically modeling the time-dependent particle coarsening (Ostwald ripening) process. Four models were included: Lifshsitz-Slyozov-Wagner, Brailsford and Wynblatt, Marqusee and Ross, and Marder. The simulations monitored the particle size distribution (PSD) as a function of time; initial PSDs were derived from classical nucleation theory. The ripening kinetics can be represented as a plot of the second moment of normalized PSD vs time. A geometric correction factor is discussed. Future research is planned on Al-Li.

Recently, Late Washing (LW) and Nitric Acid (NA) flowsheets, developed respectively for the DWPF at Savannah River Technology Center SPC and CPC, were demonstrated in the one-fifth scale DWPF pilot facilities, PHEF and IDMS. Using the LW flowsheet, four runs in the PHEF produced enough PHA for two runs in the IDMS (denoted by PX4 and PX5). One of the objectives of these IDMS runs was to obtain peak hydrogen generation rates and compare them to the peak hydrogen generation rate design basis obtained from a previous IDMS run, based on the HAN and Formic Acid (HAN-FA) flowsheets.

Efforts were concentrated on numerically modeling the time-dependent particle coarsening (Ostwald ripening) process. Four models were included: Lifshsitz-Slyozov-Wagner, Brailsford and Wynblatt, Marqusee and Ross, and Marder. The simulations monitored the particle size distribution (PSD) as a function of time; initial PSDs were derived from classical nucleation theory. The ripening kinetics can be represented as a plot of the second moment of normalized PSD vs time. A geometric correction factor is discussed. Future research is planned on Al-Li.

This document provides the structural analysis (static and thermal loads) of the 241SY101 tank to determine the maximum allowable temperature and rate of heating that could be applied to tank 241SY101 through annulus air heating without detrimental effects to the structural integrity of the concrete and steel liner of the tank.

None