Correspondence issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO provided information on the carry over balances in the Department of Commerce's Advanced Technology Program (ATP), focusing on: (1) balances in the program for fiscal years 1995 through 1999; and (2) any balances that might exist at the end of fiscal year (FY) 2000 that could be used as offsets for the National Institute of Standards and Technology (NIST) programs in the FY 2001 budget."

A letter report issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO reviewed the Baca Ranch owner's appraisal, the Forest Service's appraisal review report, and the Forest Service's market study."

A statement of record issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO discussed the Chemical Safety and Hazard Investigation Board's organizational changes, determining the status of the Board's: (1) organization; (2) operations; and (3) efforts to update and develop plans, policies, and procedures for accomplishing the Board's mission."

A letter report issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO reviewed the Army Corps of Engineers' financing of navigation projects at small and medium-sized public ports, focusing on: (1) how small and medium-sized public ports financed the nonfederal share of the cost of navigation projects from 1986 through 1999; (2) the extent to which projects have been terminated or suspended at small and medium-sized public ports during this period because the ports were unable to demonstrate a feasible source of funding for the nonfederal share; and (3) whether federally sponsored innovative financing mechanisms could help small and medium-sized public ports fund the nonfederal share of navigation projects."

Testimony issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO discussed its views on the Department of Energy's (DOE) Implementation Plan for the newly created National Nuclear Security Administration (NNSA)."

Testimony issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO discussed S. 1993, the Government Information Security Act of 1999 and its impact on strengthening the information security practices throughout the federal government, focusing on: (1) potential improvements in federal agency performance in addressing computer security issues; (2) the need for better-defined control standards; and (3) centralized leadership."

Testimony issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO discussed the efforts being undertaken by the Department of Transportation's (DOT) newly established Federal Motor Carrier Safety Administration to reduce the number of large truck-related fatalities."

The purpose of this design analysis and calculation is to determine the demand for domestic cold water and to size the supply main piping for the Change House Facility No.5008 in accordance with the Uniform Plumbing Code (Section 4.4.1) and US Department of Energy Order 6430.1A-1540 (Section 4.4.2).

Initial dislocation structure in annealed high-purity Mo single crystals and deformation substructure in a crystal subjected to 1% compression have been examined and studied using transmission electron microscopy (TEM) techniques in order to investigate dislocation multiplication mechanisms in the early stage of plastic deformation. The initial dislocation density is in a range of 10{sup 6} {approx} 10{sup 7} cm{sup -2}, and the dislocation structure is found to contain many grown-in superjogs along dislocation lines. The dislocation density increases to a range of 10{sup 8} {approx} 10{sup 9} cm{sup -2}, and the average jog height is also found to increase after compressing for a total strain of 1%. It is proposed that the preexisting jogged screw dislocations can act as (multiple) dislocation multiplication sources when deformed under quasi-static conditions. The jog height can increase by stress-induced jog coalescence, which takes place via the lateral migration (drift) of superjogs driven by unbalanced line-tension partials acting on link segments of unequal lengths. The coalescence of superjogs results in an increase of both link length and jog height. Applied shear stress begins to push each link segment to precede dislocation multiplication when link length and jog height are greater than critical lengths. This ''dynamic'' …

Laboratory facilities have made great strides in producing large sets of reliable data for X-ray astronomy, which include ionization and recombination cross sections needed for charge balance calculations as well as the atomic data needed for interpreting X-ray line formation. We discuss data from the new generation sources and pay special attention to the LLNL electron beam ion trap experiment, which is unique in it's ability to provide direct laboratory access to spectral data under precisely controlled conditions that simulate those found in many astrophysical plasmas. Examples of spectral data obtained in the 1-160 A wavelength range are given illustrating the type of laboratory X-ray data produced in support of such missions as Chandra, XMM, ASCA and EUVE.

