Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Price Daniel, regarding a legal question submitted for clarification: Legality under nepotism statutes of continuing county employment of a brother of a newly elected County Commissioner under submitted facts.

The purpose of the research work reported in this volume is the development of a process for the separation and subsequent purification of radium from the K-65 (pitchblende) residue. Except for the accumulation of additional experimental data the process is essentially complete. After a preliminary extraction of about 85% of the lead and 40% of the silica with a 40% sodium hydroxide solution, the residue is treated with a solution containing both sodium hydroxide and sodium carbonate to obtain additional lead removal and partial conversion of the radium and barium sulfates to carbonates. After leaching out the soluble carbonates, the residue containing unconverted sulfates is treated with a sodium carbonate solution at 170{sup o} under pressure. A study of the amount and concentration of sodium carbonate required to obtain a satisfactory conversion of the sulfates has shown that the total sodium carbonate may be reduced by 40% and that smaller volumes of solution may be employed without serious decrease in the efficiency of the conversion. In order to make calculations on the number of steps and tank sizes for the radium-barium separation by fractional precipitation, equations have been developed to calculate this information from the theoretical separation factors determined experimentally. …

The purpose of the research work presented in this volume is to develop a process for the separation and purification of actinium-227 produced by neutron bombardment of radium-226 and to develop methods by which uniform films of actinium metal may be deposited on metallic surfaces. The design work on the cave structure and mechanical equipment used in the actinium separation is proceeding on schedule. As the mechanical design phase is nearing completion the emphasis is being directed toward processing equipment. The process as well as the mechanical equipment has been adapted from the research work of F. T. Hagemann and the Remote Control Group at Argonne National Laboratory. Consequently, one of the first objectives is to become familiary with the chemistry of the process and the operation of the mechanical equipment. Cold runs have been made on the T.T.A. benzene extraction using lanthanum and barium in place of actinium and radium. No difficulty with the operation was observed. The formation of precipitates was one of the difficulties encountered with the process as the precipitates carry radium. It has been found that metals such as nickel cause these precipitates to form and should, therefore, be avoided in the construction of equipment. …

None

Report presenting an investigation of the hydrodynamic characteristics of a model of a 130,000-pound transonic flying-boat design with a high length-beam ratio planing-tail hull, sweptback gull wings with wing-tip floats, and wing-root jet-power-plant installation. Results regarding the aerodynamic, hydrostatic, and hydrodynamic qualities are provided.

An investigation has been conducted in the Langley 4- by 4-foot supersonic tunnel at Mach numbers 1.40 and 1.59 to determine the effect of aileron profile on the aerodynamic characteristics of a complete model of a supersonic aircraft configuration. The model had a 40 degree sweptback tapered wing with 10-percent-thick circular-arc sections normal to the quarter-chord line. The ailerons were 20-percent chord and were located on the outboard 50 percent of the wing semispans. The various ailerons investigated included the basic circular-arc profile and three flat-sided ailerons having ratios of trailing-edge thickness to hinge-line thickness t of 0, 0.5, and 1.0. Low aileron effectiveness was obtained with the circular-arc and t = 0 profiles. Increasing the trailing-edge thickness (t = 0.5 and 1.0) resulted in increased effectiveness as well as increased hinge moments with only a slight increase in drag.

This report addresses the corrosion of zirconium in 600°F water and in 750°F superheated steam.

A report describing a the results of a fluorimetric and volumetric method for the determination of fluoride. This method was developed for the determination of ionizable fluorine in gases in the range of 1-500ppm. This method was chosen because the determination depends on the generation of a color rather than the bleaching effect or on a change of color.

A report of research work intended for the development of a process for the separation and subsequent purification of radium from the K-65 (pitchblende) residue.

A search for gamma-ray activities with period 1-100 msec from thermal neutron fission of U235 gave negative results. 0.43 +- 0.03 sec was the shortest observed. The period of B12 was found to be 27 +- 3 msec. The cyclotron beam was pulsed to supply 1-10 msec neutron bursts. coincidence scintillation deters were employed.

Investigation of principles of pulse-column design and effects of operating variables.

Graphic pamphlet about Dick Wingate and his experiences in the U.S. Navy, with enlistment and pay information at the beginning and end of the document.