This report provides a usable reference of methods and procedures for the construction of both one-sided and two-sided ..gamma../P statistical tolerance limits for design application to both linear and nonlinear models in any number of variables.

ASBLT is a computer program consisting of DATATRAN MODULES which was used during the manufacturing phase of LWBR to collect and evaluate as-built data. The program was part of the LWBR fuel rod inspection process and produced sections of module assembly certification reports. ASBLT used fuel pellet, fuel rod and module assembly data to compute core inventories and to supply input to nuclear design programs for as-built core calculations.

Critical heat flux experiments were conducted for upflow of water in a vertical 84 inch annular flow channel, 0.303 inch heated I.D. and 0.500 inch unheated O.D. Test data were obtained at pressures from 1200 to 2000 psia, mass velocities from 0.25 x 10/sup 6/ to 2.8 x 10/sup 6/ lb/hr-ft/sup 2/ and inlet temperatures ranging from 200 to 600/sup 0/F. Three different test sections were employed with (1) axially uniform heat flux over the 84 inch length to serve as a no-hot-patch data base, (2) axially uniform heat flux over 82 inches with a 1.5 heat flux ratio hot patch over the last two inches, and (3) axially uniform heat flux over 82 inches with a 2.25 heat flux ratio hot patch over the last two inches.

METER is a Monte Carlo computer program which can be used to simulate the interaction between independent random variables and their effects on one or more dependent random variables. The program is easy to use for simple simulations but is capable of accommodating complex simulations. METER processes input, generates random numbers from several common frequency distributions under user control, performs the simulation which the user has coded in FORTRAN, and displays results.

The low-temperature (less than or equal to 550/sup 0/C), low-pressure (less than or equal to 36 torr) hydrogen absorption characteristics of specific types of Zircaloy-4 internal cladding surfaces (pickled, machined and welded) were investigated. The highest hydrogen contents were found at the machined and abraded surfaces. Although the pickled surface film on Zircaloy-4 retarded hydrogen pickup, especially at lower temperatures (less than or equal to 400/sup 0/C) and very low hydrogen pressures (less than or equal to 3.5 torr), some hydrogen was absorbed through the film even under these conditions. More hydrogen penetrated the pickled surfaces at higher temperatures and pressures. The pickled surfaces absorbed the hydrogen uniformly and without localization even with some film imperfections present. Little hydriding occurred when etched and welded Zircaloy-4 surfaces were exposed to water vapor at corrosion temperatures.