Bioventing (BV) is a promising, cost-effective technology for the biodegradation of soil contaminated with petroleum hydrocarbons. The goal of BV is to stimulate naturally-occurring soil microorganisms to degrade organic contaminants in the soil. In natural systems the rate of biodegradation is eventually limited by the lack of oxygen and other electron acceptors (i.e., a compound that gains electrons during biodegradation) rather than by the lack of nutrients (i.e., electron donors). In conventional bioventing systems, oxygen is delivered by an electric blower to subsurface wells. The airflow rate is usually low in contrast to soil vapor extraction, just enough to provide sufficient oxygen to maintain or enhance microbial activity. In order to design a bioventing system wisely, decision makers should understand the role that design variables may play. Those design variables include locations of injection wells, injection rates, air pressure and moisture at wells, water table control, monitoring well locations, etc. Trade-off between these variables should be made before the implementation of a bioventing system. Obviously, the mathematical model corresponding to the multiphase flow and multi-species reactive transport is essential to describing the relations between design variables and system response. The work phases for the project are: (Phase 1) building biodegradation …

This document updates the Version Description Document with the changes incorporated in the Revision 11.2 software installation on the Tank Monitor and Control System (TMACS).

A prototype oligonucleotide ''functional chip'' has been developed to screen novel DNA repair proteins for their ability to bind or alter different forms of DNA. This chip has been developed as a functional genomics screen for analysis of protein-DNA interactions for novel proteins identified from the Human Genome Project The process of novel gene identification that has ensued as a consequence of available sequence information is remarkable. The challenge how lies in determining the function of newly identified gene products in a time-and cost-effective high-throughput manner. The functional chip is generated by the robotic application of DNA spotted in a microarray format onto a glass slide. Individual proteins are then analyzed against the different form of DNA bound to the slide. Several prototype functional chips were designed to contain various DNA fragments tethered to a glass slide for analysis of protein-DNA binding or enzymatic activity of known proteins. The technology has been developed to screen novel, putative DNA repair proteins for their ability to bind various types of DNA alone and in concert with protein partners. An additional scheme has been devised to screen putative repair enzymes for their ability to process different types of DNA molecules. Current methods to …

A microfluidic switch has been demonstrated using an AC Magnetohydrodynamic (MHD) pumping mechanism in which the Lorentz force is used to pump an electrolytic solution. By integrating two AC MHD pumps into different arms of a Y-shaped fluidic circuit, flow can be switched between the two arms. This type of switch can be used to produce complex fluidic routing, which may have multiple applications in {micro}TAS.

The D-Zero crane rail is analyzed for use as an anchor support for a one person Horizon{trademark} Horizontal Lifeline system that will span the pit area at D-Zero assembly hall. The lifeline will span 75 ft across the pit area, will be located out of the travel of the crane and above the concrete lentil wall. The crane rail is a suitable anchor for a one person Horizon TM Horizontal Lifeline system. The expected stress on the rail is 1,995 psi which has a factor of safety of 5.5 on the allowable stress. The anchor position is located 18 feet away from the concrete lentil wall and out of the travel of the overhead crane.

Debt Swapping as a Tool for Economic and Social Stablization in Russia's Closed Nuclear Cities

Public awareness of rock-fall hazard in Yosemite Valley has heightened after events in 1996 and 1999. Reports of audible blasts prior to rock-fall events suggest that rock cracking may in some instances precede the detachment a block from the cliff face. Seismic methods may be used to detect and locate small, inaudible rock cracking events, resulting in a catalog that outlines active areas and quantifies the level of activity. In order to test the feasibility of monitoring rock-fall activity with seismic methods, the Test Yosemite Rock-Fall Network (TYRN) was operated in the late summer and fall of 1999. The TYRN included five stations in the vicinity of the 1999 rock fall events: 2 stations at the base of the cliff and 3 above. Location of events depends on an estimate of seismic-wave velocity. During the TYRN deployment, a septic tank near Glacier Point was demolished, allowing the velocity of seismic P-waves to be calibrated. P-wave velocity was found to be about 5.68 km/s. Recordings of the explosion also allow assessment of arrival time precision, which controls the precision of seismic locations. Explosion recordings suggest that P-waves can be picked with a precision of about 0.005 seconds, suggesting that a seismic …

None

Data package supporting the 2001 Immobilized Low-Activity Waste Performance Analysis. Geology, hydrology, geochemistry, facility, waste form, and dosimetry data based on recent investigation are provided. Verification and benchmarking packages for selected software codes are provided.

The Fluor Hanford Chief Information Office requested that a computer-user survey be conducted to determine the user's dependence on the computer and its importance to their ability to accomplish their work. Daily use trends and future needs of Hanford Site personal computer (PC) users was also to be defined. A primary objective was to use the data to determine how budgets should be focused toward providing those services that are truly needed by the users.

Canceled see HNF-5841 Rev 0. This waste analysis plan (WAP) has been prepared for the Low-Level Burial Grounds which are located in the 200 East and West Areas of the Hanford Facility, Richland, Washington. This WAP documents the methods used to characterize, obtain and analyze representative samples of waste managed at this unit.

The Intelligent Systems and Robotics Center (ISRC) at Sandia National Laboratories (SNL) is developing technologies for glovebox size reduction in the DOE nuclear complex. A study was performed for Kaiser-Hill (KH) at the Rocky Flats Environmental Technology Site (RFETS) on the available technologies for size reducing the glovebox lines that require size reduction in place. Currently, the baseline approach to these glovebox lines is manual operations using conventional mechanical cutting methods. The study has been completed and resulted in a concept of the robotic system for in-situ size reduction. The concept makes use of commercially available robots that are used in the automotive industry. The commercially available industrial robots provide high reliability and availability that are required for environmental remediation in the DOE complex. Additionally, the costs of commercial robots are about one-fourth that of the custom made robots for environmental remediation. The reason for the lower costs and the higher reliability is that there are thousands of commercial robots made annually, whereas there are only a few custom robots made for environmental remediation every year. This paper will describe the engineering analysis approach used in the design of the robotic system for glovebox size reduction.

Radionuclide transport in soils and groundwaters is routinely calculated in performance assessment (PA) codes using simplified conceptual models for radionuclide sorption, such as the K{sub D} approach for linear and reversible sorption. Model inaccuracies are typically addressed by adding layers of conservativeness (e.g., very low K{sub D}'s), and often result in failed transport predictions or substantial increases in site cleanup costs. Realistic assessments of radionuclide transport over a wide range of environmental conditions can proceed only from accurate, mechanistic models of the sorption process. They have focused on the sorption mechanisms and partition coefficients for Cs{sup +}, Sr{sup 2+} and Ba{sup 2+} (analogue for Ra{sup 2+}) onto iron oxides and clay minerals using an integrated approach that includes computer simulations, sorption/desorption measurements, and synchrotron analyses of metal sorbed substrates under geochemically realistic conditions. Sorption of Ba{sup 2+} and Sr{sup 2+} onto smectite is strong, pH-independent, and fully reversible, suggesting that cation exchange at the interlayer basal sites controls the sorption process. Sr{sup 2+} sorbs weakly onto geothite and quartz, and is pH-dependent. Sr{sup 2+} sorption onto a mixture of smectite and goethite, however, is pH- and concentration dependent. The adsorption capacity of montmorillonite is higher than that of goethite, which …

The effects of varying the input for the CAP88PC Version 2.0 program on the total effective dose equivalents (TEDEs) were determined for hypothetical releases from the Hot Fuel Examination Facility (HFEF) located at the Argonne National Laboratory site on the Idaho National Engineering and Environmental Laboratory (INEEL). Values for site specific meteorological conditions and agricultural production parameters were determined for the 80 km radius surrounding the HFEF. Four nuclides, {sup 3}H, {sup 85}Kr, {sup 129}I, and {sup 137}Cs (with its short lived progeny, {sup 137m}Ba) were selected for this study; these are the radioactive materials most likely to be released from HFEF under normal or abnormal operating conditions. Use of site specific meteorological parameters of annual precipitation, average temperature, and the height of the inversion layer decreased the TEDE from {sup 137}Cs-{sup 137m}Ba up to 36%; reductions for other nuclides were less than 3%. Use of the site specific agricultural parameters reduced TEDE values between 7% and 49%, depending on the nuclide. Reductions are associated with decreased committed effective dose equivalents (CEDEs) from the ingestion pathway. This is not surprising since the HFEF is located well within the INEEL exclusion area, and the surrounding area closest to the release point …